ReviewsHydraulic Cylinder Kit

Bonvoisin 20T Hydraulic Cylinder Jack Porta Power Ram 2' Stroke Mini Single Acting Lifting Cylinders with Hydraulic Hand Pump for Machinery Shipbuilding

  • [Small & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
  • [Automatically Retract] - This hydraulic ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate..
  • [Used with Pumps] - The porta power ram should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2).
  • the 30T/50T can be used with CP-700 hydraulic pump (ASIN: B08QV222RP)..
  • [Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..
Check Stock

Fix Sinking Office Chair, Mellbree 304 Stainless Steel Chair Saver Kit Height-Adjustable Office Chair Saver for Stop Sinking Without Cylinder Replacement (with Hexagon Wrench)

  • ...ging. All recommend this pure metal gasket style. Office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, and can rotate the seat normally after improvement (the old plastic model cannot). As a simple replacement consumable, please contact us with any questions..
  • Because the hydraulic system of the old chair was damaged, the office seat kept sinking and could not maintain the desired height. Using Mellbree fix sinking office chair can solve this trouble, make the chair at the ideal height, easy to install and replace, save money and effort. Suitable for most office chairs, within the cylinder diameter of 25-28mm..
  • Installation steps: The chair saver kit uses screws to fix the metal plate to control the sinking of the chair. Step 1: Adjust the seat to the desired height, and wipe the hydraulic oil on the exposed surface of the hydraulic rod（Keeps hydraulic rods and sheet metal dry） . Step 2: Install the metal plate and rubber gasket, and clamp them to the lowest and fix it with screws. Step 3: Use a hexagonal wrench to twist the screw vigorously and fix it, try to sit and fine-tune it..
  • The sinking chair fix kit is made of 304 stainless steel, which is durable and easier to install than plastic models. After ....
Check Stock

Bottle Jack Ram 10 Ton Capacity Porta Power Hydraulic Pump Auto Body Frame Repair Tool Kit Power Set Auto Tool for Automotive Truck Farm and Heavy Equipment/Construction Skroutz

  • ▷[IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable..
  • ▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2 inches high, but the stroke is up to 1 inch. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use..
  • ▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder..
  • ▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has multiple functions such as lifting, jacking, shoveling and splitting, and can be quickly installed by using quick connectors. 10T and 20T jacks are ....
Check Stock

Mophorn 20T 4Inch Hydraulic Cylinder Jack Hollow Single Acting Hydraulic Ram Cylinder 100mm Hydraulic Lifting Cylinders (20T 4Inch Hollow)

  • Heavy Duty Jack: Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Paint spraying at the surface, prevent scratching and corrosion..
  • Large Lifting Capacity: Our ram hydraulic cylinder is designed to provide reliable support during operation. No stuck when lifting, large 20 T/44000 LBS tonnage, enough stroke(100 mm/4 inch)..
  • Convenient Use: Quick connecting head with dust cover, preventing the jack's inside from dust, features firm connection with no leakage. A portable handle increases flexibility and convenience..
  • Smooth Surface: The hydraulic ram cylinder features a smooth surface with circle texture, provide reliable support during working..
  • Wide Usage: This hydraulic jack cylinder has the advantages of small size, suitable for narrow space position. A great helper for riggers, fabricators, welders, and automotive body and frame shops in electric power, chemical industry, steel, Bridges, machinery, and other industries..
Check Stock

M3GAN

  • Standard Scissor Hoist Kit Complete with: – Cylinder – Mounting Brackets – Dump Body Hinges – Hoses – Connectors – Safety Bar – 12vDC Hydraulic Pump – 15′ Control with Power Up / Power Down – Safety Labels & Manual.
  • Standard Kit: 3 yr Manufacturers Warranty.
  • 10 Ton (20,000 lb) When Applied to 10′ to 16′ Dump Body Trailers.
  • Includes Johnson Trailer Parts 32oz Double Walled Mug!.
  • Perfect for Dump Trailers | Comes Painted!!!.
Check Stock

Uflex GOTECH 1.0 GoTech 1.0 Hydraulic Outboard Steering Kit

  • For pontoon boats and other boats with moderate torque.
  • Kit Includes: - (1) UC81-OBF cylinder - (1) UP18 helm - (2) Quarts of Oil, 15 SAE - 30' of nylon tubing.
  • Designed to handle 4-stroke outboard engines up to 115HP.
Check Stock

Mophorn Hydraulic Steering Cylinder HC4645H Front Mount Hydraulic Outboard Marine Steering Cylinder Suit for Up to 150HP Boats Steering

  • HC4645H Front Mount Cylinder: HC4645H steering cylinder is ideal for outboard powered boats like center console, offshore fishing, bass boats, flats boats and many more. For use with Yamaha applications where it is necessary to mount the steering cylinder underneath the steering arm..
  • Advanced Crush Resistance: Our hydraulic outboard steering cylinder provides excellent resistance to repeated compression set and is designed to better withstand the harsh marine environment..
  • Built-In Two-Way Lock: The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion..
  • ORB Fitting: The Positionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing. And we put two extra tubes for easy installation and replacement..
  • Sturdy Aluminum Alloy: The hydraulic steering cylinder is made from a high-strength aluminum alloy material, which is corrosion-resistant, and high-density to effectively prevent seawater erosion. Enjoy the steering helm for years to come..
Check Stock

CNC Aluminum 7/8' (22mm) Universal Motorcycle Dual Hydraulic Brake Clutch Master Cylinder Reservoir Lever Fit 50cc-300cc Sport Bike Street Bike Scooter (1 Pair, Red)

  • ★Universal Applications - Fit on most brand 50cc. to 300 cc. Sport bike/Street bike/Scooter with 7/8" (22mm) Standard Handle bars..
  • ★High Quality - Levers are made of CNN 6061 Aluminum Alloy and anodized in the same color as the cap of the brake fluid reservoir, two-finger short levers with 6-position adjusters..
  • ★Fitment - Suits for Honda, for Kawasaki, for Yamaha, for Suzuki, For Ducati etc..
  • ★Features - 12.7mm piston bore size universal standard 7/8" (22mm) dual hydraulic front brake master cylinder & clutch perch with adjustable levers and fluid reservoir full kit..
  • ★You'll Get - 1 Pair Of Hydraulic Brake Master Cylinder & Clutch Lever.
Check Stock

G109417 Hydraulic Cylinder Seal Replacement Kit Fit for Case 650 850D 855D W30, 35C 35CWL 580D 580E 580G 580SD 580SE (Fits Rod: 1.75\; Bore: 3.25\)

  • APPLICATION: The G109417 gasket kit fit for (850D/855D) - case long track crawler tractor (1/85-12/94): (8-062) - G101214 and G101215 ripper cylinders.
  • (650) - case crawler tractor (1/90-12/91): (8-34) - ripper cylinders - G101214 and G101215.
  • (W30) - case wheel loader (1/82-12/89): (5-22) - G106342 and G106343 steering cylinders.
  • (35C/35C WL) - backhoe (1/88-12/94): (8-72) - G106168 boom cylinders..
  • APPLICATION: Fit for (580E) - case construction king loader backhoe (1/83-12/89): (470) - G106168 backhoe boom cylinder.
  • (580SE/580SD) - case super-e construction king loader backhoe (1/83-12/87).
  • (580D) - case construction king loader backhoe (1/80-12/84): (402) - G101177 backhoe boom cylinder, (404) - G105400 and G106168 backhoe boom cylinder.
  • (580G) - case construction king loader backhoe (1/78-12/88): (328) - backhoe boom cylinder..
  • MATERIAL: Made of superior rubber, polyurethane and steel, treated with high temperature resistance, anti-corrosion treatment, sturdy and durable..
  • PACKAGE INCLUDE: The gasket seal kit contain 10 hydraulic cylinder seals and a screw..
  • Satisfaction Guarantee--100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product..
Check Stock

Kit King - Case 128725A1 Hydraulic Cylinder Seal Kit Aftermarket, 90XT 450 1530B 1835B 1838 1840 1845 W14B W14C

  • Case 128725A1 Hydraulic Cylinder Seal Aftermarket Kit by Kit King USA.
  • 1.5 Inch Rod & 2 Inch Bore. Typical Cylinder Function: Lift, Steering & More.
  • Equipment Type: Loaders, Track Loaders, Skid Steers, Uni Loaders, Wheel Loaders & More.
  • Case Models: 90XT, 450, 450CT, 1530B, 1835B, 1835C, 1838, 1840, 1845, 1845B, 1845C, 1845S, 1845LL, W14B, W14C & More..
  • Compatible Cylinders: 117824A1, 117903A1, 129011A1, G100295, G106818, G109773, G109777, G110666, G37917 & More.
Check Stock

Niceday Hydraulic Rowing Machines for Home Use with 16-Level Adjustable Resistance and 300 LB Loading Capacity

  • 【Activate Whole Body Muscle】Niceday hydraulic rowing machine can effectively mobilize the entire body's muscles. Compared with ordinary exercise equipment, it burns more calories and brings users outstanding workout effects in limited exercise time, which is the best choice for the legs, abdomen, back, and arms muscle strengthening, while helping to improve and enhance cardiopulmonary function..
  • 【45.3IN Slide Rail & 300LBS Loading Capacity】Benifits from the 1.2IN thicken quality carbon steel pipe, the Niceday rowing machine improves its loading capacity up to 300LBS. Meanwhile, despite being in a limited size of 57.1x25.9x21.7in, the exquisite proportions created a 45-inch ultra-long slide rail, compatible with users under 6'2"..
  • 【16 Adjustable Resistance】Niceday rower adopts an enlarged hydraulic cylinder as a resistance source, providing a higher tension value and 16 resistance choices, meeting the needs of both beginner and advanced users..
  • 【More Durable Hydraulic Cylinders】The hydraulic resistance will reduce due to the hydraulic cylinder's fixed physical heat generation after a period of use. T....
Check Stock