ReviewsHss Taper Shank Drill

Sipery 10Pcs M35 Cobalt HSS Twist Drill Bits 4mm with Straight Shank, Drilling for Stainless Steel, Copper, Aluminum Alloy and Softer Materials

Specification – 10Pcs 4mm cobalt drill bits, each kit contains a total of ten drill bits in the same size, Blade length: 43mm/1.7inch, 118 degree point, straight shank..
Material – HSS Cobalt high speed steel for super abrasive resistance in tough metals, improve much higher heat resistance because of cobalt steel’s high red hardness..
Durable – HSS Cobalt Drill Bit provide strong durable performance compared to typical hss drill bits..
Easy to Carry – The twist drill bits are housed in plastic case for easy storage, easy to carry out homework..
Multi-purpose Use – HSS Drill Bits are successful in cutting hard metals such as stainless steel, copper, aluminum alloy, and also can be used for softer materials..

Check Stock

NEIKO 10198A Step Drill Bit Set | 5 Piece, 4mm- 35mm | Metric Titanium High Speed Steel Unibit, Stepper Cone Drill Bit | Two Flute Step Down Bits, 135 Degree Point

135° SPLIT POINT TIP: Each step down drill bit is made with high strength HSS and is black and cobalt-treated for added durability to ensure long service life and longevity. The design of the tip angle increases cutting speed with self-centering and prevents walking off the surface of workpiece..
2 FLUTE DESIGN: This metric stepper drill bit has a two-flute design that clears chips faster, smoother, and allows particles to escape easily making cleaner holes at any worksite..
TRI-FLATTED SHANK: Each unibit optimally fits into power tools such as impact drill chucks securely and eliminates slip for higher efficiency of output..
HSS COBALT STEP BIT: This step up drill bit set cuts through steel, sheet metal, wood, plexiglass, enlarges a hole, and other surfaces creating relatively clean holes with only a small amount of pressure and deburrs as you drill..
MULTIPLE HOLE DRILL BIT: 6 millimeter shank: (9 steps- 4, 5 , 6, 7, 8 ,9 10, 11, 12 mm),(5 steps- 4, 6, 8, 10, 12 mm) and 8mm shank (7 steps- 6, 8, 10, 12, 14, 16, 18 mm),(10 steps- 4, 6, 8, 10, 12, 14, 16, 18, 20, 22mm) and 10mm shank (13 steps- 6, 8, 10, 13, 16, 18, 20, 22, 25, 28, 30, 32, 35 mm)..

Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..

Check Stock

AUTOTOOLHOME 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC

Titanium Combination Drill taps are made of HSS 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
Three in one operation provides hole drilling, tapping, deburring and countersinking for a quick and complete job on copper, brass, aluminum, sheet metal and plastic.
This tap set includes SAE , so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) quick change hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
6pcs drill tap set including SAE- 6-32nc, 8-32nc, 10-24nc, 10-32nc, 12-24nc, 1/4-20nc.
Storage case is lightweight and durable for easy storage and is portable for all job environments.

Check Stock

ATE PROFESSIONAL SOLID COBALT HEX SHANK QUICK CHANGE DRILL BIT SET 32073 13pc

HSS Titanium Coating - Jefe Hex Titanium (TIN) coated Drill Bit can offer 3 times longer life than drill bits without coating..
Hex Shank - 1/4 inch Hex shank can be fit in quick-change chuck easily. And it can transit high torque from power tools to the working part of drill bit. Hex shank also eliminates the frustration of shank spinning in chuck. There is an ENHANCED TAPERED WEB in the drill bit that greatly increases the drill bit's strength and reduces premature breakage..
Accuracy - 135° split point geometry ensures accurate start and reduces walking on the working surface. Solid bonding technology eliminates radial runout and improves concentricity. High torque, Impact-rated..
Multi-Function - Jefe Hex drill bits are built for general purpose applications, such as DIY projects, home maintenance and MRO (Maintenance, Repair and Operations). Ideal for use in steel, copper, aluminum, zinc alloy, cast iron, wood and plastics..
Package & Size - 13 Pieces drill bits in a double blister pack with easy opening design. 135° Split- point, hex shank drill bits..

Check Stock

amoolo Hex Shank Drill Bit Set (16 Pcs), Premium 4341 HSS Titanium Impact Hex Drill Bits for Wood, Steel, Metal, Plastic, Quick Change Design (1/16”-3/8”)

【COMBO SET OF 16 PCS】12 most commonly-used sizes (1/16",5/64",3/32",7/64",1/8",9/64",5/32",3/16",7/32",1/4",5/16",3/8") to satisfy all needs, additional piece of 1/16", 5/64", 3/32" and 1/8"for easy replacement. Total 16 Pcs hex shank twist drill bit set come with a portable plastic case for easy select, storage and carry..
【ADVANCED HSS TITANIUM COATING】Industrial grade 4341 high speed steel drill bits set, harder than 4241 HSS and has stronger cutting capacity. Titanium coating increases wear-resistance and durability..
【FULLY GROUND PROCESS & 135° SPLIT POINT】Fully ground spiral flute discharge scraps quickly, reduce friction and heat, therefore provides a faster, cooler and more efficient drilling performance.
135° Split Point with straight shank prevents slippage and makes drilling stable and precise. No center punch is needed..
【QUICK CHANGE】1/4"(6.4mm) hex shank base well fits into majority pistol drill and drill press, more easily and securely installation without slippage and shedding..
【MULTIPLE APPLICATION】Small Drill bits for wood, plastic, steel plate ≤ 5mm, aluminum alloy and other soft metals..

Check Stock

LANTRO JS MT5 to MT2 Morse Taper Drill, Hardness Wear Resistance Taper Drill Sleeve Reducing Adapter for Lathe Milling

MATERIAL: The taper drill sleeve is made of high-quality high-speed steel, which is hard and not easy to break, bringing you a better experience.
SPECIFICATIONS: Accuracy: 0.015mm, Hardness: 50 HRC.
QUENCHING: The product has been quenched as a whole, which has higher hardness and wear resistance.
APPLICATION: The drill sleeve is specially designed for the use of Morse taper shank and taper shank drill bits.
QUALITY INSPECTION: Each product has been strictly tested before leaving the factory, and rejects defective products.

Check Stock

CaRoller Drill Bit Set 13 Piece Twist Hex Shank Quick Change High Speed Steel Titanium Coating for Metal, Aluminum Alloy and Plastic Wood 1/16' to 1/4'

✔【PREMIUM HSS TITANIUM COATING】Industry grade 4341 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. Titanium coating increases wear-resistance and durability..
✔【FULLY GROUND PROCESS & 135° SPLIT POINT】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° Split Point with straight shank prevents walking and makes drilling precise. No center punch is needed..
✔【Quick Change】1/4 inch hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck..
✔【MULTIPLE APPLICATION】Small Drill bits for soft metal, wood, plastic, steel within 5mm thickness, aluminum alloy and other soft metals. Ideal for DIY projects, household maintenance and repair.NOT for glass, ceramic or concrete drilling..
✔【Specifications】13pcs titanium drill bits set, include 1/16", 564", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4" bit set with 1/4 hex shank..

Check Stock

COMOWARE Impact Screwdriver Bit Set with Titanium Drill Bits - Quick Release Twist Drill Bit Set with Tough Case, Impact Driver Bit Set Total 35Pcs

【Industrial Grade S2 Alloy Steel】 - Our drill bits are made of high quality S2 Alloy Steel in sand blasted finish, with high hardness, high hardness, good wear resistance, which is also resistant to rust. Drill Bits are classic HSS construction with titanium coating for capability and durability. .
【Hex Shank & Quick Change】: Hex shank fit quick-change and lock firmly in standard chucks, suitable for any drill, driver, screw-gun, etc. Great for the DIY, household maintenance, and most general repairs..
【Complete Specifications】A complete set of screwdriver bits and titanium drill bits which is most commonly used. Anytime ready to satisfy your different needs..
【Wide Applications】Our drill bits set can be widely used on electric screwdrivers, hand screwdrivers, cordless drills, electric drills, air drills and so on. The bits are also impact-rated and for use in ¼” hex impact drivers (sold separately)..
【HSS-Ground Titanium Coating】Classic HSS construction with titanium coating to sustain long life. The cutting edge is hardened and honed for drilling accurate and clean holes in metal, wood and plastic, Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer m....

Check Stock

Drill America 5/8'-18 Tap and 37/64' Drill Bit Kit, POU Series

Set contains high speed steel plug hand tap and matching high speed steel drill bit.
High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping.
Black oxide drill bit is ideal for production, maintenance or portable drilling jobs.
5/8"-18 hss plug tap and matching 37/64" hss 1/2" shank drill bit in plastic pouch.

Check Stock

Lichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers

Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..

Check Stock