ReviewsHydraulic Cutting Press

OTC 1834 25-Ton Capacity Shop Press with Air-Driven Hydraulic Pump

  • OTC's tough, economical, 25-ton capacity press features heavy steel construction with a durable powder coat finish and is ideal for pressing rear axle bearings, piston pins, and much more.
  • Large 30 inch x 46 inch work area under ram makes positioning of even bulky work easy.
  • Pneumatically driven hydraulic pump with simple foot operation keeps both hands free.
  • press bed is raised or lowered with a hand crank, allowing one-person set-up and operation.
  • Complete with No. 4020 Air-Driven Hydraulic Pump, No. 9652 Gauge, No. 24815 Tee, No. 9768 Hose, No. 51426 Hydraulic Ram with 6-1/4 inch stroke.
  • Unit stands 69-1/2 inches tall, 40-1/2 inches wide, and 28 inches deep.
  • frame extension holes are on 4 inch centers.
  • backed by OTC's Lifetime Marathon Warranty.
Check Stock

Happybuy Hydraulic Pump Electric Double Acting Manual Valve Hydraulic Pump 10000 PSI Electric Hydraulic Power Unit for Home and Commercial Using (Double Acting)

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min..
  • Large Capacity Tank: With a large fuel tank capacity, 8L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The pump uses 16th hydraulic oil. It has the advantages of compact size, lightweight, simple structure, and ease of use..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the hydraulic pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this double-acting hydraulic gear pump by a lever which has a rubber cap in one end for a comfortable grasp and use. Control two equipment at the same time, pretty efficient. The oil pipe coupling is fitted with a PT3/8” thread..
  • Various Application: The manual hydraulic pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. ....
Check Stock

Happybuy 10152 PSI Hydraulic Electric Pump 750W Single Acting 110V Solenoid Pedal 7L Hydraulic Power Pack Cylinder

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min..
  • Large Capacity Tank: With a large fuel tank capacity, 7L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The hydraulic pump tank uses the 15th hydraulic oil. It has the advantages of compact size, lightweight, and simple structure..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this single acting electric oil pump by a lever which has a rubber cap in one end for a comfortable grasp and use. The high-pressure oil pipe is of high quality and durability. The oil pipe coupling is fitted with an M10 thread. Connector Type: 3/8" NPT ISO 14540 quick hydraulic coupler with dust cap..
  • Various Application: The pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending,....
Check Stock

NA Black Hydra Krimp 71500 AC Hose Crimper

  • The lightweight hand-held hydraulic press is very portable..
  • Crimping pipes and fittings in an easy and labor-saving way..
  • The kit is applicable for beadlocking fitting and barrier A/C hose..
  • The dies snap quickly into the press fixture requiring no pins or screws..
  • Wide Application: The hydraulic crimper is ideal for shop and field operations, crimping pipes and fittings in an easy and labor-saving way. Customize....
Check Stock

Electric Hydraulic Pump Power Pack Unit 2 Stage Single Acting Electric Driven Hydraulic Pump Pedal Solenoid Valve Control equipments 2-70 Mpa

  • Electric hydraulic pump input voltage: 110V.Motor power: 0.75KW.Function: Single-acting, manual valve.
  • The pump can be used for a variety of hydraulic equipments..
  • Working mode: Pedal Solenoid valve Control.
  • Punching machine, bending machine, Jack split hydraulic products.
  • If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
Check Stock

CNCEST Press Heat Machine, 5T Hydraulic Jack Heat Press Machine 2.4X4.7 Inch Dual Heated Platens 900W Heat Press Plates w/Precise Pressure Gauge & LCD Controller for Efficient Press

  • 【Wide Application】Hydraulic tech heat press machine is widely used for extraction of PU leather,plastic particles,dry flowers and plants.Maximize your starting material’s potential and desired outcomes. For each starting material, easily experiment and record your notes for future reference..
  • 【High Quality Heat Plate】The heat press comes with 4cm thick solid aluminum heating element, uniform heating, and smooth surface, heating plate size 6*12cm (2.4"*4.7")..
  • 【Manual Hydraulic Jack】The heat press machine is equipped with 5 tons manual hydraulic jack, high pressure pumping oil.
  • Continuously update the process, pass thousands of durability tests, continue to simplify operations,the convenient switch of heat press make it easier for you to use.
  • 【Accurate LCD Controller】The controller box is movable, the heating speed is faster, and the touch LCD screen can accurately display the time and temperature, with good performance..
  • 【Service Guarantee】Fast shipping from Amazon.
  • Satisfied problem solutions response within 24 hours.
  • Assured promise for return,replacement,refund based on quality & shipping problems(please keep efficient contact through amazon with us if needed)..
Check Stock

VEVOR Hydraulic Power Unit 12 Volt Dump Trailer Hydraulic Pump Double Acting 6 Quart Hydraulic Pump Electric Hydraulic Pump with Brass Pressure Gauge for Dump Trailer Lift Gates & Trucker

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 7Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min..
  • Large Capacity Tank: With a large fuel tank capacity, 7L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The pump uses the 15 - 46 anti-wear hydraulic oil. It features compact size, lightweight, simple structure, and ease of use..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 7Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this single acting hydraulic gear pump by a solenoid valve. The high-pressure oil pipe is of high quality and durability..
  • Various Application: The manual hydraulic pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending, straightening, cutting, assembly, and disassembly. Reduce manual work and maximize work efficiency..
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Flaring Tool Set Brake Repair Brake Flaring Tools for 1/4 -3/8 Brake Flare Tool with Tube Cutter and Deburrer Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with φ 1/4", 5/16", 3/8" expanding dies and adapters, including 45° flaring cone,....
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with....
  • Pipe Cutting & Deburring: The flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging....
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a....
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper and stainless steel piping. It is an excellent tool for repairs on....
Check Stock

Hydraulic Exhaust Pipe Expander 1-5/8' to 4-1/4' Inches, Exhaust Pipe Stretcher Tool, Muffler Pipe Spreader Automotive Car Tool Kit for Tail Pipe Tube

  • This tool kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Perfect for home DIY or professional auto shops..
  • The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1 5/8" - 2" Collet, Steel expander 2" - 2 1/2" Collet, 2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" Collet, 3 1/8" - 3 1/2" Collet, 3 1/2" - 3 7/8" Collet, 3 7/8" - 4 1/4" Collet..
  • Collets is made of 6061 Aluminum, use oxidation treatment.The expander utilizes Tempered 40CR Alloy Structural Steel, using quenching and phosphating treatment. Let it have more hardness and longer service life..
  • Ten tons of hydraulic pressure expand the pipe quickly for a perfect fit. Works with all sizes of pipe from 1 5/8" up to 4 1/4" diameter. Great for installing catalytic converters or for making your own custom exhaust system, pipe will not spin..
  • Manual hydraulic pump can be used with split hydraulic products, such as punching machine, cutting machine, bending machine, hydraulic jack, hydraulic puller, split hydraulic clamp, flange expander, split ram and other separate hydraulic equipment..
Check Stock

Boenoea Bike Water Bottle Cage Aluminum Alloy Lightweight Bicycle Water Bottle Holder for Road Bike MTB Cycling

  • 1. Hydraulic Hose Cutter: Aluminum Alloy Body, Lightweight Design, Compatible with Various Oil Needle Specifications, BH59/BH63 BH90 Can Cut Oil Pipes, Cutting Neatly, Conveniently and Quickly..
  • 2. Bike Hydraulic Disc Brake: Compatible with Ordinary Oil Needles and Five-wire Bodies, and the Side Cutter Design Can Cut Oil Pipes..
  • 3. Hose Cutter Tool: Efficient and Precise Operation, Avoiding the Twisting and Deformation of the Oil Pipe Caused by Violence, the Aluminum Alloy Cross Arm Knob Is Detachable, Aluminum Alloy CNC Processing,.
  • 4. Hose Cutter: the Cutting Is Convenient and Fast, and the Cutting Is Neat. (Blade Can Be Replaced by Design).
  • 5. Needle-assisted Positioning, Static Placement, Compatible with Ordinary Oil Needles. Round Head Auxiliary Positioning, Static Insertion, Suitable for Five-wire Body Insertion, Easy to Switch Between Double Plugs..
Check Stock

Dulytek Retrofit Heat Caged Plate Kit 3 x 8 Anodized Aluminum Plates for 15-30 Ton Hydraulic or Air-Operated Shop Presses

  • 3" x 8" Dual Heating Insulated Plates For 15 - 30 Ton Hydraulic or Air-Operated Shop Press.
  • High Pressure Operation Makes Pressing At Lower Temperature To Obtain Pretty Good Consistency.
  • For Pairing with Powerful Hydraulic or Air-Operated Shop Presses.
  • Precise Two-Channel Digital Controller with Temperature & Press Timer and Magnetic Feet.
  • Fahrenheit and Celsius Temperature Scale Options.
  • Caged Plates (DHPK38), Control Unit, AC Power Cord and Operation Manual Enclosed.
Check Stock