ReviewsHose Clamps And Clips

Swpeet 121Pcs 7-22mm Spring Band Hose Clamps with CV Boot Hose Clip Pliers Assortment Kit, Silicone Vacuum Hose Action Pipe Clamp Low Pressure Air Clip Clamp for Hose Clamps

  • What You Get --------- In this kit, You will get 120Pcs 12 Sizes Assorted Spring Band Hose Clamps, Including 7mm.
  • 22mm. Have 12 Sizes and each sizes 10Pcs. Including 1Pcs CV Boot Hose Clip Pliers. These Tool kit can meet all your daily needs..
  • A Good Hose Clip Pliers ----- Designed for quick and easy removes and installs clic and clic R hose clips. Clic r clamp is good tool for the job as a automotive tech.Use this crimping pliers daily makes takes clips off easy and is practical for personal use. PVC Handle Design, Handles covered by plastic for comfort and grip when using cv boot clamp pliers..
  • High Quality ------ Spring Clips Made of high quality 65Mn Spring Steel, anti-corrosion and durable for long time use. Great product for your fuel line repairs. Great price and quality. These pliers are constructed from high carbon steel with a Manganese Phosphate coating to prevent rust and corrosion. Highly recommend..
  • Great Value for Kit, Get The Right Tool, Much Easier ------------ Perfect for lower or medium pressure. Get the right tool to install or remove. Work best o....
Check Stock

MIAHART 6 inch Hose Clamp Adjustable 304 Stainless Steel Duct Clamps Worm Gear Adjustable 141mm-165mm Hose Clamp (Pack of 6)

  • Package includes 6pcs 6-inch hose clamps,adjusts diameter from 141mm - 165mm(5.5-6.5inch).
  • Design: can lock the hose very tightly, leak-proof, and ensure of clamps long-lasting, lock construction.
  • Material: made of 304 stainless steel, corrosion-resistant, will not rust for long-term use.
  • Easy to use: use a screwdriver to loosen or tighten the screw of hose clips then adjust the size, Secures ducting tightly in place(Note: the screwdriver not included).
  • Application：6 inch duct clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines in automotive, industrial, mechanical, agriculture, boat/marine, shield, household, etc.
Check Stock

ZIPCCI Hose Clamp, 1 - 2 Inch Worm Gear Hose Clamps Stainless Steel for Fuel Line, Pipe, Radiator, Tube and Fuel Line, 27-51mm (15pack)

  • Package includes: 16 pieces 1-1/2 inch hose clamps..
  • Hose clamp clamping ranges from 27 to 51mm (1 to 2 inches)..
  • 304 Stainless steel hose clamp provides maximum corrosion resistance to salt and most chemicals..
  • Pipe clamps are flexible and ductile for a variety of applications for marine, auto, water pipes, fuel lines, etc....
  • Use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place to prevent flow leakage..
Check Stock

Hose Clamp 10 Pack 304 Stainless Steel Adjustable 6-51mm Range Worm Gear Hose Clamp Fuel Pipe Clamps for Automobiles Pipelines and Mechanical Application

  • Durable Material: made of high quality 304 stainless steel, rust-proof, water-proof, corrosion-resistant, ​strong,Clamps are sturdy, durable and long lasting use..
  • Size Range-The hose clamp is flexible and extensible, with adjustable width, and the size range is from 6-51mm (1 / 4in-2in). The hose clamp width ranges from 8mm to 12mm, suitable for fixing pipes of various sizes.Fit Hose Diameter: 6-12mm, 9-16mm, 13-19mm,18-29mm, 27-51mm（5 sizes and 10 pcs)Handy and fulfill your multi needs..
  • Easy to use: use a screwdriver to loosen or tighten the screw of hose clips then adjust the size, Secures ducting tightly in place.enough for your spare and replacement in daily life around you house, garage, lawn and garden..
  • Widely used- Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc.These stainless steel hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage..
  • We believe that our high quality Hose Clamp will exceed your expectations. If you have questions, please contact us any time. We will try our best to solve your problems..
Check Stock

18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These....
Check Stock

20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 5/16’’ (8mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #10 hose clamps have adjustable clamping range of 1/2" to 1-1/16"(12mm-27mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can....
Check Stock

Winlong Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing 1/4 Hose Clamps 1/2 Hose Clamps

  • Premium Materials: Winlong hose clamps are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. Winlong stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • Winlong hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: Winlong size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: Winlong hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. Winlong worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 16 Clamping Range 3/4 Inch to 1-1/2 Inch (19mm-38mm) for Automotive Plumbing, 3/4'', 1'', 1 1/4'' Hose Clamps

  • Premium Materials: WINL SAE 16 hose clamps of 19mm-38mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size #16 hose clamps have clamping range from 3/4 inch to 1-1/2 inch (from 19mm to 38mm), great for hose or pipes within this range, perfect as 3/4 inch hose clamps,7/8 inch hose clamps,1 inch hose clamps,1 1/5 inch hose clamps, 1 1/4 inch hose clamps etc. . The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 16 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without ....
Check Stock

Hose Clamp Plier Auto Repair Tool Swivel Flat Band for Removal and Installation of Ring-Type or Flat-Band Hose Clamps

  • These are professional quality Hose Clamp Pliers that feature high carbon steel with firm grip handles double dipped in rubber for heavy-duty use for the easy removal of flat-type or ring-type hose clamps..
  • With a max opening of 1-3/4”,these Hose Clamp Pliers can be used on most ring-type or flat-band hose clamps for easy removal and installation..
  • Tested and approved for strength, durability, and fit..
  • Tips trap and hold clamp and swivel for multiple angle access..
  • For fuel & coolant pipe spring clips, suitable for all kinds of vehicle.
Check Stock

WINL Stainless Steel Hose Clamps - 22 Pack Worm Gear Drive Hose Clamps Micro Size 6 Clamping Range from 5/16 Inch to 7/8 Inch 8mm-22mm for Automotive Plumbing 1/2 Hose Clamps 3/4 Hose Clamps

  • Premium Materials: WINL size 6 hose clamps of 8mm-22mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The micro size #6 hose clamps have clamping range from 5/16 inch to 7/8 inch (from 8mm to 22mm), great for hose or pipes within this range, perfect as 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps, 5/8 inch hose clamps, 3/4 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: WINL size 6 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burr....
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 10 Clamping Range of 1/2'' to 1-1/16'' (13mm-26mm) for Automotive Plumbing, ,1/2 Inch, 3/4 Inch,1 Inch Hose Clamps

  • Premium Materials: WINL size 10 hose clamps of 13mm-26mm are all 304 stainless steel ( including band, housing and screw) to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. WINL stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size#10 hose clamps have clamping range from 1/2 inch to 1-1/16 inch (from 13mm to 26mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc.. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 10 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
Check Stock