ReviewsHydraulic Clutch Brake Hose

Mityvac MV6400 1 Gallon Fluid Dispensing System for Topping Off Fluid Reservoirs, Master Cylinders Includes 5 ft. Hose with Wand and Flow Control Valve

  • The MV6400 is intended for filling reservoirs with fluids such as engine coolant, motor oil, or wiper, automatic transmission, brake or power steering fluid. However, with the proper accessories it can safely be used to pressure bleed hydraulic brake or clutch systems, or refill or top-off sealed automatic transmissions..
  • An integrated manual pump dispenses fluid by pressurizing the 1.2 gallon (5 liter) reservoir and Includes a thumb-operated tilt valve that is conveniently located for manual pressure relief and doubles as a safety valve to prevent over pressurization..
  • Fluid is continually dispensed as long as there is pressure in the reservoir and freeing up the operator’s hands.
  • pumping is only required to build additional pressure..
  • The pump tube is sealed to prevent exposure to chemicals and cleans easily between fluid changes..
  • For convenience and speed, push-to-connect, quick-change-style couplers are used at both ends of the fluid dispensing hose..
Check Stock

ACDelco GM Original Equipment 10-4110 DOT 3 Hydraulic Brake Fluid - 16 oz

  • Premium Brake and Hydraulic clutch fluid that protects internal components from corrosion under normal use.
  • High boiling point to minimize Brake fluid boiling and vapor lock.
  • Excellent low temperature capability and stability when used where lower cold viscosities are required.
Check Stock

X-Pro Hawk DLX 250 EFI Fuel Injection 250cc Endure Dirt Bike Motorcycle Bike Hawk Deluxe Dirt Bike Street Bike Motorcycle (Black)

  • Hawk DLX 250 EFI Dirt Bike broughtMoto Pro..
  • 5-Speed Manual Transmission: Heavy-duty clutch offers smooth, progressive engagement and smooth-shifting. Take fully controlyour bike, Pros best choice!.
  • Kick Start/ Electric Start, Electric start for easy starting well the kick startbeing useda backplanany unexpected situations..
  • Front and Rear Hydraulic Disc brakes allows the bikecomea faster stop than other brake systemsmakingmore safeuse.any rider would tell you, powernothing without good brakes. The high performance Hydraulic disc brake makes this bikeexperts choice..
Check Stock

Buytra 2 Pack 50ML Plastic Syringe with Handy Tubing 80cm Long for Injecting, Drawing Oil, Fluid and Water

  • 50CC large plastic syringe with attached 31.5" long tube, ideal for injecting, draining fluid, oil, water.
  • 50ml capaicy- a handy size for either siphoning off fluid from an over-fill, or filling difficult to access assemblies.
  • 31.6"Long Tubing- the attached hose works well for extracting liquids from otherwise hard to reach places and also can be cutted to the required length as your purpose, flexible to use.
  • Clear Volume Markings- easy-to-read graduation lines on the side for easily measuring liquids while transfering them.
  • A range of applications- can be used as a car oil syringe for sucking brake, supercharger oil, clutch, hydraulic, or power steering fluid out, also as a garden syringe for measuring liquid nutrients, as well as great for glueing projects, lab experiment.
Check Stock

MWMNUN 2400mm AN3 M10 Motorcycle Hydraulic Brake Line Oil Hose Pipe Fitting Stainless Steel Braided Compatible with ATV Motorcycle Motocross Pit Dirt Street Racing bike-2400mm blue

  • Size:Diameter is Φ10mm, Two side banjo bend is 28°to 90°.
  • Material： parts is steel with anti-rus coating. Hose Parts - Inner Layer is Nylon flexible hose, Middel Layer is stainless steel wire braided, Outside Layer is clear color PVC protection..
  • Fit FOR: Can be used for transfer pressure for all car's & motors UTV. ATV etc.hydraulic brake system AN3 1/8" ..
  • Package included:1 x Hydraulic Brake Line Oil Hose Pipe Fitting,6 cable ties..
  • NOTICE - Please check the description and compatibility chart to verify the fitment before your purchasing.
Check Stock

BILITOOLS 3L Vacuum Brake Bleeder Kit One Person Pneumatic Brake Fluid & Clutch Bleeding Extractor Tool with Adapters & 1L Refilling Bottle

  • A lightweight, easy to carry pneumatic brake, clutch and engine oil change tool with automatic cut off, can be used by one person..
  • Compare with other similar product, our larger capacity Pneumatic Brake Bleeder can automatically and continuously provide more suction to allow more quick bleeding of brake and clutch lines..
  • Quick, clean and efficient operation without specialized brake reservoir caps. Draws fluid from the bleed screw, enabling either bleeding or full replacement of fluid in system..
  • Includes 1L brake fluid refill bottle, 3L pneumatic brake bleeder tank with 63 inches flexible hose and universal bleeder screw adapter. Designed to drain most standard and ABS brake systems..
  • Inlet air pressure:4.8-11.6 bar (70 -170psi). Avg.air cons 4.5 CFM. Come with 16 pieces bleed screw adapters for a variety of bleed screw..
Check Stock

Desktop Cycling Class: Spin Your Stress Away! (RP Minis)

  • Size: Oil pipe length:1270mm(50 inch), Bottom Pump installation pitch:51mm(2.01 inch).
  • Upgraded Hydraulic Brake System For Mini Bike Baja Doodlebug DB30 50incch Hose,Hydraulic upgrade from the cable actuated caliper . A lot more clamping force on the rotor than the old mechanical cable calipers.
  • This also can be adapted to other Minibikes/Go Karts, But brackets will need to be fabricated..
  • Please check as much as possible to make sure the item is the one that you need..
  • Package Contents: 1 x Brake Assembly，3 x tie.
Check Stock

GZYF Short Adjustable Brake Clutch Levers Compatible with Kawasaki NINJA 250R 2008 2009 2010 2011 2012 / Kawasaki Ninja 300 2013 Black

  • The clutch side is not compatible for Hydraulic clutch..
  • Easy install. Please double check your bike’s Year Make Model will be compatitable with the bikes we listed in the Product Description before purchase..
  • The levers fit(please purchase levers according to the model and year listed): Kawasaki NINJA 250R 2008 2009 2010 2011 2012 / Kawasaki Ninja 300 2013.
Check Stock

Motive Products - 0101 Brake System Power Bleeder 3 Round Adapter - See Application Guide For Fitment

  • Heavy duty 2 quart pressure tank holds enough fluid to do complete flush & bleed..
  • Built-in hand pump (no other pressure source is needed).
  • Precision pressure gauge ensures safe and effective operation..
  • Tested for compatibility with both standard and synthetic hydraulic fluids..
  • All bleeders come with everything you need to bleed your hydraulic brake or clutch system and a full 1 year warranty..
Check Stock

Fireyouracing Mountain Bike Hydraulic Disc Brake DOT Mineral Oil Bleed Kit for AVID Formula Hanyes Echo Shimano Tekro HS33 Magura Nutt (Normally Combination)

  • 【Massive stopping power】This hydraulic brakes for mountain bike is an upgrade kit from the mechanical disk brakes system, you can stop with two fingers only, ideal for trail riding,downhill, choppy mountain，snow, beach, flat road etc, keep you cycling safety...
  • 【Easy to install】Bucklos mtb hydraulic brake set already pre-bled mineral oil for you, you can unboxing ready to install or replacement. Before installation, please confirm whether the hose length is fits with your bicycle frame and if use 180mm, 203mm rotors please replace the adapters.
  • 【Fit most bikes】 HB-875 Zoom hydraulic brakes caliper is dual piston full oil pulling which is equipped with IS/PM universal conversion adapter & mount, compatible with 160mm rotor. brake levers are made of high-end aluminum alloy, fit most of bicycles, like electric ebikes, scooter, folding bikes, fat bike, bmx etc.
  • 【Quiet braking】Bucklos hydraulic disc brakes for mountain bike is made of resin-metal composite braks pads which protect your rotors and do not make any noise when you cycling.
  • 【Brake direction】Bucklos bike hydraulic brakes adopts left-front/ right-back braking method, fits the habit of most American people, cable for front is 800mm, rear line is 1450mm.
Check Stock

Universal Motorcycle ATV Hydraulic Brake Hose Line Aluminum CNC Pipe Tee Connector Coupling Tee Fitting 3 way Adapter (Black)

  • Information: Size is 44*39*17mm, Connector Bolts Hole is M10*1.25， Material: aluminum alloy， 100% CNC.
  • Applicable models for General M10 Brake Hose，mainly used for branching 2 brake discs with brake hose 10mm Banjo Hole (suitable for most hydraulic brake systems!).
  • ADVABTAGE: The beautiful shiny finish with anodized treatment lever improves corrosion resistance and hardness, and prevents bending and damage at the time of crash..
  • EASY INSTALLATION: Perfect and easy to fit, no need modification. 100% test before shipping to ensure product perfect, stability and durability..
Check Stock