ReviewsHydraulic Bearing

SKF TMMA 75H EasyPull Hydraulic Puller, 3 Jaws, 84 Ton Capacity

  • Ready-to-use, integrated hydraulic cylinder, pump and puller.
  • Safety valve prevents spindles and pullers from being overloaded if excessive force is applied.
  • Spring-loaded center point on the hydraulic spindle allows easy centering of the puller on the shaft.
  • Supplied with extension pieces and one nosepiece.
  • Quick and virtually effortless bearing dismounting.
Check Stock

darkFlash 120mm RGB LED Case Fan for PC Cases CPU Cooling Fan Water Cooling Fan Addressable RGB Case Fan (MR12 5 Pack)

  • Super Quiet: Equipped with 8 rubber pads and hydraulic bearing, which lowers operating noise and improves efficiency..
  • Thin Halo Ring: The fan is a beautiful LED cooling system with various RGB color effect. The thin halo ring make your case looks more elegant and reduce light pollution while having colorful patterns..
  • High Quality: The motor adopts the hydraulic bearing technology, quiet, stable, long life 20000Hrs.
  • Addressable RGB Fan: Certified Compatible with Asus Aura. Variety modes are available for you to choose, includes the coolest color chasing mode, speed and brightness are adjustable.
  • Unique dual halo shows gorgeous and vivid visual effect.
Check Stock

uphere Long Life Computer Case Fan 120mm Cooling Case Fan for Computer Cases Cooling Black 3-Pack,PF120BK3-3

  • 1.Super Quiet: Equipped with rubber pads and hydraulic bearing, which greatly reduce operating noise and improves efficiency..
  • 2.Wide Compatibility:The most commonly 120mm size for computer case.Compatible 3-pin connector for main-board and power supply that also works with 4-pin headers..
  • 3.Run Smoothly:Balanced air volume and wind pressure for excellent performance, suitable for use in chassis or cold exhaust fans.
  • 4.Two Way Installation: Blow warm air out of the case. Draw cool air into your case..
  • 5.Long Service Life:Wear resistant hydraulic bearing construction makes the fan run noiseless and the air volume larger with an astounding service life of more than 40,000 hours..
Check Stock

12V Moisture-Proof Fan 120mm 2-Pack High Speed 12 Volt DC 2Wire 3Pin Exhaust Cooling Fan 3000RPM

  • ❤MOISTURE PROOF:12 volt exhaust fan 120mm fan designed for humidity area or electronics equipment cooling,especially for some DIY cooling in green....
  • ❤HIGH SPEED 3000RPM:120mm high speed fan with high pressure enhancement design for low noise around 47 dBA & high airflow 88CFM..
  • ❤EASY 2WIRE 3PIN:7V-15V 120mm 2wire 3pin for easy connection & multi-use for green house,kitchen refrigerator,RV refrigerator and other DIY cooling..
  • ❤HYDRAULIC BEARING :120mm 2 PACK Long Life Hydraulic Bearing fan,this makes sure the Required Cooling and Minimizes the Noise Level..
  • ❤100% 90 DAY MONEY BACK : If you are not satisfied for any reason, simply return your product for a full refund, no questions asked. You have....
Check Stock

VEVOR Hydraulic Pipe Crimping Tool Copper Crimping Pliers with Jaws 1/2 12.7mm 3/4 19.05mm 1 25.4mm 10T Hydraulic Copper Tube Fittings Crimper 40CR Steel for Copper Tube Plumbing and Fitting

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping....
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This....
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an....
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic....
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied....
Check Stock

NEW RAM HYDRAULIC THROWOUT BEARING FOR FORD TOPLOADER TRANSMISSIONS & STOCK C.

  • Brand New Ram Hydraulic Throwout Bearing Kit (Ram Part #78136)..
  • Works with Ford Toploader Transmissions that have a bearing retainer collar with an outside diameter of 1.375" or less, as the inside diameter of this throwout bearing is 1.380" * Toploaders either have an 1 1/16"-10 spline or 1 3/8"-10 spline input shaft.
  • This bearing isn't big enough to work with the 1 3/8"-10 version. * In addition, some toploaders with an 1 1/16"-10 spline shaft have a larger retainer, so it's a good idea to measure the retainer collar to make sure it is 1.375" or less..
  • Includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as a remote bleeder line..
Check Stock

CP3 RGB Computer Fans Addressable 120mm Case Cooling Fan Dual Lighting Loop Quiet Fan Compatible with AURA Sync, PWM PC Fan for Computer Case&Liquid Radiator Fan Adjustable Speed: 1000-1800RPM(3Packs)

  • ...orful light effect is controlled by motherboard automatically. We also provide additional controller if your motherboard doesn’t not support AURA, that allow you could create your own immersive lighting effects without technical obstacle..
  • 【Extreme Cooling Performance】CP3 PWM Fan optimized heat dissipation and hydraulic bearing ensured ultra quiet working environment . The blades was designed with a focus on minimum the noise level and delivering the superior airflow which up to 54.51CFM. The hydraulic bearing has an long lifespan up to 30,000 hrs. That helps to keep your computer’s system stable as rock in life time..
  • 【Ultra Quiet Design 】 Equipped with double-sided shock absorbing silicone rubber pads and hydraulic bearing, which reduce the working noise effectively. The noise is around 25dBA. No worry to disturb your family even you are in excited gaming..
  • 【Wide Compatibility】5v 3pin RGB lights connector and 12 v 4pin PWM power connector. The fan is 12v, the RGB is 5v, please connect to the 5v 3 pin motherboard head. Suitable for water cooling and support 120/240/360mm radiators. (CPU Cooler/Computer Case etc).
Check Stock

SuxiDi 2PCS Auto Car Truck Service Ramps Lifts, 10000lbs Heavy Duty Hydraulic Car Ramps Lift for Car Repair

  • 【STURDY MATERIAL】SuxiDi truck service ramp elevator is made of high-quality steel, and the exterior is painted to prevent rust. The hydraulic ramp is durable and suitable for all under-vehicle maintenance and inspections..
  • 【MAXIMUM LOAD-BEARING】The hydraulic truck ramp can lift 10,000 pounds.
  • the height of the hydraulic part can be adjusted within the range of 9.8-15in..
  • 【CAR RAMP LIFT SIZE】 Bottom length: 45 inches.
  • 【EASY TO INSTALL】SuxiDi heavy-duty hydraulic lift is easy to install, use and maintain. It is an ideal choice for maintenance and is very popular among auto maintenance personnel..
  • 【AFTER-SALES SERVICE】If you have any questions about our car lift, please feel free to contact us. Our car ramp lift are stocked in the United States, with fast and good shipping services..
Check Stock

XIXIAN Hydraulic Jack,Hydraulic Trolley Service/Floor Jack 2Ton Capacity Car Jack Automobile Repairing Tire Changing Lifting Tool with 140-290mm Height Labor-Saving

  • Heavy-duty hydraulic jack made of high-quality iron, the surface with anti-oxidation paint, strong, wear and corrosion resistant, long service time..
  • Thickened piston rod, support greater tonnage, more secure and labor-saving. Hydraulic lifting arm to ensure that the jack is more stable in the lifting process..
  • Longer lifting rod with ergonomic design, more labor-saving. Steel wheels, balanced forces, more flexible movement, strong load-bearing capacity..
  • With 2 tons(4400lbs) of load-bearing capacity, the minimum lifting height of 140mm, the maximum lifting height of 290mm..
  • Compact size, easy to store and carry, very suitable for car, truck, SUV, etc..
Check Stock

CBRIGHT 2 Pieces 6mm Female Thread Connector Bearing Steel Joint Rod End Bearing

  • Products can withstand radial load,Axial load or radial. Axial simultaneous joint load..
  • Due to the inner surface of the spherical inlaid composite material,therefore, the bearing in the work can produce self-lubricating..
  • Use: Joint bearings are widely used in engineering hydraulic cylinders, forging machine tools, engineering machinery, automation equipment, automotive shock absorbers, water conservancy machinery, etc..
  • 2 Pieces 6mm Female Thread Connector Joint Rod End Bearing.
Check Stock

CBRIGHT 4 Pieces 6mm Female Thread Connector Bearing Steel Joint Rod End Bearing

  • Products can withstand radial load,Axial load or radial..
  • Product Material: bearing steel. Axial simultaneous joint load..
  • Use: Joint bearings are widely used in engineering hydraulic cylinders, forging machine tools, engineering machinery, automation equipment, automotive shock absorbers, water conservancy machinery, etc..
  • Due to the inner surface of the spherical inlaid composite material,therefore, the bearing in the work can produce self-lubricating..
  • 4 Pieces 6mm Female Thread Connector Joint Rod End Bearing.
Check Stock