ReviewsHose Shank Quick Disconnect

FERRODAY Stainless Steel Quick Disconnect Set 1/2 NPT Female Disconnect 1/2 Barb Brewing Quick Disconnect For Wort Pumps for Wort Chiller Connectors for Ball Valve Hose Fitting & O-rings

【304 Stainless Steel 】 The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade....
【Quickly Switch Lines Between Equipment】 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting（ball valve, wort chillers,....
【Push-On Hose Fittings 】Firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick....
【No Leaks】The barbed quick disconnect has a red silicone gasket inside. It will create a tight seal for liquid & gas between FPT fitting and the....
【Connection Easily】This quick disconnect set allows one hand operation of take on/ take off. All parts fit together very well . The FPT quick....

Check Stock

SHINESTAR 1/2-Inch Natural Gas Hose (24-Feet) with Quick Connect Fitting, Propane to Natural Gas Conversion Kit, Perfect for BBQ, Grill, Pizza Oven, Patio Heater and More NG Appliance

[ Works Perfectly ] With a 3/8" female x 1/2" male adapter, you can use natural gas to supply propane gas appliance. Perfect for grill, patio heater, pizza oven, and more..
[ Perfect for ] The hose works for Blackstone, Weber, Charbroil Grill, and more NG appliances.
[ Enough Flow ] 1/2-inch inside diameter hose, provide adequate gas flow for grills and other gas appliance..
[ Easy to Install ] With quick-disconnect brass fittings on both ends make it easy to attach and remove this gas hose as needed..
[ Package ] Includes 24ft 1/2″ ID hose (1/2" male quick disconnect plug X 1/2" female flare), 1/2" quick connect/release fitting, 3/8" female x 1/2" male fitting..

Check Stock

PERA Ball Lock Quick Disconnect Set Ball Lock Beer Quick Disconnect 1/4 MFL with 3/16 Swivel Nuts Hose Clamps for Beer Homebrew 4PCS

Include: Ball Lock Liquid Disconnect MFL,1/4 Swivel Nut (4 PACK), Hose clamps*4.
Material: PBT Material for Ball Lock Quick Disconnect and Stainless Steel Material for Swivel Nut.
Use: The Black Liquid Keg Coupler is for most Cornelius Keg, Pepsi Keg, and 7-UP tanks.
Connect:The Ball Lock Disconnect Barb Type fit 1/4" inside Diameter Beer Hose.
Guarantee: Quality Guarantee, any problem for Ball Lock Liquid Disconnect, Money Back or Replacement free..

Check Stock

M MINGLE Ultimate Pressure Washer Adapter Set, Quick Disconnect Kit, M22 Swivel to 3/8 Inch Quick Connect, 3/4 Inch to Quick Release, 8-Pack

ATTENTION: M22 14 mm swivel fitting has 14 mm inside diameter, NOT 15mm. NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz. If washer needs 15 mm, may cause leakage..
8-pack universal Pressure Washer Adapter Set, 4 kinds of couplers includes: Metric M22-14 swivel female + 3/8’’ plug, 3/8’’ quick disconnect + M22 male, 3/4’’ female + 1/2’’ quick connect, 1/2’’ plug+ 3/4’’ male..
Two Quick Connector Sets connect water outlet of pump to pressure washer hose or connect pressure washer hose to gun. The other two Quick Connect Kits converts 3/4’’ threads to quick release fittings, connecting all 3/4" standard garden hose to water inlet of power washer pump..
High replacement couplers provide secure and quick fittings, easy to connect and disconnect. Max. Pressure is up to 5000 PSI..
M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..

Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type A included, Heavy Duty Reinforced Pump Backwash Hose Assembly

...d extra TYPE A adapter. Length: 50 feet.
Temperature Range: 23°F to 149°F (-5°C to 65°C).
[TYPE A FITTINGS]: The item include a type A (male adapter x female NPT threaded ) cam and groove hose fitting, you can directly screw onto pump male threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
[NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
[WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
widely used in household, mine, factory, agriculture, and architectural engineering.
This drain hose can adapt to most outdoor conditions and all seasons..
[EASILY USE]: It can be easily connected, after Type A is connected to the pump, just slide type A male adapter into type C female coupler, press the brass cam levers down with normal hand pressure or spanner, remain locked when engaged to help prevent disconnects..
[GOOD SERVICE]: Our aim is to provide....

Check Stock

2' x 50ft PVC Lay Flat Discharge Hose With Aluminum Camlock C & E Fittings, Cam Lock Fitting Type F included, Heavy Duty Reinforced Pump Backwash Hose Assembly

...d extra TYPE F adapter. Length: 50 feet.
Temperature Range: 23°F to 149°F (-5°C to 65°C).
[TYPE F FITTINGS]: The item include a type F (male adapter x male NPT threaded ) cam and groove hose fitting, you can directly screw onto pump female threaded outlet, then realize quick connect or disconnect between discharge hose assembly with pump..
[NO LEAK]: Pool Backwash hose doesn’t leak or burst within 90 psi working pressure. Because the delivery hose body adopts fine double-sided coating and fiber reinforcement. The camlock coupling shank is special multi-section structure and added black rubber ring and sealant at the connection..
[WIDELY USED]: Ideal for draining swimming pools, backwash pool filter, sewage pump, sump pump, trash pump, pool drain and sand filter pumps etc.
widely used in household, mine, factory, agriculture, and architectural engineering.
This drain hose can adapt to most outdoor conditions and all seasons..
[EASILY USE]: It can be easily connected, after Type F is connected to the pump, just slide type F male adapter into type C female coupler, press the brass cam levers down with normal hand pressure or spanner, remain locked when engaged to help prevent disconnects..
[GOOD SERVICE]: Our aim is to provide....

Check Stock

HQMPC Garden Hose Quick Connect Brass Hose Quick Connectors Water Hose Connector 3/4' GTH (3 Female Coupler+ 6 Male Nipples)

★【Garden Hose Quick Connect Set】-Garden hose quick connector includes:3 female brass connector + 6 male brass connectors to build up quick switching system..
★【Durable and Solid Water Hose Quick Connect】-durability & leak-free. No cheap and flimsy aluminum or plastic material.Standard 3/4 inch GHT water hose quick connector fits all types of garden hoses. working perfectly with any 3/4" GHT(garden hose thread) spigot, hose end and nozzle..
★【Great Time And Effort Saver Water Hose Connect】-Garden Hose Quick Connectors, easy to install on 3/4" standard spigot, hosed end and nozzle. Quick switching for different nozzles, sprinklers, and watering equipments. No need to screw and un-screw everytime. No flow stopper, no water pressure reducing..
★【Stand To 200 PSI】-gives the Easy Connect Fitting continuous water flow and it’s a great tool to complete your garden accessories and water hose connect.Easy to connect and disconnect. Quick release allows for easy removal of hose..
★【Water Hose Easy Connect】The best quick connectors for garden hose, we provide 3 years gurantee. Just order them with your prime. If you have any slightest problem with these products,we will 100% refund to you or replace a new set for you.

Check Stock

10 Pieces Airbrush Adapter Set Includes Airbrush Adapter Kit Airbrush Quick Release Disconnect Fitting Connector Female Couplings Nylon Braided Airbrush Hose for Air Compressor and Airbrush Hose

What you receive: there are 10 pieces in this airbrush adapter set, including 7 pieces 1/8 inch and 1/4 inch BSP male and female couplings in different types, 1 piece airbrush quick disconnect coupler, 1 piece 1/8 inch BSP male fitting and 1 piece 6 ft nylon braided airbrush hose for connecting to airbrush end, abundant content and sufficient quantity meet your airbrush hose use.
Sturdy structure: our airbrush adapter kits are made of quality metal material, which endows these accessories with sturdy and strong structure, makes them not easy to break or deform, anti-corrosion and anti-rust, durable to provide you long term application.
Simple to assemble: the quick release airbrush fittings are easy to connect and disconnect airbrush without screw trouble, with smooth threads which are convenient for you to assemble in several seconds, saving you much effort and time.
Compatible with: the airbrush quick disconnect set is compatible with most Master, Pointzero, Iwata, Hansa, Sparmax, Grex airbrush and most China airbrush, able to satisfy your multiple replacing needs and practical to use.

Check Stock

None branded Paintball Coil Remote Hose Line w/Quick Disconnect & 3000psi Pressure Gauge

Paintball PCP Coil Remote Hose Line w/Quick Disconnect.
Heavy Duty Remote Hose/Line With Quick Disconnect that get bulky tank off your paintball gun with a coil remote!.
Unlike braided stainless steel hoses, the coil will expand and contract to fit the position you're in.
Rated for 3000 psi use, so you can be sure you won't have any blown ends, It will work with ANY screw-in CO2 or compressed air / N2 tank!.
Now with more flexible coil-Reduced number of coils reduces catching on vests and packs-Field tested with great results..

Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..

Check Stock

Brazing and Soldering Kit

Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for B acetylene cylinders.

Check Stock