ReviewsHydraulic Cabin Cylinder

The ROP Shop | Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950

The ROP Shop replacement Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950.
Specs - Bore: 4". Stroke: 24". Clevis Mounting Holes Diameter: 1 1/8". Chrome Rod Diameter: 1 3/4" with 9/16" Mounting Hole. Maximum Operating Pressure: 3500 PSI. Welded Design. Double Acting. Rebuildable. Refer to images 2 & 3 for more information.
for/fits many of the following brands of log splitters: Tractor Supply Co (TSC), CountyLine, Huskee, MTD, Oregon, SpeeCo & SplitMaster.
Please be sure to verify your specs and/or part/model number to ensure correct fitment. Note: this is a new hydraulic cylinder, but may have some spots where paint is chipped off.

Check Stock

VEVOR Hydraulic Cylinder Liner Puller 15 Ton Liner Puller Tool, Both Dry-Type and Wet-Type Fit Diameter of 80mm-140 mm, Universal Cylinder Liner Puller Tool Set for auto Repair and Disassembly

15t Hydraulic Puller: Max Capacity: 15T. This hydraulic cylinder puller is suitable for all cylinders with a diameter of 80-140 mm. Both dry type and wet type can be used. It's ideal for the disassembly of internal combustion engine and cylinder liner..
Superior Quality: The hydraulic puller is made of premium steel and processed by precision forging. It is sturdy, corrosion-proof, and has stable performance. The support seats, lead screw, and screw nut are all thickened, which will be more durable..
Complete Puller Kit: A complete set of tools required for removing the internal combustion engine and cylinder liner. Every part is included, and they are easy to assemble. Our cylinder-pulling artifact can easily remove the cylinders without damage the original parts..
Easy Operation: This 15t cylinder liner puller is very simple to use. All you need to do is adjust the inner diameter of the cylinder liner that you need to pull out, and you can use it directly—no need to take down the crankshaft..
Wide Application: Suitable for the removal of internal combustion engines and cylinder liners. Also, suitable for pulling hubs, flanges, gears, bearings, and more. It is a great helper for the auto repair shop, garage, automobile maintenance..

Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers Mechanical Disc Brakes for MTB Mountain Bike E-bike and Electric Bike 2PCS Front/Rear Gold

【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....

Check Stock

Hydraulic Suction Strainer Filter Mahindra 000013701P04

THIS IS A BRAND NEW PART. HYDRAULIC SUCTION STRAINER FILTER PHASE 2. REFERENCE PART NUMBER : MAHINDRA 000013701P04.
Fits Mahindra Tractor Models : 3535 Gear, 3540 HST Cabin T4, 3540 HST T4 ,3540 PST Cabin T4, 3540 PST T4, 3550 HST Cabin T4, 3550 HST T4 ,3550 PST Cabin T4, 3550 PST T4, 3640 HST Cabin T4, 3640 HST T4, 3640 PST Cabin T4, 3640 PST T4, 3650 HST Cabin T4, 3650 HST T4, 3650 PST Cabin T4, 3650 PST T4, 4025 4WD T4, MH50 4WD, mPower 75 (4WD Platform T4), mPower 75P (4WD Cabin T4) ,mPower 85 (4WD Platform T4), mPower 85P (4WD Cabin T4),.
Also fits Mahindra Tractor Models : 4035 Gear, 4035 HST ,4035 PST, 4530 4WD T2, 4530 4WD-T4, 4535 Gear, 4540 4WD-T4, 4550 4WD-T4, 5035 Gear, 5035 HST ,5035 PST ,5045 2WD, 5045 4WD, 5055 2WD, 5055 4WD, 5520 2WD ,5520 4WD ,5530 4WD T2, 8090 CAB, 8090 CAB - Up to 2019, 8100 CAB ,8100 CAB - Up to 2019, 8560 2WD-T3, 8560 4WD-T3 Cabin,.
Also fits Mahindra Tractor Models : 5555 4WD-T4 Synchro ,5565 4WD-T4 Synchro ,5570 4WD-T4 Synchro, 6030 4WD T2,6065 2WD OLD ,6065 4WD CABIN-OLD ,6065 4WD OLD, 6075 4WD CABIN OLD, 6075 4WD OLD, 6520 2WD, 6520 4WD, 6530 4WD T2, 6530 4WD-T3 ,7060 4WD Cabin, 7060 4WD-T3, 7085 4WD, 7085 4WD - Up to 2019, 7095 4WD Cab, 7095 4WD Cab - Up to 2019, 7520 2WD ,7520 4WD, 8560 4WD-T3.

Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers, Mechanical Disc Brakes for MTB, Mountain Bike, E-bike and Electric Bike 2PCS Front/Rear Red

【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way brake system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
【Upgrade Design】: HB-100 uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the line pulling hydraulic brake of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
【Note】: Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.

Check Stock

Enerpac P-39 Single Speed Steel Hand Pump

High-pressure hydraulic hand pump for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately).
Advances and releases a single-acting cylinder.
Maximum operating pressure of 10,000 pounds per square inch (psi).
Single-speed pump for applications with a constantly applied load.
Internal pressure relief valve helps prevent pump overload.

Check Stock

Hydraulic Brake Clutch Handlebar Control Kit Switch Housings for 14-Up Harley-Davidson Touring FLHT FLHX Road Glide 47-701 (Chrome)

Brake master cylinder with lever. Hydraulic clutch master cylinder with lever. Switch housings..
Fits for Harley-Davidson 2014-2016 FLHT/FLHX and Road Glide models with stock hydraulic clutch..
11/16" (15mm) bore brake master cylinder..
Better look and finish than any other product..
Kits come complete with all hardware for easy installation..

Check Stock

Hydraulic Door Closer and Adjustable Hook Freezer Door Closer Flush to 3/4 Inch Hook

Silent Closure: This freezer door closer has a powerful hydraulic cylinder that ensures smooth opening and closing of the freezer door..
Hydraulic Core:Powerful gas-loaded hydraulic cylinder guarantees controlled closure. The simple spring mechanism can be used for more than 500,000....
Material: Made of 304 stainless steel, durable enclosed housing. Reducing the degree of wear and tear. Extended service life..
Package:This package includes a door closer for the freezer, an adjustable wide hook, and eight screws. .
Warranty: We provide two years warranty. So feel free to contact us if you have any problems about this product..

Check Stock

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....

Check Stock

NEWTRY Hydraulic Ram Cylinder 20 ton Hydraulic Jack Lifting Cylinder Hydraulic Porta Power Cylinder Ram 0.51” Low Profile Hydraulic Ram Jack Mini, Portable for Shipbuilding, Bridge, Construction

... 20T | Stroke: 0.51 inch/13mm | Self height: 2.3 inches/58mm | Outer diameter: 4x3 inches/100x80mm | Internal diameter: 2.6 inches/65mm | Weight: 6 lbs/2.75kg | Effective area: 5.13 square inches/33.16cm2 | Usded with Pump: CP-180(not included)..
▷[SMALLER SIZE & GREATER WORKING CAPACITY]---The height of this hydraulic jack is only 2.3inches, which can lift 20T heavy objects. It has the advantages of smaller size and greater working capacity, especially in a small space location, and has the functions of portability, flexibility, and large lifting force..
▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder..
▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has multiple functions such as lifting, jacking, shoveling and splitting, and can be quickly installed by using quick connectors. 10T and 20T jacks are suitable for CP-180 pump and 30T is suitable for CP-700 pump..
▷[WIDE RANGE OF APPLICATIONS]---This Low Profile Hydraulic....

Check Stock

Mophorn GO-KART Brake Master Cylinder Kit for 150cc Go Kart Hydraulic Brake Kit Universal Go Karts Brake Kit Kandi Complete Including Master Cylinder, Hose, Caliper, Pad for 150cc

High Adaptability: This go-kart hydraulic brake kit is compatible with Hammerhead and Trailmaster karts and other 150cc go-karts. It provides superior performance demanded by off-road enthusiasts..
Promised Braking & Cooling: This hydraulic brake kit features heavy-duty stopping power for everyday drivability. Drilled & slotted rotors improve heat dissipation during extreme conditions..
Quality Material: The master cylinder of this go-kart brake kit is made of high-performance aluminum, preloaded with DOT3 brake fluid. The brake discs are constructed from high-quality steel, durable and lasting for daily use..
Complete Accessories: The go-kart hydraulic brake assembly includes a master cylinder, three brake calipers, three brake hoses, and brand-new brake discs. It comes ready to install, pressurized with brake fluid. Do not worry about bleeding the brakes..
Key Parameters: Bolt Spacing of Master Cylinder Brake Pedal: 0.787" / 20 mm.
Master Cylinder Mounting Hole: 2.36" / 60 mm center to center. Three rubber brake hoses: 34" / 860 mm, 43" / 1090 mm, 75" / 1900 mm..

Check Stock