ReviewsHydraulic Bale Press

Hydraulic Fruit Wine Press - Electricity-Free/Water-powered Cider Wine Bladder Press Natural Juice Making 10.7 Gallon with Filter Bag/Splash Guard

  • ...ormal domestic water supply and turn the tap on. The tap water expands the rubber diaphragm inside the press and presses the ground fruit against the mesh basket. The pressure and pressing time can be regulated by turning on the tap more or less..
  • Easier to Use - Simply grind fruit, grapes or berries and fill up the hydraulic press, turn the tap on and watch as the pressure of the incoming tap water compresses the ground material from the inside to the outside against the mesh basket.(Supplied with 1 pack filter bag and splash guard against splash water).
  • Multifunction Hydraulic Press - This Bladder presses are suitable for pressing juice from pre-shredded apples, grapes, red currants and many other fruits, vegetables and berries. It can also be used for pressing rhubarb, honeycomb, tomatoes, macerated tobacco or citrus fruit..
  • HIGH JUICE YIELD/LESS WASTE - The rapid pressing and the short flow distance preserve the vitamins.
  • the juice has a wonderfully fresh aroma. Due to the high pressure applied, you achieve an exceptionally high juice yield, even if the press basket is only partially filled..
  • Advantages:Much quicker than a traditional press/Easier to clean/Less oxidation of juice/Less effort as the water does all the work/Works off a standard mains t....
Check Stock

SWAG Off Road 20 TON Finger Brake Heavy Duty DIY Builder Kit

  • Attach to Most Standard 12-Ton or 20-Ton Hydraulic Shop....
  • Upper Die Mounting Cup Inside Diameter: 41....
  • Overall Dimensions: 14.50 in. Wide x 7.50 in. Deep x 9.25 in. High JEGS 81492 Press Break Attachment for 12-Ton or 20-Ton hydraulic shop presses makes....
  • Bends mild steel and aluminum with a maximum width of 12 in. and thickness of 3/8....
Check Stock

YUEWO 5.8Gal/22Litres Stainless Steel Still Wine Making Kit Water Distiller Home Brewing Kit for DIY Whisky Wine Brandy Gin Vodka Alcohol (Produce 92% ABV)

  • ...ormal domestic water supply and turn the tap on. The tap water expands the rubber diaphragm inside the press and presses the ground fruit against the mesh basket. The pressure and pressing time can be regulated by turning on the tap more or less..
  • Easier to Use - Simply grind fruit, grapes or berries and fill up the hydraulic press, turn the tap on and watch as the pressure of the incoming tap water compresses the ground material from the inside to the outside against the mesh basket.(Supplied with 1 pack filter bag and splash guard against splash water).
  • Multifunction Hydraulic Press - This Bladder presses are suitable for pressing juice from pre-shredded apples, grapes, red currants and many other fruits, vegetables and berries. It can also be used for pressing rhubarb, honeycomb, tomatoes, macerated tobacco or citrus fruit..
  • HIGH JUICE YIELD/LESS WASTE - The rapid pressing and the short flow distance preserve the vitamins.
  • the juice has a wonderfully fresh aroma. Due to the high pressure applied, you achieve an exceptionally high juice yield, even if the press basket is only partially filled..
  • Advantages:Much quicker than a traditional press/Easier to clean/Less oxidation of juice/Less effort as the water does all the work/Works off a standard mains t....
Check Stock

Mophorn Hydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set for Barbed and Beaded Hose Fittings

  • Durable Crimping Tool: Our crimper is made of aluminum alloy material, ensuring its durability. Stamper hardness can reach up to 53 HRC to bear a....
  • Integral Hydraulic: This hand-held integral hydraulic press A/C hose crimper is made for easy use. The hydraulic tool is designed with exquisite....
  • Instant Setup: Our hydraulic crimper can be installed according to the following steps: First, select the correct die to insert, insert the pin, then....
  • Lightweight & Compact: One-person operation saves your time and energy. Besides, the crimping tool kit is stored in a plastic toolbox, reducing the....
  • Wide Application: The crimping tool has a base that can be mounted to a bench for easy use, or the base can be held by any vise. It is compatible with....
Check Stock

Knob for Bottle Jack Valve Release Screw On Harbor Freight Hydraulic Press Made of 6061 Aluminum (3/8\)

  • hydraulic jack valve release screw knob comes in two sizes to either the jack screw with a 3/8" and 7/18" diameter valve release screw.
  • It is machined from a solid bar of 6061 aircraft quality aluminum, The knob also has a longer knurled section ,for extra grip..
  • It slides on over the release screw, turns 1/4 turn then secured in place with a set screw (included) from the end of the knob. You will need to use a 5/32 hex key (Allen wrench).
  • This particular part is designed for the Harbor Freight Hydraulic Bottle Jack used in the 6, 12 & 20 ton arbor presses but will work on any bottle jack with a 3/8 and 7/18" diameter valve release screw having a.
  • DO NOT USE WHEN LIFTING VEHICLES: ONLY TO BE USED ON HYDRAULIC PRESS APPLICATIONS!.
Check Stock

Standlee Hay Company 1200-20021-0-0 Timothy Bale 50 lb Red

  • Great for using around the farm or stable.
  • Timothy Grab N Go Compressed Bale Of Forage.
Check Stock

Muddy Hunting Outdoors Heavy-Duty Water-Resistant Spacious Easy Access Low-Noise Bale Ground Blind

  • PERFECT FOR SURROUNDINGS WITH BALES - The Bale blind from Muddy Outdoors is sure to blend into its surroundings, especially in areas where hay bales are prevalent.
  • HIGH-QUALITY CONSTRUCTION - Built out of a steel frame and a high quality blind cover with a silent slider window system, this blind is built to last with the serious hunter in mind.
  • WINDOWS - Windows are reversible, with burlap on one side and black on the other.
  • this blind features large zippered door with window, 4 windows 6” wide x 16” tall.
  • BALE BLIND SPECS - Dimensions: 82” wide x 64” long shooting width x 73” standing height.
  • Height to bottom of windows: 32” (all sides).
  • Waterfowl opening: 64” wide x 27” tall, one-hand use.
  • Window securing: removable, adjustable bungees to slide windows.
  • RELIABLE HUNTING - Muddy Bale Blind give you the confidence to set up your blind and leave it for days without worry, allowing your blind to become one with the surrounding habitat.
Check Stock

Electric 50 Ton Hydraulic Shop Press Brake Bender Bending 3 Phase 220 Volt

  • Cylinder Max Pressure 25MPA,TONNAGE: 502 KN.
  • Worktable Size: 13-1/2" x 30-1/2" x 1-1/8".
  • Overall dimension: 50" x 20" x 66-1/2" (crate: 59" x26" x 78") *estimate only*.
  • Weight G.W. / N.W. : 1,529 lbs / 1,372 lbs *estimate only*.
Check Stock

Fisher-Price Little People Hay Stackin' Stable Playset

  • close the barn door or spin the horse to activate 10+ songs, phrases &.
  • Includes stable playset, Sofie, horse &.
  • Little People figures are kid-sized – perfect for kid-sized hands!.
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock

TTC 1/4\ C HSS Keyway Broach w/Shim

  • Specialty tools designed for cutting keyways in machined holes..
  • Typically used manually with an arbor press or hydraulic press to produce the keyways..
  • Well suited for use in a variety of ferrous and non-ferrous materials..
  • Hardened and ground bars with cutting teeth on one side..
  • Broach is tapered, allowing teeth to cut keyway to proper depth..
Check Stock