ReviewsHydraulic Flange

Hayward W3C4030 SwimClear Cartridge Pool Filter 425 Sq Ft.

  • ECONOMICAL PERFORMANCE: The Hayward SwimClear 425 sq. ft. pool filter provides excellent filtration and hydraulic performance for reduced cost of operation.
  • NO BACKWASHING REQUIRED: Cleanable cartridge elements eliminate the need for backwashing.
  • DURABLE DESIGN: Filter tanks are made from the most durable materials to meet the demands of the toughest applications and environmental conditions.
  • EASY TO USE: Heavy-duty, single-piece flange clamp is tamper-proof and securely fastens tank top/bottom, allowing quick access to all internal components.
  • RAPID AIR RELEASE: High-capacity manual air relief valve releases air with a quick quarter-turn.
Check Stock

Val-Pak V60-105 Hayward DEX2400C Filter Manifold with Air Bleed Replacement.

  • ECONOMICAL PERFORMANCE: The Hayward SwimClear 425 sq. ft. pool filter provides excellent filtration and hydraulic performance for reduced cost of operation.
  • NO BACKWASHING REQUIRED: Cleanable cartridge elements eliminate the need for backwashing.
  • DURABLE DESIGN: Filter tanks are made from the most durable materials to meet the demands of the toughest applications and environmental conditions.
  • EASY TO USE: Heavy-duty, single-piece flange clamp is tamper-proof and securely fastens tank top/bottom, allowing quick access to all internal components.
  • RAPID AIR RELEASE: High-capacity manual air relief valve releases air with a quick quarter-turn.
Check Stock

Caplugs 99394887 Plastic Tapered Cap and Plug with Wide Thick Flange WW-21, PE-LD, Cap OD 1.857\ Plug ID 2.048\

  • Designed to be used as a cap or plug and can be used in many applications.
  • Tapered design provides a range for the parts to fit in components, wide and thick flange for added protection and prevents from being pushed through when used as a plug.
  • Flanged for easy installation and removal.
  • May be used for mil stud, sae-type hydraulic threaded or non threaded fittings.
Check Stock

Exhaust Headers Manifold 1-5/8 in. Mild Steel for 2002-2013 Silverado Sierra Suburban Tahoe Yukon Escalade 4.8L 5.3L 6.0L 6.2L V8

  • Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes.
  • Most efficient at providing horsepower gain from idle to mid-range RPM.
  • Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) cold roll flash mild steel.
  • Head flange laser-cut from 3/8-inch (9.5mm) thick steel plates and flattened by hydraulic press.
  • All joints TIG welded for great resistance against cracking and wearing.
  • Hi-temp paint that holds up to 500C or 932F.
Check Stock

Exhaust Headers 1-5/8 x 2-1/2 inches Mild Steel Black Paint for 1988-1999 C1500 C2500 K1500 K2500 Silverado Sierra | 1992-2000 Suburban Tahoe Yukon | 305 350 5.0L 5.7L V8

  • Full length pipe layout for power gain at mid to high RPM.
  • Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) cold roll flash mild steel.
  • Head flange laser-cut from 5/16-inch (8.0mm) steel plates and flattened by hydraulic press.
  • All joints TIG welded for great resistance against cracking and wearing.
  • Hi-temp paint that holds up to 500C or 932F.
Check Stock

POWERGO MOTORSPORT 2811642419 Exhaust Turbo Manifold Ram Horn T3 44mm W/G Schedule 40 304 Stainless Steel for Integra Civic 1.6L 1.8L B16 B18 DOHC VTEC

  • Tubular manifold design with separate tube for each cylinder, for better exhaust flow and more top end power.
  • Equal length runners for balanced exhaust reversion and enhanced turbo performance.
  • Built with 3.0mm thickness (schedule 40) precast 304 stainless steel pipes.
  • designed for high output setups with up to 800whp.
  • Head flange laser-cut from 1/2 in. (13.5mm) thick steel plates and flattened by hydraulic press.
  • all joints TIG welded for great resistance against cracking and wearing.
Check Stock

FSW1008 LUXURY 33-INCH SOLID FIRECLAY FARMHOUSE SINK IN WHITE, STAINLESS STEEL ACCS, FLAT FRONT

  • ...aining higher concentrations of quartz (silica) than typical ceramic (kaolin) clays. We source our fireclay base material from mines following reduced-input/output (more sustainable) mining practices in Italy, France and Israel. Once at our factory (in Turkey), the clay is rehydrated, then molded via a 50,000-pound hydraulic press..
  • FINISH: This sink features Fossil Blu’s legendary silica-based glossy white glaze, which is similar to "Appliance" white with neither a warm nor cool tint. During firing, the silica of the glaze fuses with the silica of the substrate, thereby creating an incredibly durable single structure. This “single structure” is what separates fireclay from typical/inexpensive ceramic products, which are fired at lower temperatures, exhibit little fusing, and are thin and/or hollow structures..
  • SHAPE: With a total of over 550 square inches of interior sink workspace, Fossil Blu's 36" sinks are designed to be the workhorse of the kitchen. The flat-front apron provides a clean and classic look with the rectangular shape itself being the design. Characteristic of the natural fireclay material underneath, the sink has soft edges and a supple overall appearance..
  • INCLUDED ACCESSORIES: One (1) custom-fitted sink grid, one (1) basket str....
Check Stock

POWERGO MOTORSPORT 2811642409 Exhaust Turbo Manifold Ram Horn T3 35/38mm W/G Schedule 40 304 Stainless Steel for Integra Civic 1.6L 1.8L B16 B18 DOHC VTEC

  • Tubular manifold design with separate tube for each cylinder, for better exhaust flow and more top end power.
  • Equal length runners for balanced exhaust reversion and enhanced turbo performance.
  • Built with 3.0mm thickness (schedule 40) precast 304 stainless steel pipes.
  • designed for high output setups with up to 800whp.
  • Head flange laser-cut from 1/2 in. (13.5mm) thick steel plates and flattened by hydraulic press.
  • all joints TIG welded for great resistance against cracking and wearing.
Check Stock

POWERGO MOTORSPORT 1152403820 1-1/2 x 2-5/8 inches 304 Stainless Steel Shorty Headers for C1500 C2500 K1500 K2500 Suburban Blazer Jimmy Tahoe Yukon | 5.0 5.7 305 350 V8

  • Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes.
  • Most efficient at providing horsepower gain from idle to mid-range RPM, which brings excitement to street driving and is ideal for street racing.
  • Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) 304 stainless steel.
  • Head flange laser-cut from 7/16 in. (11.5mm) thick steel plates and flattened by hydraulic press.
  • Polished surface for extra resistance against rusting.
  • all joints TIG welded for great resistance against cracking and wearing.
Check Stock

BUSY-CORNER 4C-4782 Seal O-Ring Kit, Nitrile 90, Hydraulic Hose Fitting Orings, Fits CAT Caterpillar Excavator 2701528 4C4782 Replacement

  • High Quality:Made of Buna-N 90D (NBR) material,are durable,high temperature resistance,anti static,oil resistant,UV resistance,heat resistant,wear resistant,exceptionally suited for high pressure applications..
  • Multi Size:You can get a good selection of 32 different CAT OEM part numbers oring in this kit,can meet almost all your needs..
  • Wide Application:This Kit use for sae stor & orfs fittings,code 61/62 flange O-Rings,Caterpillar hydraulic hose fitting oring..
  • Handy Packing: Comes with a heavy duty storage case that keeps each size o rings separated and organized,that makes more convenient to carry, select and collect..
  • Customer Service: You are unhappy for any reason, return your kit with no questions asked and we will provide a full refund..
Check Stock

Exhaust Headers 1-1/2 in. 304 Stainless Steel Polished Finish for 88-95 C1500 C2500 K1500 K2500 Silverado Sierra 92-95 Suburban Blazer Jimmy Tahoe Yukon 305 350 cu. in. 5.0L 5.7L

  • Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes.
  • Most efficient at providing horsepower gain from idle to mid-range RPM.
  • Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) 304 stainless steel.
  • Head flange laser-cut from 7/16-inch (11.5mm) thick steel plates and flattened by hydraulic press.
  • All joints TIG welded for great resistance against cracking and wearing.
  • Polished surface for extra resistance against rusting.
Check Stock