ReviewsHot cement Machine

GIVIMO 5 CU FT Electric Cement Mixer Electric Concrete Mixer 2/3 HP 140L Construction Mortar Stone Cement Mixing Machine 30RPM Orange

  • 【Stable & Durable Structure】The electric cement mixer is constructed with a cast-iron drum and heavy-duty steel frame. There is a safety lock on....
  • 【Powerful Cement Mixer】The 2/3HP 120V/60Hz 3.5A concrete mixer machine is equipped with an electric direct-drive motor (550W), and the item is....
  • 【Large Capacity Drum】Compared with other similar household concrete mixers on the market, GIVIMO drum volume is up to 5 cubic feet, which is able....
  • 【User Friendly Design】Design with safety lock The tilt angle of the mixer can be adjusted according to the user’s preference easily and....
  • 【Easy to Operate】This heavy-duty cement mixer not only fit for concrete, stucco, and mortar and but also perfect for inoculating seeds and mixing....
Check Stock

Eco-Tuff Clearcoat Concrete Sealer and Wood Floor Sealer | Polyurethane Countertop Sealer 1 Gallon Matte

  • EXCELLENT SURFACE FINISH: The Eco-Tuff concrete sealer is formulated to provide a long-lasting, durable, and protective coating on concrete, wood,....
  • ABRASION RESISTANCE: Formulated with bio-polyurethane, the countertop sealer provides excellent surface resistance from scratch, hot tire pick up,....
  • EASY TO USE: This cement and wood sealer can be applied with mechanical airless or HVLP sprayers, trim pads, rollers or with a high-quality brush..
  • VERSATILE APPLICATIONS: Get a fine finish on concrete, masonry, wood, cement, and natural stone surfaces. It can also be used on cabinets, garage....
  • NON-TOXIC, SUSTAINABLE: The gloss finish sealer is virtually odorless, non-toxic and plant-based. It is an epoxy alternative, free of off gassing and....
Check Stock

MLLIQUEA 2100W Electric Handheld Concrete Mixer Drill, Portable Cement Mixer Stirrer with Rod for Mixing Grout Paint Mortar Mud Plaster, 6 Speed Adjustment 110V

  • ...ials. The use of S type thread makes the mixing effective and thorough, which greatly saves your time and prevents the mortar from splashing around. Comes with two carbon brushes to extend the service life of the concrete mixer..
  • Overheating Protection - Our concrete mixer machine has enlarged the air outlet, adopts porous heat dissipation design, faster heat dissipation, longer work time, longer service life. When the machine is overheated, the cement mixer will automatically cut off power to protect the motor from burnout, which is safer and more durable..
  • Simple Operation - Both sides adopt ergonomic double handles and made of special-shaped materials to provide a comfortable grip and better reduce vibration. Help you reduce fatigue and facilitate operation..
  • Widely Used - MLLIQUEA industrial grade grouting mixer is made of lightweight, durable materials and carbon steel stirring rods, with high quality. Suitable for mixing paint, cement, feed, resin, ink, thin mortar, gypsum, cement adhesives, etc. Which greatly save your labor time..
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • ...blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Check Stock

National Hardware N278-879 V7721 Corrugated Joint Fasteners in Bright, 30 pack

  • Siding Nails 2-1/4-Inch x .092-Inch, 15-Degree Collated Wire Coil.
  • Full round head and ring shank, hot dipped galvanized fiber cement material offers superior protection in all pressure treated lumber.
  • Material - HDG steel (Hot-Dipped Galvanized Steel).
  • 2-1/4-Inch x 0.092-Inch. Also know as siding nails 2-1/4In, siding nails coil, coil nails siding, coil nails 15 degree, coil nails 2-1/4In.
  • Package includes 12 x 300 count siding nails.
Check Stock

1 qt Dap 31084 Bondex Ready-Mix Concrete Patch

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add pigment powder as follows: 1. Calculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25.
  • 3. Pour the pigment powder into the cement. 4. Evenly mix cement and pigment powder. 5. Mix cement and pigment powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
  • White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
  • Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
  • The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
  • If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. T....
Check Stock

Bon 32-500 1 Pound Bag 3/4-Inch Anti-Crak Concrete Fibers (4, 3/4-Inch)

  • Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
  • Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
  • 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
  • Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
  • White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
  • Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
  • The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
  • If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. Thanks ).
Check Stock

Cannulated Reamer Orthopedic Instrument (8 mm - 14 mm) (1, 12 MM)

  • [INTEGRAL MOLDING] The reamer is integral molding, after quenching, which has stable sizes and good durability..
  • [CEMENTED CARBIDE] Made of cemented carbide material, with high hardness and wear resistance, not easy to deform and corrode..
  • [HIGH EFFICIENCY] With fine grinding flutes, chip removal is smoother without clogging, efficient and labor saving in operation..
  • [UNIVERSAL SHANK] The machine reamer has universal shank design, stable in clamping and not easy to slip or fall off..
  • [APPLICABLE MATERIAL] Suitable for drilling stainless steel, carbon steel, cast iron, die steel, alloy steel, non ferrous metal materials..
Check Stock

Owl Relief Concrete Flower Pot Silicone Mold, Succulent Planter Mold Clay Cement Vase Mould Pen Candle Holder Mold

  • Size&Weight: Mold Size(DIAxH):3.35x3.54in/8.5x9cm, Mold Weight: 5.4oz/153g..
  • Usage: Make flowerpot, succulent planter, vase, pen holder, soap or candle holder, jewelry container,cement clay crafts, flowers craft art, bonsai, desk decoration and more..
  • Unique gift: Perfect gift on birthday,Thanksgiving, Christmas,Mother’s day, Valentine’s day, New Year gift and so on..
  • Applicable filling materials: Mainly use with modelling clay(air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin), concrete, cement, plaster, hot glue, mix media and more..
  • Material: made out of soft flexible silicone ,reusable, easy to demould, non-stick, resistance to temperature -40-230 degree centigrade(-104°F——446°F).Easy ot use and clean..
Check Stock

Eco-Tuff Clearcoat Bio-Polyurethane Concrete, Wood, Floor Sealer, Countertop Sealer, Satin, 5 Gallon

  • EXCELLENT SURFACE FINISH: The Eco-Tuff concrete sealer is formulated to provide a long-lasting, durable, and protective coating on concrete, wood, primed metal surfaces and more. It is interior and exterior grade with excellent UV protection..
  • ABRASION RESISTANCE: Formulated with bio-polyurethane, the countertop sealer provides excellent surface resistance from scratch, hot tire pick up, abrasion, water, chemicals, and UV..
  • EASY TO USE: This cement and wood sealer can be applied with mechanical airless or HVLP sprayers, trim pads, rollers or with a high-quality brush..
  • VERSATILE APPLICATIONS: Get a fine finish on concrete, masonry, wood, cement, and natural stone surfaces. It can also be used on cabinets, garage floors, doors, , manufactured products, and tiles..
  • NON-TOXIC, SUSTAINABLE: The gloss finish sealer is virtually odorless, non-toxic and plant-based. It is an epoxy alternative, free of off gassing and no Red List Chemicals..
Check Stock

5 X 6 FIBER CEMENT BLADE CARDED

Check Stock