ReviewsHot Rolled Seamless Pipes

Apeixoto 2.5 Inch Inlet Exhaust Tip 2.5″x4″x12″ Exhaust Tip Polished Stainless Steel with Bolt On Design Installation

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

TCMT 21" Front Wheel Rim Dual Disc Flange Wheel Hub Front Fender Fit For Harley Touring Non ABS Models Road King Electra Street Road Glide Ultra Limited 2008-2023

  • Turn heads with the classic hot rod sound produced by these Vance & Hines 2-Into-2 Exhaust Pipes.
  • Crafted using 16-gauge steel, these 2-1/2" diameter pipes are downward-curved with scalloped end tips, featuring full-coverage heat shields for blue-proof chrome and removable baffles.
  • Big Radius 2-Into-2 Chrome Exhaust Pipes produce more torque and horsepower than stock pipes, giving you the look, sound and performance Harley riders expect from Vance & Hines.
  • Vance & Hines Big Radius Chrome 2-Into-2 Pipes are made in the USA.
  • Vance & Hines does not ship metal exhaust port gaskets with the Big Radius Chrome 2-Into-2 Pipes. Metal exhaust gaskets may be purchased separately 4400281.
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • ...ht: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manual.
Check Stock

Thermwell Products 12\X15' Fbg Insulation Sp55 Pipe Insulation

  • Commercial grade high temperature self sealing fiberglass tube 1/2″ thick and 3 feet long with reinforced foil & paper wrap.
  • Used for pipes immediately exiting furnace and water heaters, where foam pipe insulation might not be appropriate.
  • If your ductwork and your hot water pipes are not properly insulated or not insulated at all, you could be wasting up to 40% of your monthly home energy bill.
  • Frost King’s pipe and duct insulation solutions not only save you money, they’ll make your air conditioning and hot water heater work quickly and efficiently.
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • ...ower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+cor....
Check Stock

Halero Pipe Wrap Insulation 1/5 Inch Thick Pipe Insulation High Density Waterproof Foam Tape with Self Adhesive Application for Hot or Cold Pipe 26FT Length× 6 Inch Width

  • 【Size】26'×6"×1/5" waterproof pipe insulation foam wrap tape.(length:8m,width:15cm,thickness:5mm).
  • 【High Density Foam】This duct insulation foam is made with high density closed cell PE foam material and a high quality aluminum foil backing,which has good insulation properties, and is resistant to cold, heat, oil, and moisture..
  • 【Strong Self Adhesive】Can firmly stick to the surface, not easy to fall off, can provide better sealing..
  • 【Easy to Cut】The pipe warmers material is easy to cut and install, and can be cut according to the length you need. Since the width is wider than the general insulating foam adhesive, it can be divided into two or more parts for use..
  • 【Excellent Thermal Insulation Effect】Our pipe insulation tape is very suitable for hot and cold pipes. It can lock the heat of the hot water pipes to avoid loss, and also help to prevent the cold water pipes from getting wet and prevent the floor from getting wet. At the same time, it also has a certain protective effect on the pipes..
Check Stock

Duck Brand Insulating Foam Pipe Covers, 0.75-Inch by 3-Feet, Pack of 4 Sticks, 1285241

  • Duck Brand insulating foam pipe sticks are great for insulating both hot and cold pipes.
  • Prevents winter freezing and summer sweating.
  • Safe for temperatures up to 212-Degree-Fahrenheit.
  • Versatile sticks are pre-slit for easy opening and installation on curved pipes and the self sealing edges make it easy to secure.
  • 3-Feet sticks fit 3/4-Inch I.D. copper pipes and come four to a pack.
Check Stock

Apeixoto 2.0 2.25 2.5 Inch Adjustable Inlet Exhaust Tip 4 inch Outlet 9 Inch Long Polished Stainless Steel Exhaust Tip with Bolt On Design

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter within 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

Apeixoto 2.5 Inch Inlet Exhaust Tip 2.5″x4″x12″ Exhaust Tip Blue Burnt Chrome Plated Finish Stainless Steel with Bolt On Design

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel and end is bule burnt chrome plated. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny and fancy. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assist.
Check Stock

20 Pack Brass Pipe Screens 1/2 inch Metal Bowl Screen for Pipes

  • 【Pipe screens Material】Brass pipe screens are made of premium brass. it’s durable to use. The bowl screens edge are thickness and smooth, which could be easily to install in pipes..
  • 【Pipe screens 1/2 inch】Screen for pipes 1/2 inch- Inner diameter 0.5 inch, Outer diameter: 0.63 inch. They can fit most pipes. The pipe screen filters are good gift choice for your family and friends..
  • 【Perfectly in shape】Our pipe filters are perfectly cutting and round edges. The brass ring around the top to maintain bowl shape, right into your pipe..
  • 【Function】Pipe screen prevent clogging and stop hot ash or embers from entering the pipe. Also allow the fresh air flow freely and evenly burning.
  • 【Quality guarantee】The pipe screens are sturdy and saving your time for cleaning pipes. If any questions please contact us freely, we will response you within 24hr..
Check Stock

Borla 140591 ATAK Cat-Back Exhaust System

  • Borla 140591 ATAK Cat-Back Exhaust System.
  • Incl. Connecting Pipes/Mufflers/Hardware.
Check Stock