ReviewsHss Reduced Shank Drills

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • .../16") bit replacement Only (Without the 4 Flute cutter countersink counter-bore), made to replace the 3/16” bits of #10 countersink drill bit set for wood , with 1 Hex Wrench (1/8 inch Allen Key) included. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills.
  • Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 drill bit replacement set. Cou....
Check Stock

Chicago Latrobe 790 Solid Carbide Spotting Drill Bit Regular Length Uncoated Bright Finish Round Shank Right-Hand Spiral Flute 120 Degree Conventional Point 1/4 Size

  • Spotting drill bit creates a pilot hole to reduce walking and improve hole accuracy.
  • Solid carbide drills produce close-tolerance holes in hard materials, and have a longer tool life at higher speeds than cobalt and high-speed steel (HSS).
  • Uncoated (bright) finish has no additional surface treatment or coating.
  • 120-degree conventional point drills a pilot hole to accurately guide a 118-degree secondary drill bit.
  • Round shank accommodates most drill chucks.
Check Stock

Drill Bits Set/Screwdriver Bit Set, Longmate 226-Piece Drilling and Driving Accessories with Drywall Anchor and Screw, Drill Sets Combo Kit for Wood Metal Concrete Drilling and Screw Driving

  • .../5/6/6/8mm, 28 x screwdriver bits, 170 x plastic anchors and screws, 1 x Magnetic bit holder.
  • 【HSS, BRAD POINT & MASONRY BITS】Twist drill bit is made by HSS4341 which is more hard and durable than 4241 for other similar drill bit. Suitable for most metal, wood and plastics Titanium coated for wear resistance and reduced friction. Masonry bits with Tungsten-Carbide tips ensure longer-lasting strength against brick and concrete by breaking up stone and masonry particles. Brad point bit for wood with piercing tips for accurate drilling starts and sharpened edge for easy cutting&churning out.
  • 【WIDE APPLICATION】 All-purpose for use on wood, metal, concrete, masonry, plastic drilling as well as multiple driving and fastening. Ideal for those everyday DIY drilling jobs at home and workshop with a range of drill bits to get the job done quickly and accurately.
  • 【WELL-ORGANIZED】With a side drawer storage box, easy to organize and sort. All accessories are placed in order, no mess.
  • 【Perfect Gift】It is definitely a great Birthday or Christmas gifts for men, father, boyfriend, brother and girls who love DIY.
Check Stock

IRWIN Marples Forstner Bit Set, Wood Drilling, 8 Piece (1966892)

  • Easily drills high-quality flat-bottomed and pocket holes.
  • Features optimized ultra-sharp cutting teeth specifically engineered to cut through hard and soft woods smoothly and efficiently.
  • Significantly reduces cutting time compared with traditional forstner bits.
  • Reduced shank fits 3/8" and larger drills and drill presses.
  • Set includes 1/4" (6.3mm), 3/8" (9.5mm), 1/2" (12.7mm), 5/8" (15.8mm), 3/4" (19.0mm), 7/8" (22.2mm), 1" (25.4mm), 1-3/8" (34.9mm) forstner bits.
Check Stock

MAXTOOL 5/8 Twist Drill Bits with Morse Taper Shank HSS M2 Taper Shank Drill Bits Black Oxide MT No 2 TS02B05R40

  • Quality HSS M2 ensures sharp, fast in any material, offers good hardness, toughness, wear resistance.
  • Premium Heat treated HRC63-66 is durable and can withstand heavy duty operation for a long tool life.
  • Black Oxide Surface holds up lubricant better and lead coolant near the cutting edge for smoother drilling.
  • MT shank allows drills installed directly into the machine's spindle for high-torque applications.
  • The drills confirm to one of ANSI/ASME B94.11M, NAS907, and USCTI standard.
Check Stock

MAXTOOL 3/4 Twist Drill Bits with Morse Taper Shank HSS M2 Taper Shank Drill Bits Black Oxide MT No 2 TS02B05R48

  • Quality HSS M2 ensures sharp, fast in any material, offers good hardness, toughness, wear resistance.
  • Premium Heat treated HRC63-66 is durable and can withstand heavy duty operation for a long tool life.
  • Black Oxide Surface holds up lubricant better and lead coolant near the cutting edge for smoother drilling.
  • MT shank allows drills installed directly into the machine's spindle for high-torque applications.
  • The drills confirm to one of ANSI/ASME B94.11M, NAS907, and USCTI standard.
Check Stock

MAXTOOL 7/8 Twist Drill Bits with Morse Taper Shank HSS M2 Taper Shank Drill Bits Black Oxide MT No 3 TS02B05R56

  • Quality HSS M2 ensures sharp, fast in any material, offers good hardness, toughness, wear resistance.
  • Premium Heat treated HRC63-66 is durable and can withstand heavy duty operation for a long tool life.
  • Black Oxide Surface holds up lubricant better and lead coolant near the cutting edge for smoother drilling.
  • MT shank allows drills installed directly into the machine's spindle for high-torque applications.
  • The drills confirm to one of ANSI/ASME B94.11M, NAS907, and USCTI standard.
Check Stock

MAXTOOL 13/16 Twist Drill Bits with Morse Taper Shank HSS M2 Taper Shank Drill Bits Black Oxide MT No 3 TS02B05R52

  • Quality HSS M2 ensures sharp, fast in any material, offers good hardness, toughness, wear resistance.
  • Premium Heat treated HRC63-66 is durable and can withstand heavy duty operation for a long tool life.
  • Black Oxide Surface holds up lubricant better and lead coolant near the cutting edge for smoother drilling.
  • MT shank allows drills installed directly into the machine's spindle for high-torque applications.
  • The drills confirm to one of ANSI/ASME B94.11M, NAS907, and USCTI standard.
Check Stock

MAXTOOL 11/16 Twist Drill Bits with Morse Taper Shank HSS M2 Taper Shank Drill Bits Black Oxide MT No 2 TS02B05R44

  • Quality HSS M2 ensures sharp, fast in any material, offers good hardness, toughness, wear resistance.
  • Premium Heat treated HRC63-66 is durable and can withstand heavy duty operation for a long tool life.
  • Black Oxide Surface holds up lubricant better and lead coolant near the cutting edge for smoother drilling.
  • MT shank allows drills installed directly into the machine's spindle for high-torque applications.
  • The drills confirm to one of ANSI/ASME B94.11M, NAS907, and USCTI standard.
Check Stock

Chicago Latrobe 190F High-Speed Steel Reduced Shank Drill Bit Set With Stand, Black Oxide, Round Shank with Flats, 118 Degree Split Point, 33-Piece

  • Set of 33 reduced shank drill bits includes inch sizes 1/2″ through 1″ in 1/64″ increments.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material.
  • Self-centering 118-degree split point penetrates material without a pilot hole.
  • Round shank with flats has three flat sides for better tool grip than a standard round shank.
Check Stock

Chicago Latrobe 190F High-Speed Steel Reduced Shank Drill Bit Set With Stand, Black Oxide, Round Shank with Flats, 118 Degree Split Point, 16-Piece

  • Set of 16 reduced shank drill bits includes inch sizes 17/32″ through 1″ in 1/32″ increments.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material.
  • Self-centering 118-degree split point penetrates material without a pilot hole.
  • Round shank with flats has three flat sides for better tool grip than a standard round shank.
Check Stock