ReviewsHss Extra Length Drill

40mm HSS Tungsten Carbide Hole Saw, TCT Cutter Drill Bit for Metal Stainless Steel Wood Aluminum

  • ❶SIZE: 40mm(1-9/16”) hole saw diameter, 86mm(3.38”) length, 10mm(0.39”) shank..
  • ❷RESISTANT and DURABLE: hole saw is made of HSS high speed steel, with extremely sharp blade, low consumption and durable with impact resistance, wear resistance..
  • ❸PRECISE and EFFICIENT: tungsten carbide teeth of the hole saw is able to cut clean, round holes in stainless steel, mild steel, iron, aluminum plate, alloy plate, plastic sheet, copper and brass..
  • ❹WIDE RANGE of APPLICATIONS: hole saw kits are suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine..
  • ❺ALL IN ONE DESIGN: drill bit, spring, wrench are included, no need to buy extra accessories..
Check Stock

Drill Hulk 7-Piece M35 Cobalt Left Hand Drill Bit Set for Removing Damaged Bolts and Screws, 5/64-Inch, 7/64-Inch, 5/32-Inch, 1/4-Inch, 19/64-Inch

  • STUBBY MECHANICS LENGTH: 135 degree split point reduces drill walking, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for removing damaged bolts and screws, or drilling a pilot hole for a screw extractor.
  • INCLUDE: 2pcs 5/64 inch, 2pcs 7/64 inch, 1pc 5/32 inch, 1pc 1/4 inch and 1pc 19/64 inch cobalt left hand drill bits with case.
Check Stock

uxcell 10 Pcs Split Point High Speed Steel Fully Ground Micro Twist Drill Bits 1mm

  • 10 x Twist Drill Bit : 10 x Twist Drill Bit.
Check Stock

Prolinemax 18 Pc Metric HSS Tap & Drill Set

  • Tap Sizes: M2.5 x 0.45, M3.0 x 0.50, M3.5 x 0.06, M4.0 x 0.70, M5.0 x 0.80, M6.0 x 1.0,M8.0 x 1.25,M10.0 x 1.50,M12 x 1.75.
  • Drill Metric Sizes: 2.05,2.50,2.90,3.30,4.20,5.00,6.70,8.50,10.2mm.
  • Case Overall Dimension: 8''L x 4-3/8''W x 1-1/4''H *Estimate Only*.
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock

uxcell HSS(High Speed Steel) Straight Shank Jobber Twist Drill Bit 6.5mm Drill Diameter Extension 160mm Length 2 Pcs

  • [Package Content]- 2 Pcs 6.5mm drill dia. 160mm total length hss straight shank twist drills..
  • [Strength and Hardness]- Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life..
  • [Professional and DIY Use]- Suitable for hardened materials and hard metals, such as cast iron, hard plastics, and also suitable for soft materials. When it cannot penetrate, try to adjust the RPM..
  • [Twisted Design]-With the twisted design, it can improve cutting accuracy by centering the tip. It can avoid displacement of the drill bit during work, and at the same time remove debris and particles faster and easier..
  • [Note]- Please keep cool and gentle using, the working life of the twist drill bits can be largely prolonged by proper usage.
Check Stock

Chicago Latrobe 110X High-Speed Steel Extra Long Length Drill Bit, Black Oxide Finish, Morse Taper Shank, 118 Degree Notched Point, 9/16\ Size

  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials.
  • Self-centering 118-degree notched point penetrates material without a pilot hole more easily than a conventional point, and maintains a sharp cutting edge.
  • #2 Morse taper shank is made to American Morse Standard dimensions and installs directly into a tool's spindle, sleeve, or socket of the same taper for a tight, self-holding fit.
Check Stock

Chicago Latrobe 110X High-Speed Steel Extra Long Length Drill Bit, Black Oxide Finish, Morse Taper Shank, 118 Degree Notched Point, 5/8\ Size

  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials.
  • Self-centering 118-degree notched point penetrates material without a pilot hole more easily than a conventional point, and maintains a sharp cutting edge.
  • #2 Morse taper shank is made to American Morse Standard dimensions and installs directly into a tool's spindle, sleeve, or socket of the same taper for a tight, self-holding fit.
Check Stock

Chicago Drill (Type Beat 2021)

  • Set of 15 jobber length drill bits includes inch sizes 1/16" through 1/2" in 1/32" increments.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material.
  • 118-degree conventional point for a range of drilling applications.
  • Jobber length drill bit has a midrange drilling depth suitable for general-purpose drilling applications.
Check Stock

Chicago Drill Type Beat

  • Set of 29 jobber length drill bits includes inch sizes 1/16" through 1/2" in 1/64" increments.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material.
  • 118-degree conventional point for a range of drilling applications.
  • Jobber length drill bit has a midrange drilling depth suitable for general-purpose drilling applications.
Check Stock