ReviewsHydraulic Compression Tools

1/4\ NPT ISO 7241-B Hydraulic Quick Connect Couplers/Couplings w/Dust Caps,1/4” Body Size + 1/4” NPT Thread Poppet Valve

The hydraulic quick connect couplers with 1/4” Body Size + 1/4” NPT Thread Poppet Valve.
The Series B couplers are interchangeable with all ISO 7241 B series couplings,with 3600 PSI Rating, 14,500 PSI Burst Rating (Coupled).
Couplers have double O-rings seal for redundancy in low pressure and vacuum applications.
Applications:used in hydraulic applications such as automotive, electronics industries,machine tools,aerospace,mobile hydraulic and other equipments applications..

Check Stock

3/8\ Flat Face Hydraulic Quick Connect Couplers/Couplings with Dust Caps,The Universal Hydraulic Quick Coupler Interchange with 3/8\ Body ISO 16028 Standard, 3/8\ Body+ 3/8\ NPT Thread

The flat faced hydraulic quick connect couplers with 3/8" Body + 3/8" NPT Thread, impoved design high flow performance and maximum service life.
The universal hydraulic quick connectt coupler interchange with 3/8" Body ISO 16028 standard flat face couplers..
Applications:used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,constructionindustrial hydraulic lines..
Non-spill flush face valves minimize fluid losses,with 5076 PSI Rating - 12.15 GPM Max Flow Rate.
Made by harden steel construction with zinc nickel plating for superior corrosion resistance ,and one hand push-to-connect operation.

Check Stock

Cyclon Shimano MT200 MTB Hydraulic Disc Brakes Set, Left Front 800mm Right Rear 1400mm with Rear PM/is Adapter Aluminum Alloy Hydraulic Bike Brakes, Dual Disc Piston Fit 160mm Rotors Hydrauli Brakes

【Brake Size】: For Cyclon shimano brakes,left side controls the front, right side controls the back, cable of front is 800mm, cable of back is 1400mm, with rear PM/IS adapter..
【Massive Stopping Power】: Shimano hydraulic brakes is the best upgrade kit from mechanical brake, dual-piston oil pressure hydraulic brake caliper helping you braking easier, you can stop with almost no pressure..
【Quiet Braking】: The brake pad of this shimano mt200 hydraulic brakes is made of resin-metal composite pads, not only not damage your rotor, but also not make any noise when braking..
【High Compatibility】: Shimano disc brakes set suitable for most mountain bikes, electric ebike,fat bike,folding bike,scooter (You only need to consider whether the tubing is long enough, package not inclued adapter..
【Easy to Install】: shimano hydraulic brake set uses mineral oil fluid(pre bled), unboxing ready to install and use. And unlike other low-end hydraulic brakes, you can easily buy professional maintenance tools and pad..

Check Stock

VEVOR Hydraulic Steering Cylinder 300HP, Hydraulic Steering, Front Mount, Hydraulic Outboard Steering Cylinder for Marine Boat Steering System

Max Working Pressure: 10.3Mpa: The hydraulic steering cylinder for outboard has a working pressure of up to 10.3Mpa, about 1500psi..
Advanced Crush Resistance: State of the sealing system offers superior resistance to repeated compression set and is designed to better withstand the harsh environment..
Built-In Two-Way Lock: The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion..
Easy to Install: This steering cylinder includes positionable stainless steel O-Ring (ORB) fittings for easy hose routing. We made this design also for easy installation and replacement..
Wide Application: Suitable for ships under 300 horsepower, outboard-powered boats like the center console, offshore fishing, bass boats, flats boats, and many more..

Check Stock

The ROP Shop | Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950

The ROP Shop replacement Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950.
Specs - Bore: 4". Stroke: 24". Clevis Mounting Holes Diameter: 1 1/8". Chrome Rod Diameter: 1 3/4" with 9/16" Mounting Hole. Maximum Operating Pressure: 3500 PSI. Welded Design. Double Acting. Rebuildable. Refer to images 2 & 3 for more information.
for/fits many of the following brands of log splitters: Tractor Supply Co (TSC), CountyLine, Huskee, MTD, Oregon, SpeeCo & SplitMaster.
Please be sure to verify your specs and/or part/model number to ensure correct fitment. Note: this is a new hydraulic cylinder, but may have some spots where paint is chipped off.

Check Stock

MroMax Brass Compression Tube Fitting-6mm /0.24\ ID Male Thread Pipe Adapter for Water Irrigation System 3Pcs

【Product Size】Inner Diameter (I.D.): 6mm / 0.24".
【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
【Wide Application】Widely used in residential and commercial usage..

Check Stock

MroMax Brass Compression Tube Fitting-6mm /0.24\ ID Male Thread Pipe Adapter for Water Irrigation System 1Pcs

【Product Size】Inner Diameter (I.D.): 6mm / 0.24".
【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
【Wide Application】Widely used in residential and commercial usage..

Check Stock

MroMax Brass Compression Tube Fitting-8mm /0.31\ ID Male Thread Pipe Adapter for Water Irrigation System 3Pcs

【Product Size】Inner Diameter (I.D.): 8mm / 0.31".
【Material】Brass Compression Tube Fitting is made of brass. Brass for corrosion resistance, ductility at high temperature and low magnetic permeability..
【Feature】Can be used with copper, brass, aluminum and plastic tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications..
【Note】Only used for irrigation or hydraulic systems, NOT allowed to be installed for potable water..
【Wide Application】Widely used in residential and commercial usage..

Check Stock

3/4\ SAE Skid Steer Bobcat Flat Face Hydraulic Quick Connect Couplers with Dust Caps,The Universal Quick Disconnect Coupler Bobcat Case/New Holland, Kubota

The flat face hydraulic quick connect couplers with 3/4" SAE thread+ 1/2 body, impoved design high flow performance and maximum service life.
The universal quick disconnect coupler connect interchange with most models of skid steers loaders including Bobcat Case / New Holland, Kubota.
Applications:used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,constructionindustrial hydraulic lines..
Non-spill flush face valves minimize fluid losses.
Made by harden steel construction with zinc nickel plating for superior corrosion resistance ,and one hand push-to-connect operation.

Check Stock

1266 Adjustable Gland Nut Wrench & 7463 Universal Hydraulic Cylinder Spanner Wrench For Most Farm and Construction Equipment (set of 2)

WORKS ON -- Alternative to OTC 1266 & 7463. For use on hydraulic cylinders with nuts from 2" to 6" (51mm to 152mm) and 1" to 3-3/4" (25 - 95mm)..
NICE DESIGN -- 1266 Reversible to fit 1/4” & 5/16” diameter pin holes, 7463 Reversible to fit 1/4 & 7/32" diameter pin holes. Both are manufactured from quality steel..
COMPATIBLE WITH -- Specially designed to fit hydraulic cylinders on most farm and construction equipment. Repair tool for backhoe and other heavy equipment / farm machines / hydraulic machinery..
BENEFIT -- Heavy duty wrench features a 3/4”(1266) / 1/2"(7463) square drive to tackle even the most stubbom gland nuts..
A MUST HAVE -- The ability of these tools to work on gland nut from 2" to 6" / 1" to 3-3/4" is a valuable quality, enabling it to be used in a variety of ways..

Check Stock

750W Electric Driven Hydraulic Pump Single Acting Manual Valve 10000PSI Manual Valve Power-Units 7L 1400r/Min

[Feature]If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
[Working mode] Manual valve controls the return oil.The motor must have reliable grounding..
[Note]The oil pump regular working temperature between 10℃~50℃,when find the oil temperature≥70 ℃ should stop using after continuous working under high pressure, let it self-cooling before use..
[Use Occasion] The pump can be used for a variety of hydraulic equipments.Punching machine, bending machine, Jack split hydraulic products..
[Satisfaction Service]We ship directly from the US warehouse.If there is any questions please feel free to contact with us, we will response in 24 hours and we will provide the best suitable solutions for you..

Check Stock