Wiha 200mm VDE Needle Nose Pliers
- Made from high quality forged CV tool steel 50/52HRC.
- Soft vinyl grip handles are oil and solvent resistant.
ReviewsHrc Plate
Hercules Hot Knife Rope Cutter - Electric Benchtop 60mm Thermal Cutting Blade for Braid Fabric Webbing Belting Ribbon & More - Hotknife Hot Wire Cutting Tool & Heat Sealer (110V, 60W)
- The Hercules HRC60 is suitable for commercial and industrial use, the Hercules HRC60 can cut canvas, synthetic fabric, cloth, rope, cord, webbing, belting, ribbon and much more..
- The Hercules HRC60 will cut through a 1" nylon rope in less than 10 seconds..
- The HRC60 operated off of 110 volt DC and it heats up to 1200° Fahrenheit in less than 10 seconds..
- Kit includes the 60 watt Hercules HRC60 heat cutter, one 60mm cutting blade, hex wrench and wire cleaning brush..
- The HRC60 has a lighted on/off rocker switch, weighs 3.75 pounds, has a 70” power cord and a maximum cutting width of 60mm (2.25”)..
Stens Lower Mulching Blade Honda 72511-VK6-000 ea 1
- Replaces: Honda: 08720-vh7-000, 72511-vk6-000.
- Fits Honda: HRC216K2 HXA, HRC216K2 PDA, HRC216K3 HXA and HRC216K3 PDA.
- Length: 21 1/4" center hole: 3/4" outer hole: 3/8" center to center: 3 3/4" width: 3 1/2" thickness: .120".
RLECS Metal Positioning Puncher 130mm Golden Window Punch Brass Spring Type Center Punch for Steel, Wood, Plastic Window Glass Breaking Hand Tools
- Metal Positioning Puncher 130mm Golden Window Punch Brass Spring Type Center Punch.
- The main body of brass is made of high hardness chrome vanadium steel with a hardness of HRC58 degrees to 62 degrees and a total length of 5.1 inches. The handle diameter is 1/2".
- Adjustable tension, easy to use, industrial brass center punch with adjustable tension screw, you will be able to use one hand operation.
- Emergency window escape tools. Automatic center punch is not only suitable for wood and metal, but also can break glass windows, which means you can leave one window in the car and be ready at all times. Just use it in one corner of the window, it will break and fall, or it can be easily pushed out and escape.
- Very suitable for steel, wood, plastic window glass breaking hand tools. Break the position of glass and iron plate/PVC plastic/steel plate/wood/wall. This industrial brass center punch provides a starting point for your drill, making it easier for you to slip in narrow places.
Folding Pocket Knife, 2.8”D2 Steel Blade and Black Serrated, Carbon Fiber Handle with Thumb Stud Opener-Everyday Carry
- ▶【High Quality Material】2.8" D2 blade, heat-treated to 60HRC hardness. 3K twill full carbon fiber handle, matte color, provides a high friction comfort touch and stylish style..
JEDIST Flush Cutter, Sprue Cutter, Micro Cutter, ESD Wire Cutter, Stainless Steel Cut Tools with Spring Silicone Handle for Electronics Jewelry Model Craft Soldering Metal Plastic(Jed-05ESD)
- The type of Jed-05ESD is a universal flush cutter tool. It is a anti-static and demagnetized ESD flush cutter which made of martensitic stainless steel and designed a inverted V-shape edges. The thickness of steel plate is 0.12 inch and the length of cutting edge is 0.51 inch. The rigidity is HRC56-58 and the weight is 2.47 oz. It can cut through copper wire with diameter of 1.3mm and iron wire with 1.0mm. It can cut above 10 AWG stranded electrical wire..
- This wire cutter is made of martensitic stainless steel (8Cr13MoV).The steel is hardened through heating and quenching. This technology helps to enhance sturdiness and gives it a natural level of resistance against rust and corrosion even in marine, high temperature and humidity environment. The body of steel is heat-treated and bright-treated in vacuum and acid-free condition and its rigidity is 42-50HRC. The blade is heat-treated by high frequency wave and its rigidity is 56-58HRC..
- The handle of flush cutter is ergonomically made. The cover of cutter grip is made of silicon which is non-slip and flexible. This sprue cutter is loaded a stainless steel spring that returns the jaws to the open position automatically and the joint is lubricated by oil. The cutting blades are perfectly aligned and the ....
HSS Hole Saw Kits for Metal, 15pcs High-Speed Steel Hole Saw Bits, Sharp and Durable, for Cutting Holes on Wood, Plastic Sheet, Stainless Steel, Iron, Aluminum Plate(Hole Size: 15-53mm, 0.6-2.1in)
- 【Hole Saw Kits】- There are 15 sizes of hole saws for you to choose. You can cut holes from 15mm/0.59in to 3mm/2.1in according to your needs..
- 【Resistance and Durable】- The hole saw kit is made of HSS high-speed steel. The saw blade is extremely sharp, low consumption, durable, impact resistance and wear resistance..
- 【High Hardness】- The saw blade is quenched and has high hardness and strength(hardness 59-60HRC). Hole saw kits can drill about 7/9" depth for the wood, and 1/5" for the stainless steel..
- 【Individual Package】- Each HSS hole saw is individually packaged in a plastic box. You can easily use and store them..
- 【Wide Range of Applications】-The carbide teeth of the hole saw kit is able to cut clean, round holes in stainless steel, mild steel, iron, aluminum plate, alloy plate, plastic sheet, copper and brass..
Spring Tools 28R45-1 Hammerless Single Ended High Speed Steel Center Punch
- DURABLE MATERIAL: The center punch tip is made of high speed steel that holds up to strong impact, wear resisting and rust proof to prolong the punch life, high speed steel hardness: HRC58° ~ 60°..
- MULTI-USE: Automatic center hole punch is suitable for a variety of tasks, such as mark on materials, car emergency tools, alternative emergency hammer, and Iron plate positioning, wood positioning, wall positioning, etc..
- DESIGN: The pocket automatic center punch body has deeply knurled finger grip to achieve easy handling and better control.
- the non-pinch comfortable cap makes a good cushion for your palm against spring impact..
- IMPACT STRENGTH ADJUSTABLE: Impact strength adjustable, spring tension adjusts for light or heavy strokes, marking, punching and staking..
- HOW TO USE: Use the heavy head to align with the positioning point. Firmly press the handle and press it in the direction of the punch. After the punch is pressed back into the rod for a short period, the strong spring will vigorously eject the punch..
Durablow TR1003 Gas Fire Fireplace On/Off Remote Control Kit + Thermostat + Timer for Millivolt Valve, IPI Module, Replaces Wall Switch or Thermostat
- ▼ Thermostat feature in transmitter turns ON/OFF when room temperature changes. It also operates the fireplace with the room temperature swings 1 °F, 2 °F, or 3 °F. ▼ Timer feature operates at options of 15 minutes Min. to 9 hours Max...
- ▼ Receiver with LEARN function, snap-on wall plate, and 18-inch wires with connectors to gas MILLIVOLT valve or electric spark ignition module. ▼ Receiver box dimension: 2.6"x2.4"x1.54". (measure your wall outlet box first).
- ▼ Replaces Cross Reference Model #: SKY, 9800322, 9800323, 9800324, 9800326, 9800328, 9800329, 9800550, 9800580, 1001-A, 1001, 1001TH, 1001T, 1410T, 1410-A, 1410TH, 3002, 3301, CON, RCK-K, RCK-KS, 5001, 5010, 5301, 5310, 55644, HRC200 ▼ LEGAL DISCLAIMER: The Brand name & Model # (if listed) are for cross reference only. All Brands, Trademarks & Model Numbers remain the property of their respective owners..
- ▼ Includes: Remote transmitter, receiver box, wall mount cover plate, screws, slide switch, wires with connectors, manuals / instructions. ▼ FCC approved. Operates at a range of 20-foot & non-directional RF signal. ▼ Transmitter operates (2) 1.5V AAA batteries.
- Receiver operates 4 (AA) batteries. ▼ Strongly recommend Energizer Lithium Batteries. ATT....
Aceteel Metric M12 X 1.25 HSS Ti-Coated Straight Flute Thread Tap, M12 X 1.25mm Titanium Coated Thread Machine Tap Right Hand
- 【Size】Length: 3.50"/89mm, Thread Head: 1.14"/29mm, Square Head: 7.1mm x 7.1mm (L*W), Shank Diameter:9.0mm, Pitch: 1.25mm..
- 【Feature】Straight flute thread design, made of High-speed steel with high hardness and toughness, Titanium coating for improving wear and fusion resistance, long service life..
- 【Application】Make or repair thread, suitable for most metals, copper, alloy steel, stainless steel(below 30HRC), cast iron, aluminum, brass, abrasive steel, A3 steel, iron plate ETC..
- 【Usage】Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping..
- 【Package Included】1pc Metric Right Hand M12x1.25mm High-Speed Steel Titanium Coated Thread Tap..
Fryic Ratchet Crimping Plier VSN-03B Used for 21-9 AWG (Similar to 0.5-6 mm²) Non-Insulated Tabs and Receptacles Ratchet Crimping Tool
- Crimping capacity for 21-9 AWG (Similar to 0.5mm²-6mm²) Non-insulated Tabs and Receptacles.
- Adopt High quality carbon steel plate and Pressing die is powder injection MM process with 0.02mm accuracy, The overall size is stable and reliable , Material Fe8Ni, Higher Hardness HRC48-52.
- Comfortable handle is made of TPR elastic plastic, it is durable and easy to crack,Teflon Spraying on clamp body surface treatment to ensure ten years of rust-free.
- New mechanical structure design can save force 25%,and it can crimp big size capacity with small power.
- Unbeatable Satisfaction – Fryic products are backed by an unmatched reliability and consistency, coming with quality assurance you can trust. If you meet any problems, just don't hesitate to contact us.