ReviewsHss Cutter

13 Pro Vinyl floor cutter LVT-330 with Sharp HSS Replacement Blade

Shars 4 Pieces 60 Degree HSS Dovetail Cutter Set 404-1620 P}

• Cutting diameter: 3/8", 1/2", 3/4", 1-3/8".
• Designed to take the place of arbor and threaded hole type cutters.

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

• FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
• Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
• DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....

Paper Cutter Paper Trimmer Authentic COME 9770EZ 19Inch A2 19 Commercial Heavy Duty Guillotine Stack Paper Cutter 300 Sheets Metal Base Desktop New

• THE ONLY AUTHENTIC 19” PAPER CUTTER THAT CUTS THROUGH 300-SHEET OF 20LB PAPER LIKE BUTTER - This is an authentic COME-9770EZ Stack Paper Cutter. This machine’s cutting width is 19” (much bigger than the 12” models) and cutting capacity is 300-sheet of 20lb bond paper. Your satisfaction is guaranteed..
• AUTHENTIC – This is the AUTHENTIC COME 9770EZ 19” stack paper cutter equipped with the back support/extension table. The back support/extension table extends the back side of the cutter and provides a more well balanced and stable platform for the cutter. It also provides balanced support for the stack to be cut and catches the output from the cutter..
• AVOID ACCIDENTAL CUTS AND RESHARPENABLE AND REPLACEABLE BLADE - It has a built-in safety lock mechanism that is engaged automatically to prevent accidental cuts until released. The blade is re-sharpen-able and replaceable..
• NO NEED TO SHARPEN THE BLADE UNTIL AFTER THOUSANDS OF CUTS - The blade edge is made of high-speed steel (HSS) with the hardness grade of 60-62 on the Rockwell Equivalent C scale (i.e., 60-62 HRC). It will last over thousands of cuts before requiring re-sharpening or replacement. it is razor sharp and can cut through 300 sheets of 20lb paper stack with a single easy stroke..

TECHTONGDA Sharpener End Mill Lathe Drill Bit Knife Grinder R8 Collects with Accessories

• Five R8 collects are equipped with the multi-functional cutter grinder sharpener. The size of the collects are 0.15”, 0.2”,0.3”, 0.4”, 0.5”..
• Accessories for end mill, lathe, drill Bit are included. These accessories will help you better finish the work..
• 2 kind of grinding wheels are included. One is made of white corundum and one is made of metal..
• Two fine-tuning bearings guarantee the accuracy and the sharpening quality. The universal index head is provided at 24 positions so that any particular angle of shape can be obtained..
• The sharpener is mainly used for grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiuses cutters or negative taper angle of cutters..

Lutz 15-IN-1-Y Yellow/Black 15-IN-1 Ratchet Screwdriver

• Material : High Quality HSS, Size: 1/2x1/2x4".
• Make your own LH, RH, boring, internal threading or form tools.
• Parallelogram design. High speed steel tool bit for lathe. Used for fabrication of cutting tools for milling, turning, parting, engraving, drilling,....
• Commonly used on a lathe, a milling machine fly cutter or a metal shaper.

ZOENHOU 2 Set 3 Inch 75 mm Hole Saw with Arbor, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter, Hole Drilling Tool Drill Bit Saw for Cutting Wood, Metal, Plastic, Fiberboard

• TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
• SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi-metal drill bit: easy and fast, smooth and clean cutting..
• EFFICIENT AND DURABLE - 0.43 inch hex shank arbor with two pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
• ONE SET WORKS IT ALL- This complete HSS hole cutter including 2 pieces 2-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.43 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
• 100% RISK-FREE SHOPPING - If you are not satisfied with our 3 Inch 75 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our first priority..

DBM IMPORTS 1 Pc 3/4 x 60 Degree Premium HSS Dovetail Cutter Milling

• Made of precision ground, high grade tool steel.
• 60-degree included angle, right hand cutting tool.
• Unit Dim L x W x H (in): 2-1/8 x 3/4 x 3/4 * Estimated*.

TECHTONGDA Cutter Grinder Drill Sharpener Sharpening Machine for End Mill Twist Drill Cutter Grinding Tool 220V R8 Collects

• 5 R8 collects are equipped with the multi-functional cutter grinder sharpener. The size of the collects are 0.15”, 0.2”,0.3”, 0.4”, 0.5”..
• 2 kind of grinding wheels are included. One is made of white corundum and one is made of metal..
• Two fine-tuning bearings guarantee the accuracy and the sharpening quality. The universal index head is provided at 24 positions so that any particular angle of shape can be obtained..
• The sharpener is mainly used for grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiuses cutters or negative taper angle of cutters..
• Packaged in wooden case for better protect the machine from being injured in transit..

6-3/8 Inch Hole Saw with Heavy Duty Arbor, 6 3/8”Recessed Lighting Hole Saw with 1-1/2 Inch Cutting Depth, Bi-Metal Hole Cutter for Smoothly Cutting Ceiling Tile Drywall Plywood Plaster Metal Plastic

• ... drill precise holes fast in varied ceiling materials like drywall, plywood, ceiling tile, fiberglass, cement board, plaster and MDF.
• 6Inch recessed light fixtures requiring the 6-3/8" hole saw that suitable for most major brands of 6-Inch (162 mm) recessed lighting fixtures.
• 【Wide Applications 162MM Hole Drilling Cutter】Made with a continual rim, Bi-Metal hole saw cut metal and wood quickly and cleanly without tearing the material, widely used for cutting 6inch holes in metal, plaster, wood, plastic, acrylic-board, steel and aluminum.
• Essential home hole cutter for ceiling lights, recessed light, cornhole board, air ducts, speakers, range hood.
• 【Smooth and Fast Cutting】Designed with the non-binding clean edge and sharp carbide teeth, the heavy duty 6-3/8” hole saw can cutting faster, smoother, and more precise holes than most hole saw on the market.
• Widely used in plate holes, household wood, galvanized pipe, gypsum board and other opening operations.
• 【Package & Size】The package includes 1pcs 6-3/8Inch hole saw with 7/16” shank heavy duty arbor, 3pcs HSS drill bits and 1pcs hex wrench.

Patioer Hole Cutter, 1-5/8" to 8" (40-200mm) Adjustable Hole Saw Cutter, with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Vent Holes

• Adjustable Hole Saw Cutter: This kit includes 1x adjustable hole saw with two replaceable pilot drill bits (1 x auger type self-feed pilot bit +1x HSS pilot bit), 2x high speed cutting blades,1x ABS dust shield, 1x adjustment hex wrench, 5x brad-point wood drill bits and 5x Masonry drill bits, 1x carpenter pencil, 1x 3m tape measure and 1x durable storage case..
• Size Adjustable: Twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
• Application: It can be used to cut plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc. A practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners..
• Easy To Carry: The hole saw cutter comes with a sturdy carry case for easy storage and organize. Easy and convenient to carry. Improve work efficiency..