ReviewsHss Co Steel Spiral Point Taps

Luckyway 1-Piece 15 Steps HSS-CO(M35) 1/4 Inch to 1-3/8 Inch Titanium Step Drill Bit for Metal, Stainless Steel Drilling

  • DIMENSIONS - 15 STEP SIZES: 1/4",5/16",3/8",7/16",1/2",9/16",5/8",3/4",7/8",15/16",1",1-1/8",1-3/16",1-1/4",1-3/8"..
  • APPLICATION - Capability and durability in drilling holes in plastic, aluminum, copper, stainless steel,HRC40 steel plate and many other types of sheet metal.★If used in 4mm stainless steel plate, can make more than 500 holes. ★It can be used to bore holes in steel plates up to HRC40..
  • MATERIAL - HSS-CO(M35)for longer life, higher efficiency,very easy drilling.Service life: M35>M2>HSS4241.
  • FEATURES - 135° SPLIT POINT TIP: increases cutting speed with self-centering and prevents walking..
  • TWO-FLUTE DESIGN: Clears chips faster and allows particles to escape easily..
Check Stock

Tap Drill Bit Set, M3-M10 Tap Drill Bits Kit Titanium Coated HSS Drill and Tap Bits 1/4\ Hex Shank Metric

  • High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
  • Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
  • Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
  • 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
  • Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
Check Stock

Hanson 1765531 Pts Drill Plus Tap Combo 6-32' Number 36 for Tap Die Extraction

  • This tap and drill set contains a convenient HCS tap and HSS drill bit.
  • Self-aligning taps start and thread straight virtually every time.
  • Great for through holes and irregular surfaces.
  • Plug taps are ideal for general purpose threading.
  • Special chip-breaking technology cuts chips easier.
Check Stock

OCGIG Large Spiral Groove Step Drill HSS Cone Bit Hole Cutter Stepped Up Unibit 6-60mm 12 Steps for Aluminium Metal Wood PVC

  • Material：HSS4241, High hardness, rustproof, solid and durable.
  • Split Point Tip：Increases cutting speed with self-centering and prevents walking.
  • Spiral Design：2 Flute spiral blade design makes the cutting faster and smoother, and automatically deburred from the hole when the drill bit is drilled.
  • Application：Suitable to cut holes in a variety of material like iron plate, aluminum plate, insulation boards, PVC sheet, ect.
  • Package includes：1 x 6-60mm HSS Groove Step Drill (12 Steps:6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm).
Check Stock

Hymnorq 1/8 Inch Fractional Jobber Twist Drill Bit Set of 10pcs, Heat Resistant M35 Cobalt Steel, Fully Ground and Straight Shank, Suitable for Repeated Drilling in Iron and Stainless Steel

  • HSS-CO MATERIAL – Manufactured from M35 grade cobalt steel, 5% cobalt added to creates a hardened alloy, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit..
  • 135°SPLIT POINT – the 135°quick-cut split point are self-centering and able to penetrate metals quickly with less pressure, prevent bits from “walking and wanding”. Easy cutting without need of center punch..
  • FOR METALWORKING – Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • 10PC SET – The set includes 10pcs of 1/8″ diameter M35 grade cobalt steel twist drill bits, packed in a plastic case for easy storage and carrying. Manufactured to German DIN338 standard..
  • DOWNLOADABLE USER GUIDE – We’ve summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to download..
Check Stock

YAKAMOZ 30Pcs Thread Repair Insert Kit Damaged Threads Rethreading Drill Bit Taps Tool Set for Helicoil Type Metric M6 Internal Screw Holes Repairing

  • Master helicoil thread repair kit used for creating stronger internal threads in all metals, composites, polymers and other materials by repairing damaged or stripped internal threads and regaining the original thread size..
  • 304 Stainless thread inserts create longer lasting durable threads, increase the possibility of higher torque application in weaker metals..
  • Master thread repair kit includes a collection of tools including HSS drill, tap, thread inserts, installation tool, break pin tool..
  • Metric Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tools.
  • Includes 25 Each thread inserts: M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5.
  • SAE Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tool.
  • Includes 25 Each thread inserts: 1/4''-20, 5/16''-18, 3/8''-16, 7/16''-14.
Check Stock

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

  • Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
  • Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
  • Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
  • Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
  • Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....
Check Stock

Meichoon Step Drill Bit Set Large HSS Spiral Groove 6-60mm 12 Steps Sizes, Cobalt Countersunk Drill Cone Drilling Tool Hole Cutting Enlarge Metal Sheet PVC Sheet Wood, Triangle Handle, DC18

  • HSS & Titanium Coating - High speed steel makes it last longer than others, titanium coating ensures easily cut through steel sheets, aluminum sheets, copper & plastic & wood board and many other types of sheet metal with ease..
  • It can automatically deburr holes while drilling to keep the drill bit clean..
  • A necessity for family or handyman or professionals - Perfect for home repairs and light jobs such as drilling holes in plastic, aluminum, copper and many other types of sheet metal..
  • Package includes: 1 x 6-60mm Spiral Groove HSS Step Drill (12 Steps: 6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm).
Check Stock

Greenfield Threading 330133 GT/VTD SPGP D5 2FL GP Plug Spiral Point Tap, M8 x 1.0 mm

  • Greenfield Threading Plug spiral point tap: M8x1.0: Limit D5 number of flutes: 2. HSS substrate, bright finish..
  • Made from Premium High Speed Steel and Bright finish.
  • Made to Table 302A. 1.0 Threads Per Inch.
Check Stock

Jerax tools M2 HSS Taper Chucking Reamer 4pcs Set 3/8 1/2 5/8 3/4 Fit 3/8 or 1/2 Shank Chuck Spiral Flute Bridge/Construction Reamer for Steel Alloy Aluminum Wood Plastic

  • [M2 HSS material]: Compared to other commonly used lower grade HSS, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability..
  • [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability..
  • [Tapered point]: allow entry into overlapping holes..
  • [Application]: enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8"(10mm) thick mild steel for impact driver or 1" (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed..
  • [Sizes]: 4 pieces, including 3/8" (fit 3/8'' shank chuck), 1/2", 5/8" and 3/4" (fit 1/2'' shank chuck)..
Check Stock

TOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.

  • For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
  • The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
  • Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
  • Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
  • Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
  • 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
  • 16 PCS HSS drill bits ( 5/64″ to 1/2″).
  • Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check Stock