ReviewsHumidity Control For Ammo

TOPGREENER Dual Tech Humidity Sensor Switch, Infrared PIR Motion & Air Moisture Detection, Bathroom Fan & Light Control, Adjustable Timing, Neutral Wire Required, UL Listed, TDHOS5, White

  • FAN TIMER SWITCH Dual-tech in-wall humidity control switch that controls both bathroom fan and light simultaneously. Dual technology of passive infrared (PIR) motion sensor switch and humidity sensor switch for fan. Automate light and exhaust fan control to keep you hands-free..
  • BATHROOM FAN OCCUPANCY DETECTOR Converts bathroom ventilation fan control wall switch with this smart humidity control switch, turning fan ON automatically when humidity exceeds preset level and turning OFF as it drops to normal to eliminate excess humidity.
  • HUMIDITY SENSOR SWITCH features simple controls and operates in two modes: Occupancy Mode (auto on/off lights, auto on/off fan), and Vacancy Mode (manual on/ auto off lights, auto on/off fan). Adjustable time delay and humidity level.
  • MOTION SENSOR Two single pole switches to control bathroom light and fan separately.
  • Energy savings of up to 40% with motion sensing control.
  • 4 time delay settings from 15 sec to 30 min.
  • 120VAC, 3A fan/motors, 500W incandescent/halogen, 150W CFL/LED.
  • Up to 600 sq.ft coverage, 180 degree field of view.
Check Stock

Pokin 4040 Humidifier Solenoid Valve - Compatible with Aprilaire Valve 400 500 600 700 220 224 Replaces Part B2015-S85 B2017-S85 24V 2.3W 60Hz

  • Control humidity by setting value and differential value.
  • Switch the modes between humidification and dehumidification automatically.
  • Alarm when sensor error or humidity exceeds limit.
  • Alarm when humidity exceeds high/low humidity setting value.
Check Stock

Boveda Wooden Music Instruments - 49% RH 2-Way Humidity Control - Size 8 For Wooden Instruments – Protects All Wood Instruments For Optimal Sound – Prevents Cracking & Warping Of Guitars – 10 Count

  • HOW IT WORKS: Our patented two-way humidity controlled Boveda packs compensate the atmosphere inside your musical instrument. When water vapor is needed, Boveda releases the cleanest and most purified humidity. When there is too much moisture in your musical instrument, Boveda absorbs the excess. Boveda requires zero maintenance, your instrument will always be protected. Wide fluctuations in humidity will cause the wood to expand or shrink, and degrades its performance abilities..
  • IDEAL HUMIDITY FOR WOODEN INSTRUMENTS: Most experts and instrument manufacturers agree that an ideal relative humidity range of 45-50% is best for storing instruments. Stop risking your instrument by adding water or other solutions. Only Boveda’s patented 2-way humidity control adds or removes moisture as conditions require to maintain the ideal humidity level in your instrument case. Boveda helps you protect your sound with the right relative humidity control with any wooden instrument!.
  • EFFORTLESS PROTECTION: Nearly all guitars and other musical instruments made from wood are built in an environment where humidity is closely controlled and monitored. Wood is susceptible to warping that can alter the tone and timbre of the instrument, or even worse, cause it to crack ....
Check Stock

wisedry 2 Way Humidity Control Packs 62% RH - No Leaking 60 Gram x 4 Moisture Packets with Individually Wrapped

  • ✅ - [ 2-WAY PRECISE HUMIDITY CONTROL] - Ingredients made from innovative PLANT-BASED FIBER HUMIDITY-CONTROLLING MATERIAL that provides better....
  • ✅ - [ NO LEAKING ] - Inside each wisedry 2-Way Humidity Control Pack is a solid plant fiber pad instead of any liquids, so there’s no worry....
  • ✅ - [ SAFE DOUBLE PACKAGING ] - An external airtight bag with individually sealed wrappers for each humidity control pack. Prevents unintended....
  • ✅ - [ HOW TO USE ] - Each 60-gram 2-way humidity control pack is able to regulate sealed space of up to 10L. Simply place the packet in your....
  • ✅ - [ LONG LASTING ] - Keeps your stored items at the precise RH level in a wood humidor for up to 3-6 months and a mason jar for up to 1 year,....
Check Stock

Cimidore Large Capacity Travel Cigar Humidors - with Spanish Cedar & Humidifier & Digital Hygrometer. That Can Hold 15-50 Cigars.

  • Humidor SIze:7.0 in.L x 6.8 in.H x 4.9 in.W - Easy Hold 20 - 50 Cigars,Large Capacity Humidor..
  • Tight Seal Design: with Cigar Humidor, Tight Seals Are Everything. This Humidor Uses A Rubber Gasket Seal And Clasp Locking, easy Humidity Control, And Excellent Sealing Performance. Perfect For Cigar Beginners..
  • Travel Humidor Design: large Capacity - Lightweight - With Handle And Can Easily Portable Cigar Humidor Can Easy Carried Around Your Cigar Anywhere..
  • Handmade Two Spanish Cedar Planks: Two Compartments Prevent The Flavors Of Different Cigars From Being Spoiled. Spanish Cedar Can Better Control Humidity And Add Flavor To The Cigar..
  • Humidity System Of The Cigar Holder: includes All Humidity Control Accessories And an Accurate Electronic Hygrometer. make Cigars Easy To Store In Compliance With The 70/70 Principle（70% RH (Relative Humidity) at 70 degrees Fahrenheit）. novices Can Also Control Humidity And Protect Your Cigar Investment..
Check Stock

PETSPIONEER Temperature & Humidity Controller Reptile Timer Dual Stage Outlet Reptile Humidity Controller Heat Thermostat with Heating & Cooling Mode Day & Night Use

  • This device works as temperature controller, humidity controller and timer for reptile plant breeding. The temperature controller is suitable for....
  • The temperature and humidity controller can quickly switch to tropical mode or desert mode for beginners with the “One Click” setting function.....
  • Temperature control range is 0-50°F(32-122℉), humidity display range is 10 -99.0%RH. Both the temperature and humidity probe connectors can be....
  • 3 output sockets for monitoring and control of temperature, humidity and time simultaneously. The integrated design adopting multiple control in....
  • This reptile heat thermostat & humidity controller is widely used for mushroom, mini greenhouse, ventilator fan, crawl space, turtle enclosure, curing....
Check Stock

Boveda 62% & 72% Humidor Starter Kit - RH 2-Way Humidity Control – Restores & Maintains Humidity – All in One Humidor Bundle – Patented Technology for Cigar Humidors – Convenient & Versatile -14 Count

  • ALL IN ONE HUMIDOR STARTER KIT: The Boveda Starter Kit is the perfect way to start using our patented humidity control technology. The kit contains everything you need to get started. It comes complete with everything you need to maintain the perfect humidity level for your cigars, including humidifier packs that adds or removes moisture as needed. Simply place the Boveda packet in your travel, desktop, electronic, or wooden humidor right on top of your cigars or use our Boveda Holder..
  • HOW IT WORKS: Our patented two-way humidity controlled Boveda packs compensate the atmosphere inside your humidor. When water vapor is needed, Boveda releases the cleanest and most purified humidity. When there is too much moisture in your humidor, Boveda absorbs the excess. With Boveda, you do not have to adjust any valves or figure out if you put in too much or too little water and you will never have to fill or refill your device with water again - ever..
  • MAINTAIN PRECISE HUMIDITY CONTROL: The Boveda Starter Kit is the most effective and easiest way to maintain humidity in your cigar humidor. Simply place a Boveda packet in your travel, desktop or wooden humidor right on top of your cigars, and they will automatically restore and maintain the ideal humidity for you. ....
Check Stock

Inkbird Digital Temperature Probe Controller ITC608T Thermostat 120V 15A 1800W Pre Wired AC Dual Stage Outlet 12 Period Timer Stage

  • US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.).
  • Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • Multifunctional usage. Temperature and humi....
Check Stock

Elitech STC-1000Pro TH Temperature Humidity Controller Thermostat Pre-Wired Outlets 110V 1200W

  • 【Wide Control Range】Temperature & humidity 2 in 1 Sensor.
  • Temperature control range 23℉～158℉, humidity control range 5%RH～99%RH. It starts cooling or heating.
  • humidifying or dehumidifying according to configured parameters, which helps to keep a desired temperature/humidity anytime..
  • 【No Wiring】Its large LCD screen, simple 3-button, and pre-wired design making it easier for use with plug and play..
  • 【Dual Relay Output】Be able to connect two types of equipments at the same time, work1 for temperature controlling.
  • 【Multi-functional Setting】Its functions include high or low alarms, start delay, temperature or humidity calibration, Temperature unit ℃/℉ and continuous working time for humidity..
  • 【Safe & Reliable】Comply with CE, FCC, WEEE standard and adopt fireproof ABS case for safety when in use. Flame Retardant UL94 V-0. 24/7 US Technician Support via Email and Phone..
Check Stock

Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

  • US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety..
  • Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
Check Stock

Inkbird Temperature Controller ITC-608T Pre-Wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed Homebrew Reptile Breed

  • ????????US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety..
  • ????????Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • ????????Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • ????????More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • ????????Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fe....
Check Stock