ReviewsHy gard Transmission And Hydraulic Oil

Motul Multi DCTF - Dual Clutch Transmission Fluid (Pack of 6)

  • Dual clutch transmission oil 8100 is especially also suited for dual clutch transmissions equipped with a shared oil supply for clutch, synchronization, gear set and hydraulic control.
  • Specially developed for use in dual-clutch transmissions (DCT transmissions) in vehicles made by Audi and the VW Group.
  • Usage according to the prescribed specific cations from the unit or vehicle manufacturer.
Check Stock

Liqui Moly 20116 Dual Clutch Gear Oil (8100), 5 l, 1 Pack

  • Dual clutch transmission oil 8100 is especially also suited for dual clutch transmissions equipped with a shared oil supply for clutch, synchronization, gear set and hydraulic control.
  • Specially developed for use in dual-clutch transmissions (DCT transmissions) in vehicles made by Audi and the VW Group.
  • Usage according to the prescribed specific cations from the unit or vehicle manufacturer.
Check Stock

AmazonCommercial Air Operated Pneumatic Oil Transfer Pump Heavy Duty Double Action 3:1 3.2GPM / 12LPM for SAE130 Oils/Fluids (NOT for Gasoline or Diesel)

  • Heavy-duty pneumatic (air-operated) 3:1 double-action oil transfer pump for medium- to high-viscosity fluids and short- to medium-distance applications.
  • Provides a high flow rate of up to 3.2GPM (12LPM).
  • suitable for SAE130 oils/fluids, including motor oil, synthetic hydraulic oil, gear oil, hydraulic fluid, and automatic transmission fluid (NOT for use with gasoline or diesel).
  • Air inlet connection of 1/4-inch and oil outlet connection of 3/4-inch male.
  • maximum air inlet pressure of 5-8BAR / 70-115PSI.
  • maximum fluid pressure of 24BAR / 350PSI.
  • Long pumping life of 221k+ gallons (840k L).
  • minimal moving parts in the air motor assembly translate to less downtime and lower repair costs.
  • corrosion-resistant design uses stainless steel, aluminum, and chrome on key components for longer life.
  • 2-inch adjustable bung adapter for easy installation.
  • can be barrel, cart, or wall mounted (wall mount kit or extension tub kit sold separately).
  • backed by an AmazonCommercial 1-year limited warranty.
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

GZYF 1100LBS 2 Stage Hydraulic Transmission Jack w/ 360 Degree Swivel Wheels Telescopic Lift Hoist

  • Foot-operated pump and lowering pedal for hands-free rising of the ram, allow mechanic to position and align the transmission.
  • Two 31" long safety chains for securing the transmission on the saddle.
  • Telescopic 2-stage hydraulic ram for greater lift range.
  • Features fully adjustable saddle with corner brackets.
  • Universal hydraulic transmission jack, Applied for most automotive or light truck transmission installation or removal..
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Double Flaring Tool Brake Repair Brake Flaring Tools for 3/16 -1/2 Brake Flare Tool with Tube Cutter and Deburrer 32 PCS Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with a 45° flaring cone and φ 3/16 - 1/2 inch expanding dies and adapters, including, push connects, GM fuel lines, GM transmission cooling line, 45° and double flares, ISO bubble flares..
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a pressure relief valve and no-leakage oil cylinder. You can easily operate this tool without effort..
  • Pipe Cutting & Deburring: The double flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging from 1/8" -5/8" quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a plastic toolbox, reducing the possibility of missing parts. It is compact and easy to carry..
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper piping. It is an excellent tool for repairs on vehicles or making lines off a vehicle, ideal for the refrigeration and ai....
Check Stock

Johnsen's 5594 Hydraulic Jack Oil - 32 oz.

  • STA-LUBE: Sta-Lube offers a range of high performance industrial greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Our products have been rigorously tested to meet the highest quality standards..
  • HYDRAULIC & JACK OIL: Our formula is a medium weight hydraulic oil blended of a high quality paraffinic base oil with anti-rust, anti-oxidation, anti-foam, anti-wear, and seal swell additives..
  • FORMULATION: This oil is a 20W, non-detergent oil that is compatible with all hydraulic fluids, and protects all parts in hydraulic jacks over a wide temperature range..
  • APPLICATIONS: Our hydraulic oil can be used for hydraulic systems and fluid drive units, and added to existing fluids. However, it is not suggested for use in hydraulic brakes..
  • PRODUCT SPECIFICATIONS: Available in a 32 fl. oz. or 1 qt bottle, and is made in the USA..
Check Stock

Mophorn Air Hydraulic Pump 10000 PSI 1/2 Gal Reservoir Hydraulic Foot Pump Air Treadle Foot Actuated for Auto Body Frame Machines and Pulling Post

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic Inches / 1.6 Liters(1600 cc), Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality metal shell to handle tough industrial applications. 1.6L oil tank has a larger capacity with 98 cubic inches / 1.6 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Durable Oil Pipe Included: This hydraulic air pump is equipped with a 1 m /3 ft high-pressure oil pipe that f....
Check Stock

Prolong Super Lubricants PSL10020 Anti-Friction Metal Treatment, 1 Gallon

  • Works with all brands of synthetic and petroleum-based oils. Including full synthetic, semi- synthetic, conventional, and mineral. Gas or Diesel engines..
  • Recommended to be used in all automobile, truck, lawn, marine, agriculture and heavy-duty equipment..
  • Increases horsepower, lowers operating temperatures and reduces engine noise and vibration in all engines..
  • USAGE: Use 2 ounces per quart of oil in crankcases, 3 ounces for heavy duty and towing applications. Transmissions (Automatic or Manual) Use 1 ounce per quart of transmission fluid. Differentials use 1 ounce per quart of differential fluid. Power steering systems use 1 ounce per quart of fluid. Hydraulic fluid 1 ounce per 2.5 gallons of hydraulic fluid. Motorcycles 1 ounce per quart of fluid max. Lasts multiple fluid changes but maybe used more frequently for best results..
Check Stock

Byredio 3/8 Fuel Line Braided 6AN 10ft Transmission Cooler Hose for Oil,Gas,Fuel,Hydraulic 350-1400 psi High Pressure & Tamper Resistant (8.71mm ID)

  • ... ✅NYLON BRAIDED - The braided fuel line can stand-104ºF to +302 ºF/-40ºC to +150ºC, 350 PSI Working Pressure Tolerance, the fuel line has good retardancy and excellent corrosion resistance.Best for the brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect...
  • ✅WIDE APPLICATION - The 6an fuel line specially designed to compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85..
  • ✅CUT THE SIZE AS YOU WANT - The 6an fuel line is 10 Feet / 3 m, can be cut to size for all your applications. Our braided fuel line is also an excellent alternative to conventional fuel lines, the 6an hose can be applied to higher-intensity temperature and pressure environments. Oil resistant, cold-resistant, and ethanol tolerance..
  • ✅FLEXIBILITY - The highlight of this fuel line is its sublime pliability. Steel, aluminum, or plastic lines will not bend as easily as this tube. The superior bending ability of this fuel tube makes i....
Check Stock

VEVOR 2510A Air Hydraulic Pump 10,000 PSI Quick Power Air Hydraulic Foot Pump 1/2 Gal Reservoir Foot Actuated Hydraulic Pump for Heavy Machinery Rigging & Auto Repair

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 103 cubic inches / 1.7 liters(1700 cc), 0.45 gallons, Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features a high-quality aviation aluminum pump core and shell to handle tough industrial applications. 1.6L ± 0.1L oil tank has a larger capacity with 103 cubic inches / 1.7 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Durable Oil Pipe Included: This hydraulic air pump is equipped with a 6.5 ft / 2 m high-pressu....
Check Stock