ReviewsHvac Fittings

Vent Systems 4" Metal Tee Cap. Galvanized Steel End Cap. Dryer Vent Cover. Dryer Duct End Cap. 4In Steel End Cap. Steel Plug 4Inch. Round Metal Duct Fitting. Reusable. 100mm

The cap is used at the end of tubing as a cover to fit over pipe fittings.
Easy to install - push-fit end plug/cap in the duct. fix with clamp, alu-tape or rivets..
Durable Material: Made of High Quality Metal and is rust free. Fits perfectly with other Vent Systems HVAC products..
Vent Systems products are made to be used for home improvement, office improvement. They are portable, high quality and long durability..

Check Stock

Orion Motor Tech Vacuum Chamber with 3.5cfm Pump, 1.5 Gallon Vacuum Chamber Kit and 38 Micron Vacuum Pump Epoxy Resin Kit, 5.7L Vacuum Chamber with Pump for Casting Degassing, Oil Incl.

...chamber set comes with the system's necessary lubricating and absorptive oil included, as well as a funnel and one-size-fits-most gloves for quick and clean replacement.
an adapter allows use of the pump with 1/4", 3/8", or 1/2" HVAC hoses as needed.
and a 5 ft. reinforced wire hose and various gaskets, filters and fittings provide a reliable connection between pump and chamber.
SATISFACTION GUARANTEED: Order today and get right to work processing your solvents with this vacuum chamber and pump set, protected by its strong 1 year warranty and helped along by the clear instructions and Orion Motor Tech's friendly 24/7 customer service!.

Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1/2inch50ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,1/2 in Dia

【PREMIUM Liquid-Tight Conduit】- Length:50"，ID：1/2inch，OD：0.83inch，Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical....
【Complete Accessories】-1/2-Inch 50 Foot Flexible Electrical Conduit with 5 Straight and 390-Degree Conduit Connector Fittings.
【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....

Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,3/4inch 25ft Electrical Conduit Kit,with 5 Straight and 3 Angle Fittings Included,3/4 in Dia

【PREMIUM Liquid-Tight Conduit】- Length :25'，ID：3/4inch，OD：1inch，Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical Conduit....
【Complete Accessories】-3/4-Inch 25Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....

Check Stock

Liquid-Tight Conduit and Connector Kit,Flexible Non Metallic Liquid Tight Electrical Conduit,1inch50ft Electrical Conduit Kit,with5 Straight and3 Angle Fittings Included,1 in Dia 50FT

【PREMIUM Liquid-Tight Conduit】- Length :50'，ID：1inch，OD：1.22inch， The Flexible Non Metallic Liquid Tight Electrical Conduit kit is....
【Complete Accessories】-1-Inch 50Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.
【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....

Check Stock

Screwdriver, 14-in-1 Adjustable Screwdriver with Flip Socket, HVAC Nut Drivers and Bits, Impact Rated Klein Tools 32304

14 in 1 HVAC Adjustable Length Impact Screwdriver Flip Sock.

Check Stock

Masks and Duct Tape [Explicit]

NOT made in labor camps! 100% Made in USA! Self-adhesive vent duct protection film protects HVAC ducts and vents from dirt and dust and contaminents..
Blue HVAC Protection Film provides U.V. protection and is tinted light blue for high visibility..
Vent, Duct & HVAC protection film that's easy to install and remove. High tear and puncture resistance vent duct cover shield..
Vent HVAC protection film leaves no residue behind. Vent Duct Register protection film completely made in the USA..
Vent Duct Register HVAC protective plastic film meets SMACNA guidelines for providing temporary closures on open ductwork and can be used as part of the LEED EQ 3.1 Construction IAQ Management Plan..

Check Stock

Refrigerant Charging Hose with Ball Valve Apply to R134A R12 R22 R502 R404 Refrigerant Air Conditioning Manifold Gauge 1/4 Thread Hose Set 60 Red/Yellow/Blue Pack of 3

60 inch long,1/4 inch yellow,blue,and red hoses feature a 600 PSI working pressure and 3000 PSI burst pressure - ideal for standard refrigerants.
Easy to operate and install,strong sealing for durability and safety.Necessary tools for HVAC,car air condition maintenance and coolant or Freon....
refrigerant charging hose with compact ball valve deigned to meet 1/4" SAE requirement for refrigerant permutation, fit most refrigerants like R134A,....
refrigerant anti blowback fittings refrigeration charging hoses valve discharge conditioning refrigerant charging refrigerant discharge recharge....
100% satisfactory service, if you have any questions, please feel free to contact us by email!We will solve it for you in the first time!.

Check Stock

Fluke 116 HVAC Multimeter, Standard

Built in thermometer for HVAC applications.
LoZ: helps prevent false readings due to ghost voltage.
Large white LED backlight to work in poorly lit areas.
Resistance, continuity, frequency and capacitanceDescriptionFor the complete solution to HVAC troubleshooting the extra value-packed HVAC Technician's Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case..

Check Stock

How to Setup Your Guitar Like a Pro: An Easy Guide for Beginners

...l not easily break. The refrigerant gauge is also equipped with 3 standard test hoses (1.5m) and a portable toolbox, which is convenient for the storage and carrying of the meter..
2.【Refrigeration Gauges for Double Pressure and Dual Temperature Measurement】The digital HVAC gauges can measure double pressure (gauge pressure) at the same time, as well as dual temperature measurement, with automatic multi-unit pressure conversion, automatic conversion of temperature Celsius / Fahrenheit, to facilitate different needs. Note: Please make sure that the temperature sensor clip is properly connected. A poor connection will result in an inaccurate reading of the value..
3.【HVAC Gauges with High-Precision Data Unit and Refrigerant Database】The HVAC manifold gauge built-in 32-bit digital processing unit and a high-precision data acquisition unit, high data and stability. The a/c manifold gauge set built-in 89 kinds of refrigerant pressure-evaporation temperature database, also calculate the subcooling superheat, to facilitate the direct reading of operating process data. Also, it tests the percentage of vacuum measurement..

Check Stock

iCrimp Copper Tubing Cutter, 3/16-inch to 1-1/4-inch Tube Cutter, for Stainless Steel, CSST Tubing Cutter with 2 Pack Replacement Blades

Metallic Tubing Cutter: CT-532 pipe and tubing cutter is designed for cutting copper, brass, aluminium, thin-walled steel, 5-32mm(3/16’’ to 1-1/4’’). Made from aluminum alloy and Wear-resistant steel blades ensures a durable and sturdy usage.Ergonomic knob reduce fatigue..
Neat Cutting: This pipe cutter makes fast, easy cuts in standard pipes. With clean, no burrs and smooth cuts on copper tubes and corrugated stainless steel tubing without deforming the peaks of corrugations..
Smooth Operation: Professional Tubing Cutter features an accurate 6-roller tracking system. This keeps the tube from threading and helps eliminate spiraling. The rollers and the blade utilize ball bearings for smoother action on thin stainless steel, all soft tubes like aluminum, copper, and PVC..
Free Cutter Wheel: Replacement blade is constructed with high carbon steel for long life. Precision grinding delivers a sharp cutting edge. Optimized for cutting copper tubing..
Applications: Perfect for industrial plumbing, HVAC applications, this pipe cutter high grade cast malleable steel frame and hardened alloy steel rollers for added durability. Also ideal for installation of Sharkbite Push to Connector fittings when creating copper tubing diversions..

Check Stock