ReviewsHss Hand Taps

1pc UNC UNF Thread end Mill Carbide Alloy 3 Tooth Coated Thread end Mills CNC Threading milling Cutter Tool for UN Thread,UNC3-48-D1.9

Brand new metric HSS right hand thread tap..
If there is anything taps or dies you need, do not hesitate to contact us. There are a variety of sizes available but they are not all listed..

{High Quality Material} The tap is made of HSS6542 material, which is stronger and more durable than ordinary taps..
{Size}Total Length:101mm,Shank Diameter:12mm,Pitch:2mm..
{Note}This is a small straight groove tap, which can be used for tapping of round through holes or shallow blind holes. Pay special attention to not being used for blind hole tapping..
{Widely Usage}Tapping can be done on stainless steel, iron, aluminum, copper, general steel and other materials. It can be used with manual equipment or special processing consoles, such as tapping machine, driller's integrated bench drill, CNC numerical control lathe, machining center, etc..
{Package Included} 1x Left hand Thread Tap.

【Material】This thread tap is made of HSS 6542, which is stronger and more durable than ordinary taps..
【Size】Thread Diameter:12mm,Total Length:88mm.
Shank Diameter:9mm, Pitch:1.25mm；Thread Length：28mm..
Square Head Size:6.8x 6.8mm (L*W) ,Net Weight:0.045 kg.
【Usage】When using this product for tapping, it can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc. With this product, you can finish tapping on stainless steel, iron, aluminum, copper, general steel and other materials..
【Package Included】 1pcs Metric Right hand Thread Tap.

Product Name: CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8.
✔ Type Size: M3: 3 mm * 0.5 , M4: 4 mm * 0.7 , M5: 5 mm * 0.8 , M6: 6 mm * 1 , M8: 8mm * 1.25.
✔ Material: HSS 6542 Titanium coating, cutting will not be left. Have good machinability. High hardness, fast cutting, wear high temperature.
✔ Spiral groove is reduced to remove crumbs, not easily broken tap. Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and Sticky materials processing.
✔Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum, hardwood, plastic.

Package included:1pc HSS right hand thread tap M12x1.25 and 1pc Drill bit 10.8mm..
My Note: During use, apply machine covers and wear safety glasses when using taps for cutting threads. Do not use excessive force or load as it may cause the tap break ..
Model / Size: M12 x 1.25 tap RH with Drill bit size 10.8mm..
Thread Type: Right Hand Thread M12x1.25 Tap RH.
My Note: All Products are testde rigorously. High speed steel offers precision cut threads, accurately formed for consistent, exact threading tool..

1.This 166pcs Thread Repair kit is for repairing damaged or stripped Internal screw threads..
2.Set includes :5 installation tools,5 break pin tools,5 twist drills ,5 taps,1 hex key and 145pcs wire thread inserts (M5,M6,M8,M10,M12)..
3. The installation tools in this kit is made by high-speed steel for superior handling.one HSS tap for each size, one HSS drill for each size, 2 Insert tools for each size, Thread Inserts for each size..
4.The kit has 166 Pieces, all made according to professional standard.its suitable for engine repair and other automotive applications..
5.It packed in a convenient steel carrying case, easy and fast in storage..

Made from HSS6542, coated with titanium, high hardness and rust resistance, long service life..
Tap Size: M2*0.4, M2.5*0.45, M3*0.5, M4*0.7, M5*0.8, M6*1, M8*1.25, M10*1.5, M12*1.75..
Spiral flutes, good chip removal effect, can tap to the bottom of the blind hole. M2-M6 pointed head, M8-M12 flat head..
Can be used for processing iron, aluminum and other materials. Like stainless steel, cast iron and other difficult to machine materials, please choose cobalt taps..
Used on drilling machines, tapping machines, CNC and milling machines, not for hand electric drill..

...ger internal thread in soft metals and protects tapped threads against wear and damage. It is suitable for repair stripped or damaged internal threads and widely used in automotive and plumbing applications..
【SAE & METRIC】: Standard 261pcs thread repair kit, includes HSS drill bits, wire thread inserts, STI taps, installation and tang break tools. 1/4", 5/16", 3/8", 7/16", 1/2", M5, M6, M8, M10, M12 of SAE and metric sizes get you fully equipped..
【EXCELLENT MATERIAL】: The helicoil kit is made of high-speed steel, with better hardness and toughness after heat treatment. Chrome finish surface is for anti-rust. The thread inserts made of heat-treated 45# steel has better toughness and is not easy to wear and deformation. Extended service life..
【HIGH PRECISION】: 135° apex angle of twist drills, with stronger metal penetration and higher efficiency. HSS screw taps have precise screw threads, offer large chip space and small resistance during cutting. Workmanship meets and exceeds ANSI standards..
【PORTABLE & GUARANTEE】: Everything you’ll need for thread repairing is supplied in a durable carry case, ensuring safe storage and protection when not in use. Sizes and quantities are marked on each thread insert box inside for your conv....

【WIDELY USED】: Our drill and tap set creates a stronger internal thread in soft metals and protects tapped threads against wear and damage. It is suitable for repair stripped or damaged internal threads and widely used in automotive and plumbing applications..
【SAE & METRIC】: Standard 261pcs thread repair kit, includes HSS drill bits, wire thread inserts, STI taps, installation and tang break tools. 1/4.

Size of Taps: M2.5X0.45, M3.0X0.50, M3.5X0.60, M4.0X0.70, M5.0X0.80, M6.0X1.00, M8.0X1.25, M10.0X1.50, M12.0X1.75..
Size of Drills: 2.05mm, 2.50mm, 2.90mm, 3.30mm, 4.20mm, 5.00mm, 6.70mm, 8.50mm, 10.20mm..

TITANIUM COMBINATION DRILL TAPS: These HSS drill and tap bits are great tools used to create screw threads, to cut or form the female portion of the mating pair. Drill tap bits increase efficiency of operation by allowing for drilling and tapping to be accomplished in a single pass..
THREAD AND PITCH SIZE: M3, M4, M5, M6, M8, M10/0.7mm, 0.8mm, 1.0mm, 1.25mm, 1.5mm, with 1/4inch hex shank..
USER FRIENDLY: Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks..
APPLICATION: They are used on a machine to do the tapping, such as a lathe. Machine tapping with these taps is faster, and generally more accurate because human error is eliminated..
GUARANTEE: If there any issue about this product, please CONTACT us, we will give the best solution in the first time. we guarantee replacement or refund..