ReviewsHot Tip Nozzles

Tool Daily Pressure Washer Nozzle Tips Multiple Degrees, 1/4 inch, 5-Pack (Orifice 3.5)

ATTENTION: Please see Image 2 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 3.5. The working pressure is up to 4000 PSI..
Different angle allows you to clean hard-to-reach areas quickly and easily.
Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
Don’t use a ladder to clean or sprinkle water for tree with these nozzles..
More Application: Can be attached to a Quick-Connect Wand for swifter application and more.

Check Stock

Tool Daily Pressure Washer Spray Nozzle Tips Multiple Degrees, 1/4 inch 5-Pack (2.5 GPM)

ATTENTION: Please see Image 6 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 2.5. Different angle allows you to clean hard-to-reach areas quickly and easily.
Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
Don't use a ladder to clean or sprinkle water for tree with these nozzles.
More Application: Can be attached to a Quick-Connect Wand for swifter application and more.

Check Stock

BELAROKO SausageCaulkingGunTips and Cone Nozzles, 24 PCS

[ Perfect Tool ] Excellent replacement cone nozzles for sausage and bulk caulk guns, manual or battery sausage caulking guns, perfect caulking nozzle applicator finishing tool set that help you to caulk the gaps.
[ Universal ]These caulk nozzle are fit for most sausage caulk guns 20 oz. All these sausage caulking tips opening are easy to be enlarge by cutting the tip to size.
[ Enough Replacement ] 24 PCS caulk gun nozzles for sausage caulking gun. Includes 20 pcs white caulk nozzle tip designed for single use and should be discarded after each use, and there are also 4 pcs yellow cone nozzles for bulk caulking guns are environmentally friendly and economical which are made of durable thick plastic. You can reuse them many times after cleaning them.
[ Wide Application ] Caulking nozzle applicator for sausage caulking gun are widely applicable. The replacement caulk nozzle applicator can be used in baseboard caulking, doors and window sealing, bathroom caulk and plumbers caulk etc..

Check Stock

HYDRO MASTER 0179101 Universal Outdoor Misting System Calcium Inhibitor Filter (2 pcs)

[ Solid Brass Misting Nozzles and Plug ] The misting nozzles and the plug are mechanically carved from the brass rod. Each nozzle or plug contains a black gasket, good sealing..
[ 0.0197" Orifice (0.5 mm) Excellent Misting Effect ] The orifice of the misting nozzles and plugs is 0.5mm（0.0197"), so it will produce tiny and soft mist to make excellent cooling misting in hot summer. Diameter: 0.9cm(0.35"), Height: 1cm(0.39").
[ 10/24 UNC Standard Thread ] The thread of the nozzles and plugs is 10/24 UNC, and matches many kinds of tee connectors widely. Such as the 1/4" tee connector, 1/2" turn 1/4" tee connectors, standing misting nozzle connector and so on..
[ Product Included and Water Setting ] Product included: 10pcs mist nozzles and 2pcs mist plugs. Water Setting: 2-2.3GPH(us gal per hour), 0.2-0.6MPA. It's suggested to install less than 30pcs nozzles on one water line to make an excellent misting effect in common faucet/tap water pressure in the U.S..
[ Wide Range of Use in Hot Summer ] The nozzles are used in misting system to make cooling misting, the plugs are used to stop somewhere you don't want to mist some time. It's widely used to make outdoor cooling system, agriculture irrigation system, standing misting system, trampoline misting, de....

Check Stock

PEGGAS - 5 Piece Pressure Washer Nozzles - Premium Pressure Washer Nozzles - 1/4\ Quick Connect - Power Washer Attachments - Washer Tips - Spray Nozzle - Replacement For Most Pressure Washer Brands

5 ESSENTIAL NOZZLES - Spray Nozzle Tips Set Includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass Soap Nozzle Tip (65 Degree).
PRESSURE WASHER TIPS - 5 Better than OEM High Pressure Power Washer Nozzles, Perfect Replacement.
Highest Quality - Our Nozzle Tips Are Constructed From High Quality Stainless Steel And Brass.
1/4" QUICK CONNECT- Quick Release Fitting Makes It Very Easy To Switch Tips, Makes Jobs Much Faster!.
PRESSURE WASHERS RATED - 1/4 Inch Quick Connection Design: 2.9 GPM & Up To 4000 PSI..

Check Stock

19 Pieces Electric Hot Knife Cutter Tool, Multipurpose Hot Knife Stencil Cutter with Metal Stand, 14 Pieces Blades, 3 Pieces Chuck Sleeves for Cutting Carving Soft Thin Foam Making Stencils

...hot cutter handle, 1 piece metal stand, 3 pieces chuck sleeves, 14 carving blades.
Enough quantity and nice combination so that you can easily carve.
Durable to use: they come equipped with a mechanism of cooling system which prevents the handle from heating up despite the nozzles being heated up to 212 Fahrenheit degree/100 Celsius degree.
Built in air cooling device lasting heat dissipation.
Easy to use and precise cutting,they can improve work efficiency and prolong service life.
Metal stand: while removing the head to insert a new one, they will utilize the heat-safe metal stand to place the knife in order to cool it down as the nozzles may heat up very fast.
Wide application: electric hot cutter handle is always applied to carve faux pumpkins, rubber stamp sheets, foam, wax, plastic, cloth and foam core board.
Easily carve foam board and foam blocking from any angle and allows you to form your own shapes.
Warm tips: prior to actual usage, try the heated tip on a test foam to minimize the risk of burns.
Make sure to keep the kits out of reach....

Check Stock

5Pcs/Set Heat Gun Nozzles Kit, Stainless Steel Nozzles, for Hot Air Gun Heat Blower Nozzle Tool

HIGH QUALITY: The nozzles are made of high quality stainless steel, heat resistant and durable..
EASY TO USE: The heat resisting nozzles are more convenient to use, through expand the functions of your original hot air gun..
GOOD PERFORMANCE: The heat gun nozzle has fine workmanship, stable performance, long service life..
PACKAGE: The package includes 5 different size of heat gun nozzles for different use..
APPLICATION: The hot air gun nozzle is suitable for all kinds of hot air gun, the nozzle diameter is 35mm..

Check Stock

MMOBIEL YiHua 853D Soldering Iron Station Hot Air Gun 750 W 3 in 1 SMD Rework Solder soldering Station

...en the fan unexpectedly ceases, the device will be switched off for safety. Dimensions 29x20x18cm. Weight 3KG. Package Contains: 1x 853DA Main Unit. 1x 75 Watt Programmable Soldering iron 1x Soldering Iron Holder with Brass Tip Cleaner 1x Programmable Hot Air Gun 1x hot air gun holder 1x solder wick 4x Hot Air Nozzles 10x soldering tips 2x testing cable 1x English Manual.

Check Stock

Inflatable SUP Pump Adaptor Air Compressor Valve Converter, Multifunction SUP Valve Bike Pump Adapter w/ 4 Air Valve Nozzles for Inflatable Boat, Stand Up Paddle Board, Inflatable Bed

VAMO Strong! - Made from High density PVC and rust resistant Alloy for a strong seal that prevents air leakage when attached to a hand pump or electric pump. Perfect for inflating inflatable paddleboards (ISUPs), inflatable kayaks, inflatable canoes, air mattresses, inflatable pool toys and more..
Swappable Nozzles – VAMO’s air valve adaptor has 4 different nozzles. SUP pump adaptor utilizes a standard Schrader fitting to couple with an air compressor or bike/tire pump. Works with all major brands. Nozzles are nested in a strong resealable clear pouch for easy storage..
Fast inflation - Use your compressor or tire pump to easily reach the suggested PSI within 5-10min. HOT TIP: The larger the inflation pump the faster the inflation..
A WIDE RANGE of APPLICATIONS - Fits most paddleboards, canoes, rubber boats, assault boats, flushing pools, floating rows, inflatable beds, dinghy, kayak, etc..
100% VAMO Commitment - We are surfers, paddlers, boarders, hikers and enjoy the outdoors as often as we can. Because we know how bad equipment can diminish your experience stay confident we back 100% of our product with lifetime protection on manufacturing defects. There may come a time when using your VAMO gear on the last leg of its life that it is time to get a....

Check Stock

BACOENG 2 in 1 882D Soldering Iron Hot Air Rework Station with LED Display and ℉/℃ Conversion

【2 IN 1 Digital Soldering Iron Station】750W 2 IN 1 Soldering Iron Station is equipped with a soldering iron ( 392°F-896°F) and a heat gun ( 392°F-896°F).It supports the independents or simultaneous use of Hot Air Function and Soldering Function..
【Standby Mode】Putting the open heat gun back into the stand will automatically activate the standby mode. The hot air gun heats to your set temperature in a matter of seconds when you pick up the gun..
【°F Display】The LCD display shows the working temperature in real time, and the temperature can be switched quickly through a simple button. You can choose between Fahrenheit and Celsius to meet different usage habits..
【Overheating protection】The station can monitor and correct the actual temperatures at high speed with fast temperature compensation. Various parts of the machine have fail-detecting and auto-shutoff functions, over-heat sensor, short circuit, open circuit, overload failure have automatic protection..
【Package Includes】1 x Solder Station, 5 x Iron Tips, 4 x Hot Air Nozzles, 1 x Solder Sucker, 1 x Pair of ESD-Safe Tweezers, 1x Tube of Premium Solder, 1 x Tip Cleaner..

Check Stock

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).

Check Stock