ReviewsHose Barbs With Lock Ring

ACDelco 91002 Professional Power Clean Cooling System Flush Tool Kit

Equipped with a pulsating gun assembly with a pre-set regulator for accuracy.
Hinders water line backflow to lessen water pump damage.
Large rubber tip for radiator necks and direct flushing of the engine block.
Small rubber tip on the whip hose for direct access to the heater core tube stubs.
5?8 in and 3?4 in heater hose barbs for flushing heater cores or engine blocks.

Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)

【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..

Check Stock

TSTabc Inline beer filter Home Brewing Hose Barb in-Line Strainer 180 micron 80 mesh Water & Beer Filtering White

Removes sediment.Perfect for large batches and dry hopped beers..
No Taste-spoiling aeration or chemicals. Save time and beer..
Include 6 hose barbs 1/2"(12mm) hose barb, 3/8"(9mm)hose barb, 1/4"(6mm)hose barb available..
Screen: 180 micron / 80 mesh Max Operating Temperature: 65C/150F Max Operating Pressure: up to 150 psi.

Check Stock

Dometic SeaStar Classic Tilt Hydraulic Steering Kit, HK6400TC-3

Hydraulic Steering Kit without hoses (ordered separately ho51xx where xx equals hose length in feet).
Updated System includes Positionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing and NEW End Gland Sealing System for maximum protection from saltwater and compression set.
5 turns lock-to-lock with 1.7 Cubic Inch Displacement Helm (included) for maximum steering comfort.
Robust Barrel design and NEW graphics compliment new boats and motor packages..
48 Degrees of Tilt Articulation, 5 Positive Lock Positions and Factory Installed Lubrication ensure Smooth Operation and Feel.

Check Stock

LDR 515 B5003S Braided Vinyl Hose Tubing, 1/2-Inch ID X 3/4-Inch OD, Clear, 100-Foot Spool

Ideal for oil, fuel, air and water lines and food/beverage dispensing.
Braided vinyl hose - made from Polyvinyl Chloride with Polyester Braiding.

Check Stock

LDR 515 B5002S Braided Vinyl Hose Tubing, 3/8-Inch ID X 5/8-Inch OD, Clear, 150-Foot Spool

Ideal for oil, fuel, air and water lines and food/beverage dispensing.
Braided vinyl hose - made from Polyvinyl Chloride with Polyester Braiding.

Check Stock

FIILPOW Retractable Garden Hose Reel 82 FT 5/8", Wall Mounted Water Hose Reel with Automatic Rewind System, Any Length Locked, Brass Fittings, 180° Swivel, 8 Patterns Nozzle for Garden Watering

DOUBLE-LOCK DESIGN: The hose can be locked at any length you desire by simply pulling it out until the required length.
there is no need to pull the hose all the time, it's really labor-saving.
when retracting or replacing the hose, you can press the safety lock on the side panel to lock the hose to provide more safety for children and seniors.
AUTOMATIC & SAFE RETRACTION: When you pull the hose a little harder, the entire hose will be retracted and tucked automatically inside the housing within 12-15 seconds.
the guidance system inside can make sure that there is no tangling and it can withstand at least 3000 rewinds by strictly testing.
PREMIUM & DURABLE MATERIAL: It adopts new-polymer hose that is freeze-proof, explosion-proof, and weather-resistant, and can withstand the maximum water pressure of 350PSI, making you work worry-free.
the connectors of the inlet hose and outlet hose are made of solid brass with a waterproof rubber ring to ensure no rust and leakage.
WALL-MOUNTED HOSE REEL: FIILPOW 5/8" 82 ft hose reel with a mounting bracket makes it easy to install and remove the reel, allowing up to 180....

Check Stock

Dometic SeaStar 1.7 Helm, HH5271-3, Front Mount

Convenient front of dash fill which can be retrofitted into an old SeaStar 4.5" hole cutout.
Positionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing.
Compact helm has only a 4-7/16" footprint and needs only a 3” dash hole.
4.9 turns lock-to-lock in most typical single cylinder outboard applications.
INSTALLATION NOTE: Do NOT attempt to install an NPT pipe fitting into a -3 helm hose fitting port. Doing so will lead to irreparable damage to the helm.

Check Stock

Radiator Hose Clamp Pliers Tool - Clamp Tight Wire Tool with 24 Inches Cable - Hose Clamp Removal Tool and Ring Clamp Pliers - Hose Pinch Pliers Type or Flat-band Tools - Wire Long Clip Removal Tool

Premium Quality Hose Pliers : Our hose removal pliers mechanic tool is made of high-quality carbon steel with firm grip handles double dipped in rubber for the removal of flat-type or ring-type hose clamp tool, hose removal tool is anti-rust and corrosion-resistant.
Application of Hose Grip Pliers: This pinch clamp tool can lose clamps on cars, removes factory spring hose clamp pincer, coolant hose clamps pliers and radiator hoses, automotive clamp allow technicians to access flat hose clamps in hard-to-reach areas.
Lock Function of Wire Remover: The hose remover pliers have a ratchet lock that will hold the wire clamp compressed, which can make this hose clamp remover tool a one-handed affair and helps locking pliers mechanism to remove and install metal with ease.
Easy Operate Wire Clamp Tool: Radiator hose removal has flexible pipe repair clamp tongs that make the removal and installation of the clip easier, non-slip handles of radiator hose clamp tool assures steady grip, small size makes pliers hose easy to carry.
Package Includes - Our automotive clamps tools pack for mechanics includes 1 pieces of flexible hose clamp pliers, pliers size is 3.74 x 8.3 inches (W x L), wire clamps tool is suitable for clamps with a diameter of 0.7 - 2.1 inches..

Check Stock

Dixon PTLS10040 FNPT Poly T-Line Strainer, 40 Mesh, 1\ ID, Polypropylene

Improves the taste and clarity of your beer by filtering trub, krausen, hops, and proteins..
Saves time and beer, pays for itself in a few batches, get more beer out of each batch, easier and quicker than cold crashing or additives..
Made of high quality material, rugged and durable for repeated use, the maximum operating temperature is 150℉..
Easy to use and clean, gravity fed using your racking siphon, no need to pressurize or pump, fewer parts to clean, fits 3/8in inner diameter siphon tubing (standard size)..
Perfect for large batches and dry hopped beers. Include 2 hose barbs, 1/2in(12mm) hose barb, 1/4"(6mm)hose barb available..

Check Stock

X AUTOHAUX 4pcs AN10 Hex Car Hose Finisher Flexible Rubber Pipe Clamp with Screw Band Adapter Fitting for Oil Fuel Water Tube Purple

HIGH QUALITY: Our auto Hose Clamp Plier is made by heavy duty carbon steel with firm grip rubber handles for fuel & coolant pipe spring line clip..
CAPACITY: This flexible hose clamping tool kit is with a max opening of 1-3/4 inch, which can be used on most ring-type or flat-band hose clamps for easy removal and installation..
LOCKING FEATURE: Locking ratchet that holds the clamp open for easy/quick installation and removal. Tips swivel to allow access in confined areas and can be used at any angle. Finger tip "position lock" makes it easy to replace the lower radiator hose..
WIDE APPLICATION: The long reach of these plyers allows you to work in confined and tight spaces. Our automobile hose cable clamp remover and release tools can get into those narrow spaces and get the job done with ease!.
EFFICIENT: Non-slip handle assure steady grip and decrease hand fatigue during use. The ratcheting action is smooth and releases when you want it to. Lock it in place and it just stays allowing you to move the hose clamp wherever you want. It is great for a backyard mechanic..

Check Stock