ReviewsHydraulic Damper

Duct Outlet 6\ Damper Sleeve w/ 1.5\ Stand-Off, 3/8\ Rod HVAC

  • 6" Damper Sleeve w/ 1.5" Stand-Off, 3/8" Rod HVAC.
  • 1½” Stand-Off for the locking Damper Handle.
  • 20 Gauge Galvanized Damper Blade with 3/8" Rod.
  • Crimped on one end to fit inside next ducting section.
Check Stock

Assault Racing Products 8000170 7.5\ LT-1 Chevy Harmonic Damper LT1

  • Self-adhesive strip adheres to the Crank Vibration Damper.
  • Spark advance up to 60 Degree instead of only 10 Degree-15 Degree as on chain case timing tab.
  • Genuine Mopar Performance P4529070AB Damper Degree Timing Tape.
Check Stock

Tamiya 86012 Paint Spray, Silver

Check Stock

Innovala PI164-GR25, 25PACK Pin Damper Soft Close Cabinet Door, 25 Pack, Aluminized ABS

  • Mounts easily with only one screw into the cabinet corner on the hinge side.
  • Only one unit needed for most applications. Surpass kcma requirements.
  • Screw and mounting instructions included.
  • No pilot hole drilling necessary. Comes with self-tapping screw.
  • Note: Mount the damper on the side of the door where the hinge is mountedDescriptionOur product Innovala is a German manufactured soft closing damper for kitchen & bath cabinet doors. Innovalas damper program is an innovative product that has been sold to the us cabinet and retail industry since 2008. We have sold millions and have been copied many times. We are the exclusive wholesale and retail distributor for the north American market. Its very simple to install our Innovala soft close dampers. First you need to make sure that your cabinet hinges are self-closing. In order to find this out, just open your cabinet door a couple of inches and let it go. If your door closes it has self-closing hinges, if it does not close and stays open your cabinet hinges are not self-closing and not one soft close damper in the market will work. Now you need to find the right location to install the damper. Always use the top corner closest to the hinge. Our instal....
Check Stock

TFL3Z-99406A10-A ailgate Assist,Tailgate Damper Shock Assembly Kit ,Fits for Ford F-150 2015, 2016, 2017, 2018, 2019,Tailgate Assist Shock Strut,Lift Support Kit,Replaces# FL3Z99406A10A

  • ...ailgate shock is precisely engineering designed with integrated shock absorber, which works with the existing tailgate cables to facilitate a slow, consistent and smooth lowering. No more slamming down tailgate,The tailgate shock assembly has went through extensive testing, means you will get a fairly reliable gate damper to control the drop rate of the gate to prevent harm to the vehicle body.This kit safely lowers the tailgate in a slow and controlled manner..
  • ★ High Quality: Normal wear and tear from use is already an issue with tailgate damper kit, but bumpy roads and potholes can also grate on the alignment of your trucks gate as well. Made from high-quality and extensively tested stainless steel, this damper will not just protect your limbs from damage but will also save the integrity of your tailgate..
  • ★ This tailgate damper kit can be installed easily in the passenger side and will require you to remove two T50 bolts to remove and replace the roller. The damper shock or strut installs behind the passenger tail light and the angled part of the damper shock snaps into the mount from the bed while the straight part mounts into the new roller that came with the kit..
  • ★ 100% Satisfactory service, if you have any questions, please feel free....
Check Stock

Yoursme 77080 19mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Removal Holding Spanner for Honda and Acura Engines

  • 【19mm Harmonic Balancer Socket】Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Install/remove Honda 19mm damper....
  • 【Using of 19mm Tool】OAL 89mm, Used with 1/2” square drive.Designed with more than 3 x the mass of standard impact sockets to reduce flex and....
  • 【50mm Removal Holding Spanner】Fits for Honda (most) and Acura engines. Used to maintain the harmonic damper pulley position while....
  • 【Using of 50mm Tool】Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating....
  • 【Premium Support: 】Our focus on products and customer services is 2nd to none. We provide friendly 1 years’ warranty support, easy-to-reach....
Check Stock

1 Pair Heavy Duty Drawer Slides 22 inch Soft Close Ball Bearing Drawer Slides - LONTAN 4502S3-22 Drawer Rails Heavy Duty 100 LB Capacity Full Extension Drawer Slides

  • ※ Soft Close: The drawer slides equipped hydraulic damper which allows the slides achieve soft close effect. Double spring design make less noise when close and open, create a warm and quiet family environment for you..
  • ※ Material :LONTAN drawer slides are made of high grade cold-rolled steel with zinc plated finish, heavy-duty and durable, load-bearing. Solid ball bearing ensure sooth opening and closing, can serve you many years. You would feel the quality when you receive..
  • ※ Double Anti-drop: LONTAN drawer slides have double anti-drop function. It would prevent drawer separate from cabinets. Easy to take down and clean..
  • ※ Measurements: Length:22inch(550mm).
  • Load-bearing capacity: 100 LB. Please choose the right size before you purchase..
  • ※ Excellent After-Sale Service: We focus on quality and after-service. If you find any quality problem on our drawer sides, please feel free to contact us, we promise solve it until you are satisfied. Replacements or other solutions would be provided for you. No risk..
Check Stock

Tamiya 56336 RC King Hauler Black Edition

Check Stock

Soft Close Drawer Slides 22 Inch Cabinet Drawer Slides 10 Pairs - LONTAN Ball Bearing Drawer Slides Heavy Duty Full Extension Drawer Slides Dresser Kitchen 100 LB Capacity

  • ※ Soft Close: The drawer slides equipped hydraulic damper which allows the slides achieve soft close effect. Double spring design make less noise when close and open, create a warm and quiet family environment for you..
  • ※ Material :LONTAN drawer slides are made of high grade cold-rolled steel with zinc plated finish, heavy-duty and durable, load-bearing. Solid ball bearing ensure sooth opening and closing, can serve you many years. You would feel the quality when you receive..
  • ※ Double Anti-drop: LONTAN soft close drawer slides have double anti-drop function. It would prevent drawer separate from cabinets. Easy to take down and clean..
  • ※ Measurements: Length:22inch(550mm).
  • Load-bearing capacity: 100 LB. Please choose the right size before you purchase our heavy duty drawer slides..
  • ※ Excellent After-Sale Service: We focus on quality and after-service. If you find any quality problem on our ball bearing drawer slides, please feel free to contact us, we promise solve it until you are satisfied. Replacements or other solutions would be provided for you. No Risk..
Check Stock

Dundas Jafine DRB4XZW Recessed Dryer Vent Box, 4\

  • Spring loaded damper system offers complete noise control with no flapping louvers or dampers during inclement weather.
  • When the dryer, bath fan, or exhaust is turned on, the air forces the damper open allowing the air to exhaust..
  • When appliance is turned off, the damper is pulled to a secure, closed position.
  • UV resistant coating to prevent the cap from discoloring.
  • Paintable to match the exterior of your home.
Check Stock

6 Pairs LONTAN 22 Inch Soft Close Drawer Slides Dresser Drawer Slides - Heavy Duty Drawer Slides Metal Ball Bearing and Full Extension Cabinet Drawer Slides Kitchen 100 LB Capacity

  • ※ What you get: You would get 6 pairs of 22in drawer slides, enough for 6 drawer, mounting screws and instruction which make installation easier. Each drawer slides wrapped individually with fine package. Moreover, you would get smoother drawers.
  • ※ Soft Close: The drawer slides equipped hydraulic damper which allows the slides achieve soft close effect. Double spring design make less noise when close and open, create a warm and quiet family environment for you.
  • ※ Easy to install: Our drawer slides are fitted with nylon detachable snaps for easy installation or removal of the drawer slides. You only need to gently press the buckle, which is convenient and labor-saving.
  • ※ Measurements: Length:22inch(550mm).
  • Load-bearing capacity: 100 LB. Please choose the right size before you purchase.
  • ※ Excellent After-Sale Service: We focus on quality and after-service. If you find any quality problem on our drawer sides, please feel free to contact us, we promise solve it until you are satisfied. Replacements or other solutions would be provided for you. No risk..
Check Stock