ReviewsHose Fitting With Male Pipe Threads

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

⚒【PREMIUM MATERIAL】- Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The Fire Equipment Hexagonal Nipple Fitting offer long-term service.
⚒【CONNECTION SIZE】- Hex nipple fitting 1-1/2" NH/NST to 1-1/2" NPT double male fire hose adapter. Male 1-1/2 inch NH / NST will only connect to a female 1 1/2 inch NH / NST.
Male 1-1/2 inch NPT will only connect to a female 1-1/2 inch NPT/NPSH.
⚒【UNIQUE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you ....

Check Stock

Master Airbrush Brand 100 Pipette Eyedroppers for Liquid Transfer and Airbrush Paint

Master Airbrush Brand Airbrush Fitting Conversion Adapter for Badger Airbrushes.
Converts a Badger airbrushes male M5 0.5 mm thread size to standard 1/8" BSP male thread size for easy connection to 1/8" BSP air hoses.
Adapter has 1/8" BSP male threads on the outside and Badger size female threads on the inside.
The adapters 1/8" BSP hose thread size is the most common hose fitting size used for many popular airbrush brands like Master and Iwata.

Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Gray Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Thread Reducer Bushing 2" Male x 1-1/2" Female Adapter Pipe Fitting with Stainless Steel 304 NPT

Maximum working pressure of 150 psi at 70 degrees F.
NPT thread for creating tighter seals than straight threads.
Shape:Reducer Bushing(Male x Female),Connection:NPT-NPT,Measurement:2"x1-1/2".
This adapter fitting connects pipes or fittings with different end types, diameters, or materials.
It has male NPT threads on one end and female NPT threads on the other for connecting to a female and a male threaded pipe or fitting..

Check Stock

Hose Fitting SUNGATOR Brass Hose Barb Fitting Adapter 1/4 Barb x 1/4 NPT Male Pipe 4-Pack

【PREMIUM MATERIAL】: SUNGATOR selects high quality solid brass, firm and durable, brass is corrosion resistant and can be used in wet environments, 1/4”barb X 1/4”NPT male pipe, 4 pack.
【DURABLE】: The barb fitting is not a cast product and has a longer service life.
【SUPERIOR THREADS】: Barbed edges provide excellent connection, deeper and smoother threads design makes work easier and more effective.
【FUNCTION】: A barb (or hose barb), which connects flexible hose or tubing to pipes, one side is used to connect hoses while the other side is used to connect to NPT pipes, especially for small rubber hoses and plastic hoses as well as air tools.
【OPERATING TEMPERATURES】: Solid brass can withstand up to 100 °C (212 °F).

Check Stock

AC PERFORMANCE Stainless Steel -3 AN 3/8x24 Male Flare Union Splits Tee Block With Lug/Mount Tab/Locator, -3 AN to 2x AN3 Male Flare Coupling Union All Sides Hose Fitting

Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8×24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter.
Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application.
AN Male Flare Tee Tube Fitting with Locating Lug Mount Hole.
Male -3AN flare all sides Tee cross 3 ways pipe with lug tab locator SL fitting connector.

Check Stock

uxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8

APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
-30 degree to 100 degree F temperature range..
BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
Size: 16mm or 5/8″ Barb x 3/4″ G Male.

Check Stock

Atima Extended Run Fuel Cap Fits Gas Generator for Honda Eu2000i Eu2200i 662220 Eu2200ic 662230 EB2200i,Westinghouse 2200watt WH2200iXLT,Rainier R2200

STRUCTURE: 1/4" NPT female threads accept brass 90 degree street elbow or any fuel fitting that has a 1/4" NPT male thread, and brass hose connect in....
Usage: connect the brass hose of the gap with a oil-conveying pipe, and you can add into gasoline in a long distance..
CORROSION RESISTANCE: CNC machined from solid billet aluminum and silver anodized to ensure resistance to corrosion.
SIMPLE AND CONVENIENT: With its diamond pattern grip, everyone can lock and remove easily. 1/4" NPT female threads accept brass 90 degree street elbow....
COMPATIBLE WITH: Honda EU1000i, EU2000i, EU2200i 662220,EU2200ic 662230,EU3000iHandi,Westinghouse 2200watt WH2200iXLT Gas Generator.

Check Stock

Anderson Metals 57001-0604 Brass Hose Fitting Adapter 3/8 Hose ID x 1/4 NPT Male

Adapter for connecting a hose to a male threaded connection of a different diameter.
Hose barb on one end and male NPT threads on the other.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Bonbo Fuel Gas Cap with Brass Hose for Honda EU2200i EU1000i EU2000i EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT Generators, Upgrade Extended Run (Red)

Application - This fuel gas cap can be widely used in Honda EU2200i EU1000i, EU2000i, EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT generators..
Function - As a fixed connection between plastic or rubber hose and pipe, this gas cap with brass hose fitting helps you add gasoline into generator within a safe distance, ensuring seal tight and no leakage..
Design - The brass hose fitting has a 1/4" male end for connecting to threaded pipe, conforming to National Pipe Thread (NPT) standard and the barbed fitting for a hose is equipped with a 1/4" inside diameter..
Material - The gas cap is made of premium CNC billet aluminum, finishing with stylish anodized red coat. And the hose fitting is made of top high quality and wear resistance brass, performing well even under extreme conditions..
Satisfaction Guarantee - Bonbo aims to provide best products and services for our customers. If you receive broken or defective gas cap and brass hose fitting, please contact us any time, we will compensate you with 1 year warranty or 30 days full refund..

Check Stock

Legines 1/4 NPT Male to 3/8 Barb Fitting Brass Barbed Adapter Straight Connector 2 pcs

Barb adapter for connecting a 3/8" hose to a 1/4" npt male threaded connection of a different diameter.
Hose barb on one end and male NPT threads on the other.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock