ReviewsHydraulic Double Flaring Tool

Bonvoisin Flaring Tool 1/4”-3/4” HVAC Single Flare Tool 45° Eccentric Tube Flaring Tool with Clutch Limit Piece for Copper Aluminum Tubing (one piece)

  • [Eccentric Type Cone] - The eccentrically mounting hardened steel flaring cone produces a rolling action for even metal flow, giving uniform flare walls without wear. Applicable tube outer diameter: Φ1/4 ", 5/16", 3/8 ", 1/2", 5/8 ", 3/4".(NOTE: It will only do single flare - not double flare!).
  • [Limit Piece & Clutch] - (1)After inserting the copper tube, the length of the flared tube can be precisely limited by the limit piece, which is more efficient and convenient than measuring by eyes only. (2)There is a clutch in the rotating handle, which will automatically disconnect when the flaring operation is completed..
  • [Ultralight] - The tubing flaring tool is made of aluminum alloy and is very light. It's less than 1kg, so you can hold it and work for a long time without getting tired..
  • [Wide Application] - The tube flaring tool is applicable to soft metal tubes such as copper tubes / aluminum tubes. Widely used in electrical products, like HVAC, air conditioners, air heaters, refrigerators, etc..
  • [Packing List] - This flare tool includes the gantry * 1, inch-type flaring clamp * 1 (without a case)..
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock

HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubin

  • HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubing.
  • This is a heavy duty steel Flaring and Swaging Tool Kit for flaring and Swaging copper tubing.With this Flaring and Swaging Tool Kit you can flare or....
  • Copper tubing flaring tool + copper tubing swaging kit in a combination tubing flaring./swaging kit to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.....
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation Self centering, slip-on forged steel yoke Blow....
Check Stock

Mastercool 72485-PB Custom Molded Plastic Case for Model 72475

  • For use with 72475 Universal Hydraulic Flaring Tool Set.
Check Stock

Shankly Flaring Tool Set 9 Piece - Professional Grade Heavy Duty Brake Line Flaring Tool Kit and Swage Tool Flare Tool with Tubing Straightener or Cutter Not a Double Brake Flaring Tool

  • ✅ ALL-INCLUSIVE KIT: Shankly's standard flaring tool kit includes an all-inclusive professional tubing straightener or cutter, allowing the mechanic....
  • ✅ PRECISE AND CONVERTIBLE: This brake line flaring tool swivel-type swaging adapters and flaring cones are made of the strongest steel materials and....
  • ✅ MULTIFUNCTIONAL FLARE ADAPTERS: This is the only flaring tool set a mechanic will require because it includes flaring tool adapters in the....
  • ✅ FITS YOUR APPLICATION: Shankly's flaring tool or brake line tool includes five swage fittings and several useful tube sizes: 3/16”, 1/4”,....
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this heavy-duty brake line flaring tool or brake tool....
Check Stock

ARES 18019 - Double Flaring Tool Set with Extra Adapters- Use on Copper Aluminum Soft Steel Brake Line and Brass Tubing - Includes Mini Tubing Cutter and Storage Case

  • INCLUDES: This Double Flaring Tool Kit includes one 1/4-inch adapter, a 5/16-inch adapter, and a 1/2-inch adapter and two adapters in each of the....
  • QUALITY: The forged yoke is constructed from premium Heat Treated Steel, and the swivel is constructed of alloy steel with chrome plating to assist in....
  • APPLICATIONS: This versatile Double Flaring Tool kit can be used when flaring a double or a single flare in copper, aluminum, brass, magnesium, and....
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your....
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet,....
Check Stock

VEVOR Brake Line Flaring Tool, 37 & 45 Degree Single, Double, and Bubble Flares for 3/16', 1/4', 5/16' and 3/8' Tube Size, Suitable for Soft Metal of Copper Lines

  • Four Tube Expanding Size: This brake line flaring tool includes 4 dies in the following sizes: 3/16 inch (4.75mm), 1/4 inch (6.35mm), 5/16 inch (8 mm), 3/8 inch (9.5 mm). It creates 37° and 45° single, double, and bubble brake flares in seconds. Reduce the friction on flares to ensure your vehicle operates at optimal performance..
  • Applicable Materials: This double flare brake tool is suitable for expanding copper and aluminum piping. It is an excellent tool for repairs on vehicles or taking lines off of a vehicle. Whether you're working on brake lines, transmission cooler lines, or fuel lines, our flaring tool will help you create the flares you need quickly and easily..
  • Leakproof Connection: With the turret-style design, the professional brake line flaring tool keeps all your dies ready. They are available and within immediate reach with the convenient turret carrier, greatly saving you the hassle of fumbling for small parts or losing them..
  • Vise-Mounted: The brake line flare tool is compatible with a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under a car). The 6.3-inch (16 cm) T-handle screw clamp can hold the die and tube in place firmly without vibration. After repairing, your vehicle will be ....
Check Stock

4LIFETIMELINES Flaring Tool – Professional Turret Brake Line Flare Tool – 5 Tubing Sizes – Compatible with Stainless Steel Copper Coils

  • 5 TUBING SIZES: The 4LIFETIMELINES heavy duty turret brake line flare tool allows you to create 45 degree highly precise double, single and bubble flares in 5 sizes of tubing, 3/16″, 1/4″, 5/16″, 3/8″ and 4.75mm..
  • COMPATIBLE MATERIALS: This brake flaring tool can work with stainless steel, steel and nickel copper tubing, being a smart and practical solution for brake lines, fuel lines and transmission cooler lines..
  • EASY TO USE: Unlike similar products on the market, this professional flaring tool features a quick-release T handle ensuring fast holder die changeovers for a smooth and user-friendly experience..
  • CONVENIENT TURRET CARRIER: Keep all your dies ready, available and within immediate reach with the convenient turret carrier, which saves you the hassle of groping for small parts or losing them!.
  • PRECISION IS KEY: Keep your brake flares and brake system safe and at optimal length with this highly precise and accurate flaring tool, which requires minimal time, effort and cost!.
Check Stock

Shankly Flaring Tool Set 10 Piece - Professional Grade Heavy Duty Brake Line Flaring Tool Kit and Swage Tool Flare Tool with Tubing Straightener or Cutter Not a Double Brake Flaring Tool

  • ✅ ALL-INCLUSIVE KIT: Shankly’s standard flaring tool kit is all-inclusive, complete with a professional tubing straightener or cutter, allowing....
  • ✅ MULTIFUNCTIONAL FLARE ADAPTERS: Flaring tool adapters range from the following sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", making....
  • ✅ FITS YOUR APPLICATION: Shankly's flaring tool or brake line tool includes five swage fittings and several useful tube sizes: 3/16”, 1/4”,....
  • ✅ PRECISE AND CONVERTIBLE: This brake line flaring tool swivel-type swaging adapters and flaring cones are made of the sturdiest steel materials and....
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this heavy-duty brake line flaring tool or brake tool....
Check Stock

Amerbm Professional Brake Line Flaring Tool 45 Degree Set Single Double and Bubble Flares Tool Kit for Steel Copper Tube

  • 45-degree tool set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16", 1/4", 5/16", 3/8" diameter lines..
  • This flaring tool is designed to be mounted in a vise, and the T-handle screw clamp securely keeps the die and tubing in place, so you can create flares quickly and easily..
  • The "turret-style" design allows you to make those precision flares in a minimal time, which saves you the hassle of groping for small parts or losing them..
  • When building car brake lines, the brake flaring tool kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises..
  • The flaring tool set is made of durable steel for reliable and long-lasting performance, high precision and safe to use. With a plastic case, compact and convenient to carry and store..
Check Stock

Eastwood 37 Degree Flare Die Set for Professional Brake Tubing Flaring Tool

  • Add These 37-Degree Flare Dies To Our Pro Brake Tubing Flaring Tool So You Can Do Even More..
  • Put 37-Degree Flares On 3/16", 1/4", 5/16" And 3/8" Tubing.
  • 37-Degree Flares Are Used In Many Custom, Hydraulic And Military Applications Where An- Or Jic-Type Fittings Are Used.
Check Stock