ReviewsHydaulic Cylinder

Mophorn Complete Cylinder Head for 85-95 22R 22RE 22RE 2.4L SOHC Pickup 4Runner Speed

  • Perfectly Suited: This cylinder head perfectly fits the 1985-1995 Toyota 4Runner 2.4L SOHC 8v 4Cyl, 1985 Toyota Celica 2.4L SOHC 8v 4Cyl, 1985-1995 Toyota Pickup 2.4L SOHC 8v 4Cyl, Volkswagen 2005-2010 Jetta, 2012-2014 Beetle, 2006-2009 Rabbit..
  • Robust Iron Structure: Built from industrial-grade cast iron, our cylinder head is tolerant to the extreme pressure generated inside cylinders and resistant to high temperatures and abrasion. Give up disappointing cylinders, and we got what you are looking for..
  • Highly Stable ＆ More Efficient: These are nothing like those ordinary cylinder heads that bring you dissatisfaction. Ours features fantastic performance. Add this cylinder head to your engine, and drive at lower noise with a higher power transfer efficiency..
  • Fully assembled ＆ Tested: All our cylinder heads have been fully assembled, carefully packed, and are waiting to get into your hands. Replace your cylinder heads and start to experience the smooth ride you have been missing out on..
  • Widely Used: As a quality cylinder head, this has been used on lots of Toyota 2.4L SOHC 22R 22RE 22REC engines. Replace your old malfunctioning cylinder head with our newly improved one, and you will feel your engine running smoothly like never before..
Check Stock

SP Bel-Art Frigimat Junior Dry Ice Maker; U.S. Model (F38886-0000))

  • Attach to a liquid CO2 cylinder equipped with a dip tube to produce a ready-to-use 250 to 350 gram block of dry ice in only a few minutes.
  • each 50lb. cylinder makes from 10-16 blocks of dry ice.
  • Dry ice production can be viewed through the transparent polycarbonate body that secures without clamps, screws or tools ensuring easy removal of the solid block of dry ice and disconnection from the CO2 cylinder.
  • Lightweight body is never as cold as the dry ice, even when filled.
  • allows safe transport of the unit and contents when wearing appropriate gloves. Rugged nickel-plated "pigtail" connects it to the CO2 cylinder valve which is used to regulate gas flow.
  • Includes a 1.8m (6ft) nickel-plated copper connecting tube with standard CGA 320 thread coupling for easy attachment to a LCO2 cylinder.
  • Read through Instruction Manual (PDF) under Technical Specification before installation.
  • allows safe transport of the unit and contents when wearing appropriate gloves. Rugged nickel-plated "pigtail" connects it to....
Check Stock

Square D 135-175 PSI Air Compressor Pressure Switch Control Valve 9013FHG42J59M1X

  • It is recommended on Twin Cylinder Air Compressor Pumps that both cylinder sleeves and piston rings be replaced at the same time so that the air compressor pump will produce equal air output and not be out of balance..
  • Features:The K-0650 Cylinder and Piston Ring Replacement Kit fits many model Oil-Free air compressors.
  • This K-0650 Cylinder and Piston Ring Replacement kit will fit both the single cylinder oil-free pumps and the twin cylinder oil-free pump made by DeVilbiss, Porter Cable, Sears Craftsman,DeWalt, Snap On, Ex-Cell, Air America, Charge Air Pro, Grainger, Stanley Black and Decker and many other privately labeled air compressors..
  • Package including: 1 x Air Compressor Cylinder & Ring Kit (As Picture Show ).
  • Aftermarket Product,Any product questions can be contacted by email, and the customer service team will reply to you within 24 hours..
Check Stock

NICHE 660cc Big Bore 9.1:1 Compression Cylinder Kit for 2001-2008 Yamaha Grizzly and Rhino 660

  • Fits 2002-2008 Yamaha Grizzly 660, Fits 2004-2007 Yamaha Rhino 660.
  • Replaces OEM: 5KM-11310-00-00, 2C6-11631-00-X0, 3YF-11631-00-X0, 2C6-11603-10-00, 3YF-11633-01-00, 93450-24028-00.
  • Also replaces OEM: 93211-01467-00, 5KM-11351-00-00, 3YF-11351-00-00, 3YF-11181-00-00, 90105-10649-00, 90105-10650-00, 90105-09648-00, 90201-102G9-00, DPR-8EA90-00-00.
  • Includes: (1) Cylinder, (1) Cylinder Head with built in spark plug, (4) Cylinder Stud Washers, (2) Short Cylinder Studs, (2) Long Cylinder Studs, (1) Head Gasket, (1) Base Gasket, (1) O-Ring, (1).
  • Cylinder Bore and Stroke of 100.0mm x 84.00mm.
Check Stock

Birds Choice SCF-Clear Bird Cylinder Seed Cake Feeder, Medium

  • The scalloped design protects the seed cylinder.
  • The bottom catches parts of the cylinder as the wild birds peck off pieces.
  • The hanging pole and seed cake are not included.
  • Clear Cylinder Feeder are a great way to feed your birds any seed or suet cylinder in our clear cylinder feeder.
Check Stock

DAJAVE 2 Pack 5.5 Inch Office Chair Cylinder Replacement, Office Chair Gas Lift Cylinder, Hydraulic Pneumatic Shock Piston Heavy Duty(1000lbs) Universal Size Fits Most Executive Chairs

  • [2Pcs Gas Lift Cylinders] You will get 2 office chair cylinder replacement to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a new computer chair.
  • This hydraulic piston is suitable for almost all office chairs (salon chairs, work chairs, executive chairs, rolling stools)..
  • [1000lbs Office Chair Cylinder] The office chair piston maximum weight it supports is 1000Lbs, which is much heavier than an ordinary gas cylinder for office chair..
  • [11.8" to 17.4" Long Adjustable Gas Lift Cylinder] Minimum length: 11.8 inches.
  • maximum length when fully extended: 17.4 inches.
  • adjustable range: 5.5 inches, Load capacity: 1000lbs.
  • Office Chair Cylinder Replacement: Full 360 degree rotation, smooth and noiseless movements to all directions. You can use this chair cylinder replacement for your office chair, gaming chair, desk chair and swivel chair etc..
  • Easy To install: This office chair cylinder is relatively simple to install,and can be installed easily with no additional screws required..
Check Stock

Yosoo123 38mm Engine Cylinder Piston Crankshaft Assembly for MS170 MS180 018 Chainsaw, Chainsaw Cylinder Assembly Chainsaw Cylinder Kit Chainsaw Cylinder

  • The Cylinder Size: Approx. 13.5 * 13 * 8cm / 5.31 * 5.12 * 3.15in..
  • The Package Weight of Chainsaw Cylinder Assembly: Approx. 938g..
  • The Material of Chainsaw Cylinder Kit: Metal construction for long service time..
  • The Cylinder Piston Crankshaf fits for MS170 MS180 018 Chainsaw perfectly..
  • Comes with cylinder, crankshaft, il seal, crankshaft bearing..
Check Stock

1- Black Cigar Ashtray Ash2Cigar-1

  • What you will get: you will receive 2 black car cylinder with lid, sufficient quantity to meet your daily needs.
  • Good quality: auto cylinder for car is constructed out of quality material to provide you with a sturdy and durable tray, fits most car cup holder.
  • Cool blue light design: cool blue light will be lighten when open, when you lift the lid, the car cylinder cool blue LED light up.
  • Convenient to install: you only need to fix the car cylinder with 2 fixing clips, it can remain stable when driving, car cylinder help remove odors....
  • Versatile application: the portable cylinder is ideal for office, home and car use.
  • It is also can be a mini trash can and easy to carry with compact....
Check Stock

Ambienceo 26” 28” Black 2 Stroke 50cc 80cc Cycle Bicycle Gas Motorized Gasoline Engine Motor Kit CDI Air Cooling For Mountain and Road Bike 80cc Silver

  • CDHPOWER LD90 Cylinder Body w/Piston Kit.
  • Compatible with bottom end of all brand 2 stroke gas motor kit 66cc/80cc/pk80/LD80/LD90 including other....
  • New pk80 upgraded cylinder with piston kit, the piston kit is installed well inside of cylinder already.Excluding cylinder head..
  • Cylinder head gasket and cylinder body gasket are included.
  • The LD90 Cylinder Body and piston kit can be replacement of most 2-stroke gas motor engine such as pk80/LD80/LD90.
  • piston pin:10mmx39mm.This is a high hole piston for a 40mm stroke but with 48mm bore..
Check Stock

Motorcycle Cylinder Head Cover Guard CNC Aluminum For Raptor 700 2006-2021 Raptor 700R 2009-2021 ATV Transparent Paragraph

  • Fitment: The Cylinder Head Cover For Raptor 700 2006-2021 Raptor 700R 2009-2021..
  • Material: The Cylinder Head Cover Is Made Of Aluminum Alloy, It Has Good Corrosion Resistance And Is Stronger Than Ordinary Cylinder Head Cover..
  • Process: The Cylinder Head Cover Is CNC Processing, Light And Strong, The Surface Is Anodized, The Appearance Color Is More Gorgeous, Without Losing The Sense Of Fashion..
  • Function: The Cylinder Head Cover Can Play A Good Role In Sealing And dustproofing，And Can Also Protect The Cylinder From The Damage Of Objects Such As Gravel..
  • Replace OEM Part Number: 1S3-11185-10-00..
Check Stock

Distributor Cap Rotor and Spark Plug Wires Set - Ignition Tune-Up Kit - Compatible with 1984-1996 Ford F-150 4.9L 6-Cylinder

  • Compatible with or fits: (Note: Tall Cap) 1984 - 1986, 1996 Ford F-150 4.9L 6-Cylinder.
  • Compatible with or fits: 1995 Ford F-150 Special 4.9L 6-Cylinder.
  • Compatible with or fits: 1995 Ford F-150 Eddie Bauer 4.9L 6-Cylinder.
  • Compatible with or fits: 1993 - 1995 Ford F-150 XL 4.9L 6-Cylinder.
  • Compatible with or fits: 1993 - 1995 Ford F-150 XLT 4.9L 6-Cylinder | 1987 - 1992, 1996 Ford F-150 4.9L 6-Cylinder.
Check Stock