ReviewsHotend For 3d Printer

MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle

100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..

Check Stock

Haldis 3D Printer Bowden Extruder Hotend Kits,Upgraded 24V Volcano All Metal V6 J-Head Extrusion Hot End Parts with 5 Pieces Brass Nozzle + 3 Cooling Fans 3010 for All 1.75mm E3D V6 Makernot

【UNIVERSAL UPGRADED V6 HOTEND KIT】: Compatible with all 1.75mm E3D V6 Makerbot 3D printer.
HotEnd featuring an all-metal design with....
【STANDARD BRASS NOZZLE】: Nozzles are made of high quality brass,Heavy duty and provide a long service life.Easy to install and change.include 5....
【PREMIUM COOLING SYSTEM】: 24V / 40W heating, the temperature can reach up to 350 ° C，and we adopt 3 pieces cooling fans (30*30*10mm).Multiangle....
【ASSEMBLY NEEDED】: The package include all parts.No-Solder, No-Tape, No-Adhesive Assembly And Maintenance，Easy to Install..
【QUALITY GUARANTEE】: We are committed to providing more reliable product and better customer service to our customers,if you aren't 100%....

Check Stock

PTFE Bowden Tube 1M 1PCS+ 6pcs KJH04-M6 Fittings + 6pcs JP4-01 Pneumatic Fittings with PTFE Tube Cutter for 3D Printer 1.75mm Filament

3*1 Meter Original Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate....
1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
6 * JP4-01 and 6 * KJH 04-M6 bowden tube fitting to secure PTFE in extruder and hotend..
Easy to Install: the pneumatic fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube....
Compatibility: fit for 3D Printer 1.75mm Filament and other devices..

Check Stock

Hardened Steel Nozzle 0.4 mm/ 1.75 mm 3D Printer MK8 Nozzles Tool High Temperature Wear Resistant Compatible with Makerbot Creality CR-10 All Metal Hotend Ender 3/ Ender3 pro Prusa i3 5 Pieces

Durable material: MK8 extruder nozzles are made of hardened tool steel, good abrasion resistance, heat resistance and corrosion resistance, sturdy....
Good performance: this hardened tool steel nozzle has higher toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but....
High precision: the inner wall of the MK8 nozzles is smooth and has no burrs, the viscosity coefficient is small, extruder nozzle diameter error less....
Compatibility: these 3D printer nozzles compatible with MK8 hotend for Creality 3D printers, such as Ender-2/ Ender-3/ Ender-3 pro/ Ender-5, also....
What you get: package comes with 5 pieces of black MK8 nozzles, the size is 0.4 mm, sufficient quantity to facilitate your timely replacement,....

Check Stock

2-Pack Long Lifetime 3wires 50x50x15mm DC Fans DC 5V Cool Blower Fan 5015 Extruder Hotend Cooler Front Hotend Fan for Prusa i3 MK3 MK3S MK2/2.5 3D Printer

Dual Ball bearing fan, Long lifetime 50000Hours tested under 40degree temperature.
It has two sides, but the side with sticker must be always facing the hotend (not visible when the fan is mounted). Otherwise, the cooling won't work....
5V DC 0.1A, This fan is used for Prusa i3 MK3 MK3S MK2/2.5 3D printer Extruder.
Power connector:3pin with RPM measuring function.
Package:2piece 5015 Front hotend blower fan.

Check Stock

3D Printer Cooling Fan 40mm x 40mm x 10mm Blower Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino (24V 0.08A)

❃❃ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup..
❃❃ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation..
❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern..
❃❃ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 24V, 0.06A..

Check Stock

WINSINN 50mm 5015 Blower Fan 12V, 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 4Pcs)

✔️WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place..
✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA.
✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm.
✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products..

Check Stock

WINSINN 50mm 5015 Blower Fan 12V 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing 1000mm/39in Cable Brushless Cooling 50mmx15mm 2PIN Pack of 4Pcs

✔️WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow....
✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work,....
✔️Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA.
✔️Connector & Cable length: XH2.54 – 39in(1000mm), meet connection needs.
✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel....

Check Stock

4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)

☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup..
☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation..
☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern..
☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A..

Check Stock

WINSINN 5015 Blower Fan 12V, 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 2Pcs)

✔️WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place..
✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
✔️Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA.
✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, DVD player, small communication devices for heat radiation, PC CPU server, DVRs, switches, network storage devices and can be used as a replacement fan for any electronic products..
✔️Packing List: 2 x 50mm Blower Fan 24v - Dual Ball Bearing, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm.

Check Stock

AITIAO 6Pcs 5015 Blower Cooling Fan,DC 24V 50x50x15mm 3D Printer Blower Brushless Cooling Fans 5015 Oil Bearing Turbine Fans Blower with 2Pin Terminal for 3D Printer Hotend Extruder Heatsinks

DC 12V 5015 blower cooling fan which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any other cooling needs..
Specification:Rated Voltage:DC 24V, Current:0.1A, Speed:5589±10%RPM, Noise:30dBA, Bearing: Oil Bearings..
Power Connection: 2Pin-XH2.54, Size:50*50*15mm(L*D*H), Cable length: – 11.8in(300mm).
Wide Application: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products..
Package Included: You will receive 6pcs 5015 mini cooling fan.Any questions, you can contact us and we will give you a satisfied solution..

Check Stock