ReviewsHydraulic Fittings

ZELCAN 64 Pc Hydraulic Hose Tube and Pipe Fitting Kit, 37 Degree JIC Cap and Plug Assortment Kit, Heavy Duty Seal Adapter Set w Precision Threading, Steel Flare Fitting Set, Dash Sizes 4 6 8 10 12 16

  • 64 Fittings: This 64-pc. JIC hydraulic cap and plug kit gives you plenty of fittings in the 6 most commonly needed dash sizes: -04, -06, -08, -10, -12, and -16.
  • Superior Quality: Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments.
  • Easy to Use: These JIC caps and plugs have precision-engineered standard threading to install smoothly, seal your hoses, tubes, and pipes hermetically, and come off cleanly.
  • Easy to Organize: This tool set's blow-molded case has a chart for easy identification of the various sizes and foam lining to protect your pieces from wear in transit.
Check Stock

ZELCAN 64 Piece ORFS Cap & Plug Kit Hose Tube and Pipe Hydraulic Fitting Set O-Ring Face Seal Cap and Plug Kit Galvanized 45# Steel with Precision Threading Sizes 4 6 8 10 12 16

  • 64 FITTINGS---This 64-piece ORFS hydraulic cap and plug kit by Zelcan gives you plenty of fittings in the 6 most commonly needed sizes: ORFS 4, 6, 8, 10, 12, and 16..
  • SUPERIOR QUALITY---Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments..
  • EASY TO USE---These ORFS caps and plugs have precision-engineered standard threading to install smoothly, seal your hoses, tubes, and pipes hermetically, and come off cleanly..
  • EASY TO ORGANIZE---This tool set's blow-molded case has a chart for easy identification of the various sizes and foam lining to protect your pieces from wear in transit..
  • SATISFACTION GUARANTEED---Our ORFS cap and plug set comes backed with ZELCAN's strong warranty and friendly customer service to assure you that you'll be able to use this kit for years to come..
Check Stock

Jagwire Needle Driver 2.0, Fitting Insert Tool

  • Allows for easy and gentle insertion of hose fittings.
  • Installing hydraulic hose fittings shouldn't be done using a hammer.
Check Stock

Apache 39004375 1/2\ Male Pipe x 1/2\ Female Pipe Swivel, Hydraulic Adapter

  • 10 pack of FJX-08-08 female swivel hydraulic hose fittings..
Check Stock

TrackStar Turnigy 13.5T Sensored Brushless Motor 3040KV Roar Approved

  • Premium Material: The hydraulic steering helm comes with high-strength aluminum alloy material, which is lightweight, anti-aging, corrosion-resistant,....
  • Optimal Hose Fitting: The adjustable stainless steel O-ring fittings will simplify the installation process and allow for simple reorientation after....
  • Considerate Details: The hydraulic helm pump is equipped with the replaceable shaft seal, the built-in lock valve, relieve valve, and air pocket.....
  • Complete Accessories: The hydraulic steering pump has a complete accessories kit for durable structure. It includes ball bearing piston race,-5 ORB....
  • Wide Application: This outboard helm pump is suitable for boats rated to a maximum of 300 HP. It can be used in mechanical/manual steering for yachts,....
Check Stock

Manual Hydraulic Multiplier, SCV Splitter/Diverter Valve with Couplers and Ag Fittings

  • Manually operated valve multiplies your existing hydraulic outlets and allows you to control 2 circuits..
  • Handle rotates 45 deg to switch between Circuit 1 and Circuit 2.
  • Capacity for up to 20 GPM Hydraulic Flow & 3000 PSI.
  • Adjustable adapter fittings allow you to plug directly into your tractor's SCV port.
Check Stock

1/2\ Skid Steer Bobcat Flat Face Hydraulic Quick Connect Couplers w Dust Caps,1/2\ NPT Thread+ 1/2 Body Hydraulic Couplers for Skid Steer Bobcat Case/Kubota/New Holland

  • The flat face hydraulic couplers with 1/2" NPT thread+ 1/2 body. The hydraulic quick connect coupler is an ISO 16028 flat face style, fits all standard flow skid steers attachments. Impoved design high flow performance and maximum service life..
  • The universal hydraulic quick disconnect coupler & plug interchange with most models of skid steers loaders including Bobcat Case / New Holland, Kubota couplings which made to ISO 16028 standard.
  • Applications:This flat face couplers connect used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,construction，industrial hydraulic lines..
  • The flat face hydraulic quick connect couplers is valve design and structure for minimize pressure adrops and fluid losses. Sleeve locking mechanism prevents accidental disconnection..
  • Our bobcat skid steer hydraulic couplers are made by heavy duty harden steel construction with zinc nickel plating for superior corrosion resistance. 5076 PSI Rating , 12-23 GPM Flow Rate. Warm Tips: Make sure relieve all pressure on the skid steer from the lines before connect/disconnect them.Just line up the flat faced hyd fittings and push couplers to gather,male to female, female to ma....
Check Stock

VEVOR Hydraulic Hose 3/8 inch x 100 ft, Coiled Hydraulic Hose 4800 PSI, Rubber Hydraulic Hose with 2 High-Tensile Steel Wire Braid, Bulk Hydraulic Hose -20°C to 140°C, Hydraulic Oil Flexible Hose

  • 【DURABLE MATERIAL】- The innermost tube and the outer protective cover are constructed of synthetic rubber. The outermost is cover by fabric. The inner material is two high-tensile steel wire braid reinforcement layers..
  • 【100 FT HYDRAULIC HOSE】- The coiled hydraulic hose is 100 ft long in total, the inner diameter is 3/8 inch, and the outer diameter 3/4 inch. With a 4800 PSI working pressure, the hydraulic line is explosion-proof..
  • 【HIGH STRENGTH】- The bulk hydraulic oil hose is constructed of synthetic rubber to resist oil and chemicals, while the outer cover also protects the hose from weather, ozone, abrasion, and corrosion..
  • 【INCREDIBLE FLEXIBILITY】- Wire hose layers provide flexibility and versatility to allow you to install your rubber hose and hydraulic fittings in tight quarters for less vulnerability. It can work between -40 °C and 121 °C..
  • 【VARIOUS USES】- The hose is suitable to carry petroleum, mineral oils, emulsion, hydrocarbons, and water-based hydraulic fluids. It is ideal for construction, agriculture, and other machinery that uses a hydraulic system..
Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

  • Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
  • Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
  • Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
  • Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
  • Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check Stock

VEVOR Hydraulic Pipe Crimping Tool Copper Crimping Pliers with Jaws 1/2 12.7mm 3/4 19.05mm 1 25.4mm 10T Hydraulic Copper Tube Fittings Crimper 40CR Steel for Copper Tube Plumbing and Fitting

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping....
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This....
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an....
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic....
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied....
Check Stock

Hydraulic Multiplier, SCV Splitter/Diverter Manifold Valve Kit with Couplers and Switch Box Control, Turn 1 Circuit into 2 Circuits!

  • Allows another set of hydraulic outlets to your equipment and control 2 circuits or functions from the lever in your cab.
  • Simple installation and transfers easily to multiple units.
  • Capacity for up to 20 GPM Hydraulic Flow & 3000 PSI Hydraulic Systems..
  • Rocker switch allows you to select either circuit one or circuit two. The light on the switch indicates which circuit is activated. Push the button on the side to activate both circuits to allow operation of both circuits at the same time..
  • MADE IN USA - Includes Eccentric fittings to allow mounting directly to your tractors remote outlet.
Check Stock