ReviewsHot Stabilizer

Diablo D0842CF 8-inch Steel Demon 42T Cermet II Carbide Ferrous Metal Saw Blade

• Very durable 8 in. 42-teeth saw blade used for cutting metals (steel studs, angle iron, flat bar, channel, EMT conduit, all-thread). Max RPM of 9000..
• Cermet and carbide blend teeth cut metals.
• lasts 3x longer than a standard carbide blade.
• Laser-cut stabilizer vents trap noise and vibration.
• Triple chip metal cutting grind provides durability and burr-free cuts.
• Spark free blades are "hot work" compliant (may not need to obtain a hot work permit on jobsites depending on local laws).

World Weidner™ Wash Away Water Soluble Embroidery Stabilizer & Topping 8 X 20 Yard Roll

Cobra Archery Double Joint Stabilizer Quick Disconnect

• Stabilizer quick disconnect is supper handy for removing stabilizers so they can travel in bow cases, etc..
• To use Cobra's Double Joint as a disconnect, simply turn the stabilizer 1-1/2 turns, then slide the connector and stabilizer out..
• As a jacknife knuckle, turn the stabilizer 1-1/2 turns, then swivel the stabilizer 90 degrees and tighten..
• Connector housing comes with brass connector and bolt..

New brothread No Show Mesh Machine Embroidery Stabilizer Backing 15" x 25 Yd roll - Light Weight 1.8 oz - Cut into Variable Sizes for Machine Embroidery and Hand Sewing

• ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. (similar to Sulky Soft'n'Sheer, Weblon, OESD Polymesh).
• ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits in light colored. It eliminates the bulk, stiffness and shadowing characteristic of other types permanent stabilizers. It is perfect for chest logos, pique knits, Polo shirts, T Shirts, infant items, micro fiber apparel, silk and satin..
• ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the fabric, then hoop and stitch together. One layer can be strong enough to produce best “no show” results..
• ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weig....

New brothread No Show Mesh Machine Embroidery Stabilizer Backing 12" x 50 Yd roll - Light Weight 1.8 oz - Cut into Variable Sizes for Machine Embroidery and Hand Sewing

• ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. (similar to Sulky Soft'n'Sheer, Weblon, OESD Polymesh).
• ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits in light colored. It eliminates the bulk, stiffness and shadowing characteristic of other types permanent stabilizers. It is perfect for chest logos, pique knits, Polo shirts, T Shirts, infant items, micro fiber apparel, silk and satin..
• ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the fabric, then hoop and stitch together. One layer can be strong enough to produce best “no show” results..
• ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weig....

Superpunch Wash-Away Water Soluble Stabilizer for Embroidery - 9 inch x 10 Yard Roll, Fabric Stabilizer, Embroidery Backing & Cut Away Stabilizers - SuperStable Machine & Hand Sewing - Made in USA

• MADE IN USA WASH AWAY STABILIZER: This USA-origin cut-away embroidery stabilizer dissolves completely when immersed in cold or warm water. Our water-soluble embroidery topping is made in the USA & a great choice for topping. This American-made product is best used on washable fabric and high-pile fabric such as terry cloth, towels, fleece, and other fluffy materials that require the complete removal of the stabilizer..
• FABRIC STABILIZER SPECS: The thickness of this embroidery paper dissolve is 20 microns & the size is 9 inches wide & 10 yards per roll. (a minimum of 9 inches wide/ you may even receive up to 9.75"). Ideal to leave your stitches on top of your garment. No, itching worries even if you used our wash-away topping stabilizer on your skin touch. It can also be used on top of a high-profile fabric to hold down its nap, or pile. Very popular on towels and polar, sweaters, fleece & other soft knits..
• EASY TO USE: Hoop the wash-away (water soluble) embroidery stabilizer together with fabric, then stitch. After finishing your project, just spray the embroidery design with water, and the water-soluble stabilizer will disappear leaving nothin....

New brothread Fusible Iron on No Show Mesh Machine Embroidery Stabilizer Backing 12" x 25 Yd roll - Light Weight 1.8 oz - 3 Options - Tear Away/Cut Away/No Show Mesh

• ▶NOT ONLY CUTAWAY STABILIZER: This is no show mesh cutaway stabilizer which provides permanent support for embroidery projects. Unlike traditional cutaway stabilizer, our no show mesh stabilizer eliminates the backing showing through light colored fabrics because of its semitransparent, soft and sheer texture. (similar to Sulky Soft'n'Sheer, Weblon, OESD Polymesh).
• ▶BEST USED ON LIGHT COLORED FABRICS: Our no show mesh stabilizer is semitransparent, it eliminates show-through, so it's best used on stretchy knits in light colored. It eliminates the bulk, stiffness and shadowing characteristic of other types permanent stabilizers. It is perfect for chest logos, pique knits, Polo shirts, T Shirts, infant items, micro fiber apparel, silk and satin..
• ▶HOW TO USE: It is Light Weight no show mesh stabilizer. For the embroidery designs with light stitches, just put one layer stabilizer under the fabric, then hoop and stitch together. One layer can be strong enough to produce best “no show” results..
• ▶TIPS FOR DENSER STITCH DESIGNS: For heavy stitches, denser designs or thicker fabrics, you can put one layer of light weig....

4 Hot Tub Cover Wind Strap Kit Secure Nexus Spa Lock Hurricane

• ...water-resistant coating, both of them have strong hydrophobicity, extremely water-resistant. The cover will protect your hot tub from water, rain, snow, dust, etc..
• 【SERVES X 2 TIMES LONGER】Made of 600D oxford fabric, super heavy duty, the hot tub cover is tough, tear-resistant, the surface is added with UV stabilizer, All-weather Protection, it can protect the hot tub against all harsh weather, and the cover will not crack, soaked although exposed to the harsh weather for a long time. It has a 2 times serving life than other SPA cover, durable for years use..
• 【Multiple Windproof】The adjustable drawstring makes the cover fit your outdoor hot tub more more perfectly. Durable wind secure belt can tighten the cover, which will futher prevent the cover from being blown away by a strong wind..
• 【Professinal Design】Designed with the air-vent that can reduce the water condensation inside the cover, the reinforced padded handle can help install or remove the cover easily. If do not need the hottub cover, you can fold it and storage it into the oxford storage bag (included in the packaging).

Diablo D1472CF 14-inch Steel Demon 72T Cermet II Carbide Ferrous Metal Saw Blade

• Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
• Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
• Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
• Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
• Spark free Cold Cutting blades are "Hot work" compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).

Diablo D0842CF 8-inch Steel Demon 42T Cermet II Carbide Ferrous Metal Saw Blade

• Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide..
• Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications..
• Triple Chip Metal Cutting Grind designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
• Tri-Metal Shock Resistant Brazing a three metal brazing system allows metal cutting carbide tips to withstand extreme impact for maximum durability.
• Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for jobsites (Check local laws).

Fox Men's Motion Elite 2-m, Red/Black/White, 7 M US

• Hybrid Sock construction for a virtually seamless fit.
• Stichless hot melt toe cap for durability and reduced weight.
• PU midfoot stability cage and heel stabilizer.
• Fox Motion Technology provides superior cushion, comfort, and flexibility in a lightweight package.
• Non-marking Duratrak MDT outsole for excellent grip and durability.