ReviewsHose Fitting Clamp

TAISHER 10PCS Brass Hose Barb Fittings 3/8 Inch to 1/4 Inch Barb Hose, Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel with 20PCS Hose Clamp

[ MATERIAL ] High quality solid brass, firm and durable, brass is corrosion resistant. This pipe fitting can apply to water, air, gas, oil and fuel..
[ HOSE CLAMP ] Worm Gear Hose Clamp with 8mm width adjustable stainless steel band. The extended band liner to protect the hose from damage caused by extrusion. Connection fasteners for water, oil, gas, hydraulic hose..
[ OPERATING TEMPERATURES ] Temperature range from -65 to +250 degrees F..
[Function] Used to connect hoses of different diameters. The hose barb can be firmly connected to the hose, and the hose clamp can form a tight seal on the flexible or semi-rigid hose..

Check Stock

Selizo 12Pcs Hose Clamps 4 Inch Hose Clamp 304 Stainless Steel Hose Clamps Duct Clamp Worm Gear Adjustable 91-114mm Hose Clamp Fuel Line Clamp for Plumbing Automotive and Mechanical Applications

PACKAGE INCLUDES: The stainless hose clamp kit comes with totally 12 pieces hose clamps with adjustable size range from 91 mm to 114 mm, perfect for hose outside diameter 91-114mm / 3.6-4.4 inch.
304 STAINLESS STEEL HOSE CLAMP –The hose clamp is made of high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust, anti-corrosion, water proof, oil proof than other 201 stainless steel. Solid and sturdy material ensure the adjustable hose clamps last a long time for use.
FLEXIBLE ADJUSTABLE SIZE RANGE – The 4-inch hose clamps stainless steel can be adjusted from 91-114mm / 3.6-4.4 inch. Flexible and ductile for use.
EASY TO INSTALLL AND REUSABLE – The stainless clamps designed with a worm gear mechanism to adjust the clamp’s diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage. The clamp hose also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
WIDELY USED – The spring hose clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications.

Check Stock

DRIVESTAR 39120 Belt Tensioner with Pulley for Dodge Ram 1500/Dakota/Durango,for Jeep Grand Cherokee/Liberty 3.7L 4.7L

♛ HIGH QUALITY ---- High quality Zinc Plated Steel hose clamp, plating zinc, Can resist the corrosion and rust in marine environments. The hole technology makes its screw tightly bite the steel band..
♛ EASY To USE ---- Just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
♛ ENVIRONMENTAL FRIENDLY ---- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
♛ WORKING GREAT ---- These hose clamps are just what you need when you have to make repairs to your home or automobile. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
♛ WIDE ADJUSTABLE SIZE RANGE ----Clamp kit are flexible and ductile with wide adjustable size range from 7 to 18mm. Fit Hose Diameter: 7-9mm: 15Pcs.
16-18mm: 10Pcs. So many sizes are enough for daily needs..

Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

...Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Swpeet 100Pcs 8-44mm Adjustable Range Assorted Sizes Assortment Hose Clamps Kit, 100% 304 Stainless Steel Adjustable Range Worm Gear Hose Clamp Perfect for Plumbing, Automotive

...u don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
♛ WITH A WRENCH EAST To USE ---- Just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw.Perfect to apply in such both indoor or outdoor situations as automotive, industrial, boat/ marine, shield, household and so on..
♛ SAVE TIME AND MONEY ---- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long.These stainless steel hose clamps are installed on the joints of the hose joints to prevent fluid leakage, saving expensive repair time and money..

Check Stock

Swpeet 50Pcs 10 Sizes 304 Stainless Steel Mini Fuel Injection Line Style Hose Clamp Assortment Kit Perfect for Automotive, Agriculture, Plant & Construction

♛ EASY To USE ---- Just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
♛ ENVIRONMENTAL FRIENDLY ---- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
♛ HIGH QUALITY ---- High quality 304 Stainless Steel hose clamp, Can resist the corrosion and rust in marine environments. The hole technology makes its screw tightly bite the steel band..
♛ WORKING GREAT ---- These hose clamps are just what you need when you have to make repairs to your home or automobile. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
♛ WIDE ADJUSTABLE SIZE RANGE ----Clamp kit are flexible and ductile with wide adjustable size range from 7 to 18mm. Fit Hose Diameter: 7-9mm: 5Pcs.
16-18mm: 5Pcs. So many sizes are enough for daily needs..

Check Stock

Ripeng 200 Feet 40 Pieces Hoses Clamps, Worm Gear Clamps Stainless Steel Adjustable Duct Hose Large Clamp for Intercooler, Pipe, Plumbing, Tube and Fuel Line, 43 Inch

..., tightly locked and with large adjustment range, provides sealing performance and helps to solve the problem of liquid gas leakage.
Convenient to Use: you just need to loosen or tighten the screw of the hose clip by a screwdriver to adjust the size, attach the hose to the fitting tightly, and it can be applied to secure hoses, pipes, cable, tubes, etc.

Check Stock

JoyTube 5 Pcs Hose Barb Fittings 3/8 Barb to 1/2 NPT Male Thread Brass Metals Adapter Connector with Hose Clamp

Brass barbed hose fitting is for connecting 3/8" barb hoses, NPT male end used to connect 1/2" NPT female pipes fitting..
Made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion, low magnetic permeability, ductility at high temperatures, which can withstand up to -40 to +160 degrees F..
When used with a hose clamp or crimp sleeve or ferrule, the hose barb fitting can creates a better tight seal..
Brass barbed fitting kits can be used with PVC, PU, Rubber hose or tubing, Which can apply to water, gas, oil and fuel as well as air tools..

Check Stock

Anderson Metals-07003-0808 Brass Hose Fitting Swivel Connector 1/2 Barb x 1/2 Male Pipe

Connects low-pressure hose to threaded pipe with a ball swivel for an adjustable angle.
Fitting connects to hose on one end and has an NPT male connector on the other.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).

Check Stock

Medoon 10ft 10AN Black Nylon And Stainless Steel Braided Fuel Oil Hose Fuel Line 10pcs 10AN Hose Fitting Kit 6pcs 10AN Hose Separator Clamp 2pcs 10AN to 10AN Male Coupler Adapter Straight Fitting

100% QUALITY MATERIAL:Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum..
EFFECTIVELY:The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.10an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on..
USEFUL:Inner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life.Working Temperature: -40 F to 257 F(-40°C to +125°C) under most operating. Working Pressure:500 PSI.
Package Including:10pcs 10AN hose fitting + 10Ft AN10 Stainless Steel Oil line + 6pcs 10AN Hose Separator Clamp + 2pcs 10AN male coupler.
100% SATISFACTION:If you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem..

Check Stock

Swpeet 60Pcs Assorted Sizes Hose Clamps Kit, 304 Stainless Steel Adjustable 6-38mm Range Worm Gear Hose Clamp Perfect for Plumbing, Automotive And Mechanical Applications

♛ HIGH QUALITY ---- High quality 304 Stainless Steel 304 hose clamp, plating zinc, Can resist the corrosion and rust in marine environments. The steel adopts hole technology makes its screw tightly bite the steel band..
♛ WORKING GREAT ---- These hose clamps are just what you need when you have to make repairs to your home or automobile. It comes with a wide variety of clamp sizes so you don't have to concerned about which size you need, you can just try it until it fits. These hose clamps did get the job done well, no leaking at all..
♛ EAST To USE ---- Just need use a screwdriver to loosen the screw of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
♛ ENVIRONMENTAL FRIENDLY ---- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long..
♛ WIDE ADJUSTABLE SIZE RANGE- Clamp kit are flexible and ductile with wide adjustable size range from 6 to 38mm/0.24-1.5 inches. Fit Hose Diameter: 6-12mm: 10Pcs.
21-38mm:5Pcs. So many sizes are enough for daily needs..

Check Stock