ReviewsHot Oil Gear Pump

LYCARESUN 15 to 55 Gallon Drum Pump, Aluminum Barrel Pump Hand Liquid Transfer, Hand Siphon Barrel Pump, Hand Drum Pump for Gasoline Oil Fuel Diesel, Kerosene, Hydraulic Fluid

  • Adjustable Drum Pump: It consists of 3 segmented suction tubes, the total height of the pump is 51 inch, easy to adjust the length of suction tube according to your need. The outlet pipe can be adjusted to fit 15 to 55 gallon drums..
  • Quality Assurance: Our roller pump is made of high-quality aluminum materials, with high anti-corrosion and rust prevention capabilities, and is durable. Each set has been tested before reaching the sales standard..
  • Filter: Each drum pump set is equipped with a filter. Just install it at the bottom of the oil suction pipe to effectively purify the oil and filter out impurities..
  • Good Sealing Performance: The oil suction pipe is threaded, not easy to wear, with high hardness, good connection performance, strong sealing, and effective prevention of oil leakage..
  • Scope of Application: Liquids that cannot be extracted: acid-base liquids, corrosive liquids, gasoline, water, urea, chemical solutions, edible liquids, etc. Extractable liquids: engine oil, hydraulic oil, gear oil, diesel oil, kerosene, edible oil (but not edible grade)..
Check Stock

SMOTIVEPRO Engine Oil Extractor Pump Brake Fluid Extraction Syringe Vacuum Filling and Extracting Pump Capacity 500CC

  • SUPERIOR MATERIALS:The Syringe oil extractor pump made of high quality, solid, durable material, Built-in dual rubber pads, fit the piston closely to avoids leakage,Thicken wall enhances high strength and provides long service life..
  • Extra tubes and Different Capacity for Choice: Extra tubes make extra length for jobs in hard to reach places and won't have to worry about spillage during use. Different Size Brake fluid extractors provide best Choice on the Capacity:0.5Liter/1.5Liter.
  • Extraction and Infusion of Liquid: Simple syringe-type action using the manual fluid pump can dual-way extract and fill fluid by differential extractor dispenser quickly and easily. Ideal for emptying or filling up the master tank and other reservoirs, extracting brake fluid from the tank and adding new oil before flushing the brake fluid to the brake caliper..
  • Widely Application: Ideal for extracting or changing engine oils or lubricants in ATV's, boats, farm equipment, industrial gear boxes, motor vehicles, motor bikes, RV's, etc. Applicable to engine oil, gear oil, gearbox oil, including chemical resistant oils,brake fluid, diesel fuel, coolants, hydraulic systems and water, etc..
Check Stock

Happybuy 10152 PSI Hydraulic Electric Pump 750W Double Acting Hydraulic Driven Pump 110V 7L Solenoid Pedal Hydraulic Power Pack Cylinder Hydraulic Pump

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.6L/min - 5L/min..
  • Large Capacity Tank: With a hydraulic pump tank, 7L capacity, the hydraulic power pack is efficient. A visible window for monitoring the inside. The pump uses the 15 - 46 anti-wear hydraulic oil. It features compact size, lightweight, simple structure, and ease of use..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 7Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this double-acting hydraulic gear pump by the solenoid valve. The high-pressure oil pipe is of high quality and durability. Control two with double pipes..
  • Various Application: The manual hydraulic pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
Check Stock

Mxmoonant 12V Oil Transfer Pump, 3.2GPM Self Priming Oil Change Extractor Pump, Fuel Transfer Pump with Hoses for Diesel Kerosene Marine Boat Truck

  • [STRONG SUCTION & LOW NOISE] This electric gear oil pump has a self-priming range of up to 3m/10ft, and the max flow is up to 3.2GPM/12LPM. When the machine is working normally, the sound is around 55-60db. In addition, it is also equipped with shock-proof rubber mounting feet, which can greatly reduce the working noise..
  • [HOSE INSTALL] This fuel transfer pump is small in size and easy to carry, making it convenient to install in various directions in a limited space. The port diameter is 3/8’’ (10mm), which can meet most of the hoses on the market. Of course, if you don’t have the right accessories for a while, we also include a one-meter black oil hose and two fixing clips, which can help you transport in time and bring you a better experience..
  • [TRANSFER & CHANGE] This oil change pump has a vacuum self-suction function, which is generally used in the liquid replacement and transfer of large trucks, engineering vehicles, harvesters and small refueling equipment, including diesel, engine oil, lubricating oil, kerosene and other high-viscosity oily liquids.【Tip】Except gasoline petroleum fuel..
  • [OVERHEAT PROTECTION] This oil transfer pump has a built-in overheating protector. And if there is an abnormality such as overheating and overload,....
Check Stock

Happybuy Hydraulic Pump Electric Double Acting Manual Valve Hydraulic Pump 10000 PSI Electric Hydraulic Power Unit for Home and Commercial Using (Double Acting)

  • ...e Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the hydraulic pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this double-acting hydraulic gear pump by a lever which has a rubber cap in one end for a comfortable grasp and use. Control two equipment at the same time, pretty efficient. The oil pipe coupling is fitted with a PT3/8” thread..
  • Various Application: The manual hydraulic pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
Check Stock

VEVOR Hydraulic Power Unit 12 Volt Dump Trailer Hydraulic Pump Double Acting 6 Quart Hydraulic Pump Electric Hydraulic Pump with Brass Pressure Gauge for Dump Trailer Lift Gates & Trucker

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 7Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min..
  • Large Capacity Tank: With a large fuel tank capacity, 7L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The pump uses the 15 - 46 anti-wear hydraulic oil. It features compact size, lightweight, simple structure, and ease of use..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 7Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this single acting hydraulic gear pump by a solenoid valve. The high-pressure oil pipe is of high quality and durability..
  • Various Application: The manual hydraulic pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending, straightening, cutting, assembly, and disassembly. Reduce manual work and maximize work efficiency..
Check Stock

OEMTOOLS 24937 1.5 Gallon 6 Liter Pneumatic and Manual Fluid Extractor Manual and Pneumatic Oil Extractor Fluid Vacuum Extractor Vacuum Evacuator

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid....
  • Double Duty: For pneumatic extraction, insert the suction hose in the engine oil extractor receiving hole.
  • Manually suction fluid with the engine oil....
  • Don’t Cry Over Spilled Oil: The 1.5 gallon reservoir is a solid one-piece tank that can't leak out the bottom.
  • Time Flies: Draining oil from beneath a vehicle takes eons.
  • The oil pump extractor's 5 foot hose and dipstick adapter extracts automotive fluid....
  • Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
  • This fluid extractor pump works at 85 PSI and a max....
Check Stock

Mplus M176 Oil Pump Kit Replace for 1991-2008 for Ford, for Lincoln, for Mercury 4.6L 5.4L 6.8L V8 SOHC 16V 21mm Inlet Only for Windsor, Romeo Engine

  • Car Fitment-1992-2008 for Ford Crown Victoria / 1996-2004 for Ford Mustang GT / 1997-2004 for Ford Expedition / 1997-2008 for Ford F Series Trucks / 1997-2004 for Ford F 150 Trucks / 1997-2008 Ford E Series Vans and more, please confirm this item fits for your vehicle before purchasing (Check Fitment Data Above or see description below).
  • OE Part Number-F5A2-6600B, 5L3Z-6600-A, 5L3Z-6600-AA. Mplus Oil Pump are certified to ISO/TS16949:2009 and ISO14001..
  • High Performance-Our Aluminum die cast technology allows for size and weight reduction.Lubricates critical components to maximize the life of the engine. Mplus Oil Pump aims to deliver ideal oil pressure to the engine without creating excess load..
  • Installation Tips - Most oil pump sits right at the front of the engine and is driven by a gear on the crankshaft. You need to remove the oil pan firstly and then replace the bad oil pump from underneath. You could also ask help for a professional mechanic..
  • Buy with Confidence- Our local US-based team and inventory offer 24-hours professional after-service and fast shipping. We also offers 2 years or 40000 miles warranty, please buy with confidence..
Check Stock

2400-2800PSI Pressure Washer Replacement Pump, 3/4\ Shaft Horizontal Pressure Pump Replacement Power Washer Pump Universal Pumps for Power Washer

  • ...aning solution. Please follow the instructions to help your machine renew working quickly..
  • ✔[NO MAINTENANCE ]: Our pressure washer pump already have pre-filled oil and double seal system, set it up directly and prevents oil/water leaks. This pump features a maintenance-free crankcase so you never have to pre-fill gear oil and no need to change oil. The improved 2.5GPM, 3000PSI performance allows you to clean rooftops, sidewalks, cars, gardens, pools etc..
  • ✔[COMPATIBILITY]: Replacement for►Homelite: 308653052, 308653006, 308653093, 308653078, 308653008, 308653036, 308653035, 308653026, 308653058. ►Ryobi: RY802900, RY802800, RY802723, RY8C2700, RY802700A. ►PowerStroke: PS80946, PS80931. ►Husky: HU80709, HU80911, HU80709A, HU80911A. ►Craftsman: 580.752960, 580.752052, 580.752191, 580.752880. ►Simpson: ms60773, msv3024..
Check Stock

4HP Outboard Motor Boat Engine, 4 Stroke Heavy Duty Outboard Motor Fishing Boat Engine with Water Cooling System (4-Stroke 4HP)

  • ... engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport!.
  • ②DETAILS: Model: 4.0 horsepower jet pump.
  • Refueling method: No. 92 unleaded gasoline is recommended..
  • ③SIZE INFORS: Packing volume: 95*42*29cm/37.4*16.5*11.4inch.
  • Gross weight/net weight: 13(28.66lb)/9.7kg(21.3lb).
  • Recommended engine oil: four-stroke engine oil.
  • ④ATTENTION:Use four-stroke special engine oil (automobile and motorcycle engine oil).
  • Add oil according to the scale indication on the oil dipstick (the rotating cover),do not add more or less.
  • The fuel tank of the four-stroke outboard engine can only be filled with No.92 pure gasoline.
  • Gently press the oiler on the carburetor until the oil flows to the top of the transparent oil pipe..
  • ⑤WIDE APPLICATION: It can be marche....
Check Stock

CGOLDENWALL Upgraded Oil Press Machine Automatic Oil Presser Cold Hot Press with Intelligent Control Panel/ LCD Touch Screen/ 6 Kinds of Temperatures Optional/ Food Grade Stainless Steel/ Built-in Thrust Bearing, Oil Extractor for Commercial Home Use

  • 5.25 INCHES INTELLIGENT CONTROL PANEL & LCD TOUCH SCREEN -- In addition to adjusting the automatic/manual mode and pressing temperature, the LCD screen also clearly displays the working status, heating time, temperature level and mode of the oil press..
  • 6-GEAR INTELLIGENT HEATER -- Our K28 oil press is equipped with a 6-Gear Intelligent Thermostat Heater. There are six operating temperatures available, namely Fire1/2/3/4/5/6 (140°/160°/180° /200°/220°/240°). You can choose the most suitable temperature according to different materials..
  • COLD&HOT PRESSING -- Our oil expeller supports two modes of oil pressing: cold and hot. Cold pressing better retains the nutritional value of the oil.
  • hot pressing can squeeze the oil more efficiently, and the oil will be pure and aromatic..
  • BUILT-IN THRUST BEARING -- The thrust bearing of our K28 oil presser is built into the motor, fundamentally rejecting the edible oil being contaminated by the engine oil and metal powder, and greatly increasing the service life..
  • WIDER PRESS RANGE & HIGHER OIL YIELD -- More than 24 kinds of mat....
Check Stock