ReviewsHose Pipe Extrusion Line

Kinchoix 24" Flexible Yellow Coated Gas Hose Connector Kit for Stove Dryer Furnace Gas Water Heater Flexible Gas Line with Connector 3/4" FIP & 3/4"MIP Fitting

  • 「WHAT YOU WILL GET」- The gas hose connector kit mainly includes a 24in gas hose, 2 pc 15/ 16 -16 UN x 3/4'' FIP, 2 pc 15/ 16 -16 UN x 3/4'' MIP (Tapped 5/8'' FIP) and a sealing tape. Factory leak tested 100% pass!.
  • 「COMPATIBLE WITH」- A stainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 1'', inner diameter 3/4''. Thicker pipe diameter can transmission gas quickly..
  • 「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 3/4" male brass fittings on both end, standard male and female pipe threads for easy connection..
  • 「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose..
  • 「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused f....
Check Stock

uxcell Double Wire Spring Hose Clamp 6mm Inner Dia Fit 6.5-7.2mm OD Hose Fuel Line Silicone Tube Spring Clips Zinc Plated 20Pcs

  • ☆【PRODUCT INFORMATION】--- In this set, we prepared 11 different sizes hose clamps for you, hose diameters includes: 7/8/9/10/11/12/13/14/15/16/17mm, 5-pcs each size, 55pcs in total, package in durable transparent plastic box, widely used them on a number of hoses that it can reducing the chances of a fuel or water pipe leak..
  • ☆【DURABLE AND STURDY】--- These spring hose clamps are made of high quality 65mn spring steel, which is strong and sturdy, corrosion resistance in a humid environment, it can be stored for a long time, have highly sealed, the surface of clamps are polishing that can effective prevent pipe damage.
  • ☆【WIDE APPLICATIONS】--- Spring hose clamps are used in a wide range of applications, suitable for hose/gas pipe/air hose/water pipe/automotive fuel line/silicone hose, connection fastening, etc..
  • ☆【EASY TO USE】--- You can easily move these on the tubes with your fingers, using pliers to open the surface and easily lower it on the tube, it can be reused, come with durable transparent box enough to accommodate all clamps in case of lost..
  • ☆【CUSTOMER SERVICE】--- We will provide you with reliable after-sales service. If you are unhappy with our product fro any reason or have any questions, please feel free to contac....
Check Stock

Glarks 120Pcs 10 Size Mini Fuel Injection Style Hose Clamp Assortment Kit For Diesel Petrol Pipe

  • ☆【Wide Hose Clamp Size:】 In this set, we provide 10 size of hose clamps which are 15pcs 7-9mm, 15pcs 8-10mm, 15pcs 9-11mm, 15pcs 10-12mm, 10pcs 11-13mm, 10pcs 12-14mm, 10pcs 13-15mm, 10pcs 14-16mm, 10pcs 15-17mm, 10pcs 16-18mm total 120pcs packed in a plastic box, easy to storage and carry..
  • ☆【Durable Quality:】 All the hose clamps are made of carbon steel, with zinc plated on the surface, corrosion and acid resistant, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • ☆【Adjustable Style:】 All the hose clamps with screws, you can adjust the size according to the diameter of the pipe, so you can install and remove them at any time with a socket wrench. The range of clamps represents the minimum and maximum sizes they can be adjusted..
  • ☆【Save Time and Money:】These mini fuel injection line style hose clamps are edge polished smooth to avoid damage to the hose, excellent for sealing hoses against loss of liquid, saving your time and money on costly repairs the pipe..
  • ☆【Function and Use:】These clamps are locking secure and tight, widely used in automotive, agriculture, aviation, material handling, marine, plant & construction..
Check Stock

Cole-Parmer Acetal Copolymer Hose Clamps, White, 0.702\ x 0.801\

  • Package includes 3 different sizes spring clips:10mm,11mm,15mm..
  • Made of high quality spring plastic,anti-corrosion and durable for long time use..
  • 360 degree inner ring precision design,prevent damage to the pipeline effectively.The handle design with raised points increases friction and makes it more labor-saving and comfortable to use..
  • Widely used for hose air hose,water pipe,automotive fuel line,silicone hose,etc..
  • Scope of application:automobile industry,automobile parts industry,agriculture,sanitary ware, medical treatment,plastic industry,mechanical oil road,pipe joint,etc..
Check Stock

Five Oceans FO4277 Brass Fuel Hose Barb 1/4 inches NPT Thread x 3/8 inches Hose, Crafted for Fuel Systems, Sharp-Edged Barbs, For Any Portable Tank

  • This Five Oceans Fuel line connector can be installed with confidence using our pipe-to-hose fittings..
  • Perfectly crafted for fuel systems, these pipe hose fittings are the ideal use for any portable tank..
  • This machined brass fitting features a male 1/4 inches NPT thread and sharp-edged barbs for 3/8 inches hose to provide excellent grip. Brass construction resists corrosion..
  • Barbs provide excellent gripping power for fuel line connections.
  • We recommend the use of fuel compatible thread sealant to prevent galling and provide the best possible connection.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

RIDGID 19238 NaviTrack Scout Locator, Underground Pipe Locator and Underground Cable Location Device & 16728 Remote Transmitter (512 Hertz Sonde) for Underground Pipe Location,Red/Black,Small

  • Product 1: Multi-directional antenna technology sees the entire signal all of the time - maximize the signal strength to find the target pipe, sonde, or energized line.
  • Product 1: Underground pipe locator verifies position using a micro-mapping display to mark distinctive poles in front of and behind the target, ensuring an accurate locate.
  • Product 1: When using as underground cable locator or pipe locator, the Navitrack Scout automatically calculates and displays depth when oriented over the target..
  • Product 1: Meets FCC Class B and EN 55022 Class B - operates in these standard frequencies: Sonde - 16 Hz, 512 Hz, 640 Hz, 874 Hz and 33 kHz.
  • Line Trace - 128 Hz, 1 kHz, 8 kHz and 33 kHz.
  • Product 2: Attach remote transmitter to drain cleaning cable or a water jet hose to locate pipe underground.
  • Product 2: Flashing LED to indicate that sonde is transmitting and ready to operate as a beacon during underground pipe location.
  • Product 2: Meets FCC Class B and EN 55022 Class B requirements.
  • Product 2: Adapters (catalog # 19263, 19268, 19273, and 19258) attach transmitter to drum machine or sectional cables provide versatility in locating underground pipe and line detection.
Check Stock

Fuel Line Plier Petrol Clip Pipe Plier Hose Pipe Disconnect Release Removal Pliers Clamps Tool

  • 【Size】:The total length approx:9”/220mm, handle length approx:4”/100mm, Maximum opening approx:2.4”/60mm. Heavy duty design, 8mm....
  • 【High quality material】:This fuel pipe plier is made of high-quality steel material, which is durable and sturdy. It is not easily damaged, has....
  • 【Useing】:Suitable for installation of automotive water pipes and removal of spring bundle. Like fuel line, gasoline pipe, urea pipe, oil pipe..
  • 【Scope of application】:The fuel hose plier has high practicality, which is a practical tool for disassembling and replacing the connections on....
  • 【Design features】:The fuel line clip release plier designed according to ergonomics principle, which is labor saving and comfortable to use.Use....
Check Stock

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • NexADD 4Pcs Fuel Line Pliers Set Does It All★- Eliminate the problems associated with removing fuel line connectors or undo fuel lines.This set includes 4 Pcs fuel line hose pliers,a hose remover pliers, a 9'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum openin....
Check Stock

Expandable Garden Hose 100ft with 10 Function Nozzle, VEVICE Lightweight & No-Kink Flexible Water Hose with Durable 3750D Fabric, 3/4\ Solid Fittings, Storage Bag, Waterhose Holder for Outside Home

  • 【Premium Retractable Hose】Made from 3750D high-strength polyester yarn and natural 3 layer latex inner tube (Never Kink/Twist/Tangle), which can expand to 3x length(from 32ft to 100 ft). Compared with the PVC spiral fabric water pipe in the market, it is softer, lighter and more convenient to use, EVEN children..
  • 【10 Levels Water Pipe Sprayer】Including mist, angle, soak, spray, cone, shower, flat, full, centre and vertical. The water source can be controlled more safely and efficiently with quick connectors and on / off valves. The shape design is in line with ergonomic design. Lightweight, durable, easy to use and not easy to get tired of..
  • 【Multiple Leak-proof Design】We have made multiple anti-leakage designs(waterproof and rust-proof perforator) at the water pipe joints at both ends, and made multiple gaskets in the joints to prevent water from overflowing..
  • 【Wide Applications & Enjoy Watering】VEVICE's water hose is suitable for cleaning house/yard/lawn/outdoor, garden watering, cleaning pets/car and more. With our hose set, you will enjoy watering, watering is a life too!.
  • 【7 In 1 Hose Package】You get a durable bag + expanding hose+ 10 functional nozzle + 3 replaceable rubber + 1 seal ring water tape + hose clamp + product ma....
Check Stock

Brass 1/4 Barb X 1/4 NPT Male End Air Hose Pipe Fitting Threaded Connector Adapter Pack of 12

  • ✅ Function -- Barb head for connecting hoses, NPT end used to connect NPT pipes. Air hose pipe can apply to water, gas, oil and fuel as well as air tools..
  • ✅ Premium material -- Brass barbed hose fitting is made of high quality solid brass, firm and durable, providing high resistance to abrasion and corrosion. Solid brass hose barb can withstand up to 100 °C (212 °F)..
  • ✅ Durable -- Air hose fittings is not a cast product and has a thick wall, providing a longer service life than iron and iron galvanized pipe fittings..
  • ✅ Superior threads -- Deeper and smoother threads with barbed edges provide effective connection..
  • ✅ CUSTOMER SERVICE -- Professional factories produce brass air line fittings. Every detail reflects a strong texture performance. Fast Delivery and 30 Days Free Refund..
Check Stock