ReviewsHose Barbs With Push lock

ACDelco 91002 Professional Power Clean Cooling System Flush Tool Kit

  • Equipped with a pulsating gun assembly with a pre-set regulator for accuracy.
  • Hinders water line backflow to lessen water pump damage.
  • Large rubber tip for radiator necks and direct flushing of the engine block.
  • Small rubber tip on the whip hose for direct access to the heater core tube stubs.
  • 5?8 in and 3?4 in heater hose barbs for flushing heater cores or engine blocks.
Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)

  • 【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
  • 【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
  • 【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
  • 【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
  • 【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..
Check Stock

TSTabc Inline beer filter Home Brewing Hose Barb in-Line Strainer 180 micron 80 mesh Water & Beer Filtering White

  • Removes sediment.Perfect for large batches and dry hopped beers..
  • No Taste-spoiling aeration or chemicals. Save time and beer..
  • Include 6 hose barbs 1/2"(12mm) hose barb, 3/8"(9mm)hose barb, 1/4"(6mm)hose barb available..
  • Screen: 180 micron / 80 mesh Max Operating Temperature: 65C/150F Max Operating Pressure: up to 150 psi.
Check Stock

LDR 515 B5003S Braided Vinyl Hose Tubing, 1/2-Inch ID X 3/4-Inch OD, Clear, 100-Foot Spool

  • Ideal for oil, fuel, air and water lines and food/beverage dispensing.
  • Braided vinyl hose - made from Polyvinyl Chloride with Polyester Braiding.
Check Stock

LDR 515 B5002S Braided Vinyl Hose Tubing, 3/8-Inch ID X 5/8-Inch OD, Clear, 150-Foot Spool

  • Ideal for oil, fuel, air and water lines and food/beverage dispensing.
  • Braided vinyl hose - made from Polyvinyl Chloride with Polyester Braiding.
Check Stock

attwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump

  • 800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
  • Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
  • SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
  • No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
  • Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
  • Includes straight outlet and check valve.
Check Stock

DELTA FAUCET RP31612 Replacement Hose/Spray, Chrome

  • MULTI-USE PORTABLE HANDHELD SINK SPRAYER: With 2 easy steps, you can make an extension of your existing faucet with our Easy Spray Handheld Sink Sprayer. Create ease for yourself when it comes to washing your hair, bathing your baby, washing your dog and washing your vegetables. You can even use it for hand washing clothes or other items in your kitchen sink. This is a great alternative to use for your kitchen sink and BEST FITS traditional non-pull down faucet fixtures..
  • STEP 1: Remove your old aerator from the faucet spout and install the new aerator (included in packaging) in its place to attach sprayer. The included aerator fits a 15/16" outside thread and 55/64" inside thread (27 NPT).
  • STEP 2: Align tabs on quick-connector adapter with markings as guides to gently push adapter up into aerator and turn to lock hose in place with a ¼ turn to the right.
  • QUICK AND EASY STORAGE WITH REMOVABLE HOSE: To remove hose, turn water off at faucet source, gently push up on hose and turn clockwise a 1/4 turn to the left to release from aerator..
  • EASY TO USE WITH ON/OFF TOGGLE SWITCH: The handheld portable sprayer has a convenient on/off toggle switch that allows you to control the water flow from light to full, depending on your needs..
Check Stock

Dixon PTLS10040 FNPT Poly T-Line Strainer, 40 Mesh, 1\ ID, Polypropylene

  • Improves the taste and clarity of your beer by filtering trub, krausen, hops, and proteins..
  • Saves time and beer, pays for itself in a few batches, get more beer out of each batch, easier and quicker than cold crashing or additives..
  • Made of high quality material, rugged and durable for repeated use, the maximum operating temperature is 150℉..
  • Easy to use and clean, gravity fed using your racking siphon, no need to pressurize or pump, fewer parts to clean, fits 3/8in inner diameter siphon tubing (standard size)..
  • Perfect for large batches and dry hopped beers. Include 2 hose barbs, 1/2in(12mm) hose barb, 1/4"(6mm)hose barb available..
Check Stock

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

  • Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
  • Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
  • The PTFE hose end is reusable, just  replace a new ferrule if you reinstall the fitting..
  • EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
  • Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Eastman 12 Inch Flexible Toilet Connector Stainless Steel Braided Hose with 7/8 Inch Ballcock Nuts 3/8 Inch Compression 48088

  • UNIVERSAL TOILET CONNECTION HOSE: The toilet supply line extension features a non-toxic PVC core, a multi-filament braided nylon reinforcement, a....
  • LEAK FREE: Toilet tank water supply line is equipped with full flow brass barbs and chrome-plated solid brass ballcock nuts to prevent leaks.
  • EASY INSTALLATION: Toilet pipe connector is a universal fit, standard in water supply lines, and is easy to install in tight spaces.
  • DURABLE: Toilet inlet hose features grade 304 stainless steel braided exterior for long-lasting reliability.
  • SPECS: Toilet fill hose features a working temperature is 40 degrees F to 150 degrees F.
Check Stock

Da by 2 pcs 3/8 10mm Brass Tee Barb Fittings for 3/8 ID Hose,6 pcs Stainless Steel Pipe Clamps,3 Way Union Intersection for Water/Fuel/Air T

  • Packaging Includes:2 Brass hose barb tee fittings, they have three barb 3/8" x 3/8" x 3/8", 6 Stainless steel pipe clamps fit hose outer diameter of 13mm-19mm..
  • Material: Hose barb made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
  • Solid Connections:The T shaped hose barb can be solid connected to the hose(Fit hose witch inner diameter of 10mm),The pipe clamps can create a tight seal on flexible or semi-rigid hose..
  • Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
  • Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged..
Check Stock