ReviewsHss Bottom Tap And Die Set

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

ATOPLEE Spiral Point Plug Threading Tap ,5pcs HSS 6542 Titanium Coated Metric Right Hand Thread Taps,M3-M8

  • Tap and Die Bit Diversity – These tools are sold as a set for good reason. You really should look to get as much diversity in the sizes of the taps and dies as you can. That way you will be able to pull the right size out of the box when you need it..
  • Wrenches – All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer..
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of cour....
Check Stock

45 Pc Tap & Die Set Metric Mm Titanium Tungsten Steel Jumbo Thread Renew Tool

  • 86 Piece Tap and Die Set Bearing Steel Sae and Metric Tools, Titanium Coated with Metal Carrying Case.
  • Size:14.8 x 10.7 x 2.2"inch / 37.6 x 27 x 5.6cm. Weight:12lb / 5.4kg. Material upgrading:Alloy Steel 55¡ã- 60¡ã, Sizes Stamped Engraved-etched On the Metal.
  • SAE TAP SIZES and SAE DIE SIZES: 1/8"-27NPT, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16-24, 3/8"-16,3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18.
  • METRIC TAP SIZES and METRIC DIE SIZES: M3-0.5, M4-0.7, M5-0.8, M6-1.0, M7-1.0, M8-1.0, M8-1.25, M9-1.25, M10-1.5, M10-1.25, M11-1.5, M11-1.25, M12-1.75, M12-1.5, M14-2, M14-1.5, M16-2, M16-1.5.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
  • Easy Storage: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
Check Stock

110 Piece Combination Tap and Die Set Alloy Steel 55°- 60° Metric Tools with Carrying Case + Free Glove Amazing Tour

  • 110 Piece Combination Tap and Die Set Alloy Steel Metric Tools with Carrying Case + Free Glove Amazing Tour.
  • Size:18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, Sizes Stamped Engraved-etched On the Metal.
  • 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6 + 2 Antiskid Gloves.
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

  • Muzerdo tap and die set is one of those toolboxes that are not immediately intuitive to have but become essential to your work once you have it. It does not matter if you are a mechanic, a craftsman, a metal or woodworker, or even a DIY enthusiast, a tap and die set would be remarkably useful to you. Taps and dies are cutting tools used to create threads on components such as screws, bolts, nuts and to create a threaded hole to screw components into..
  • A tap is a threaded tool that cuts or forms threads in the female portion of a mating pair. Therefore, a tap will create threads in the inside of a hole. On the other hand, a die is a threaded tool that cuts or forms threads in the male portion of a mating pair. Therefore, a die will create threads on a cylindrical rod's surface to create a screw or bolt. Both a tap and a die create new threads or repair damaged threads..
  • Our tap and die set consists of taps, dies, and drill bits of different sizes for various applications. Included in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost..
Check Stock

Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT

  • Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT.
  • ​​​A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock....
  • 3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2"..
  • 3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4".
  • EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT3 IN OUR SHOP !.
Check Stock

Hanson 12008 1\ Rd Hex Plain Die Stock for Tap Die Extraction

  • CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die h....
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

86-Piece Master Tap and Hex Die Set, Premium Titanium Coating | SAE Size #4 to 5/8”, Metric Size M3 to M16 | For All Coarse, Fine, Pipe Threads | Complete with Holders, Stocks, Gauges and Metal Case

  • ...at includes a full range of SAE standard and Metric sizes from small to large with both coarse and fine teeth, designed for all kinds of internal and external threading, rethreading, or thread repairs jobs.
  • [PREMIUM MATERIAL AND COATING]: Industrial grade high speed steel (HSS) construction with unique titanium coating provides maximum strength and lasts 3 times longer than normal ground finished tap die for rust and corrosion prevention.
  • [EXCELLENT CUTTING PERFORMANCE]: All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance on a wide range of materials such as wood, carbon steel, cast iron, aluminum, brass, copper, stainless steel.
  • [HEXAGONAL SHAPE DIES]: Hex dies can be used with wrenches and sockets for added leverage, so they work much better than round dies for greater torque applications and in tight spaces. Hexagon dies fit both needs to create new thread or chase old thread, while round dies are usually to create thread only.
  • [COMPLETE SIZE COVERAGE]: Set includes (42) SAE standard and (36) metric ....
Check Stock

AUTOKAY New HSS 5/8\-24 UNEF Right Hand Thread Tap and Die Set (5/8x24) RH

  • Thread diameter (D): 5/8'' or 0.625inch or 15.875mm.
  • Application: Cutting Tools & Consumables, arbon steel,alloy steel and cast iron hole processing etc.
  • High speed steel (HSS) provides good wear-resistance.
  • Can be used in general purpose applications for both ferrous and non-ferrous materials.
  • Package:1x 5/8" - 24 TAP,1x 5/8" - 24 DIE.
Check Stock

PTSTEL 39 PCS Tap and Die Set Metric & SAE Essential Threading Tool Kit for Cutting External and Internal Threads with Adjustable Handles Accessories and Case

  • High-quality & Durability: PTSTEL metric & SAE tap and die set is made of industrial grade GCR15 bearing steel, which is non-corrosive and durable,....
  • Efficient Cutting: All cutting teeth of the tap and die set are precisely CNC machined and accurately heat treated to a rockwell hardness 60 HRC to....
  • Wide Range of Applications: The cutting thread tool set is processed with internal thread and external thread, and strong torsional force is ideal for....
  • Easy to Storage: Each taps and dies set is equipped with plastic tool box with corresponding scales engraved. You will never get the wrong size when....
  • Most Complete Size: 17pcs metric & SAE tap and die set: SAE: 5/16-18, 3/8-16, 7/16-14, 1/2-13, NPT tap (1/8-27), #4-40, #6-32, #8-32, 1/4-20 METRIC:....
Check Stock