ReviewsHydraulic Flaring Tool Kit

LIAMTU Tubing Flaring Tools Kit Heavy Duty Steel Swage Tool Set Include Pipe Cutter & Ratchet Wrench

  • ALL INCLUSIVE KIT: LIAMTU tubing flaring tools kit includes all the parts to finish a tubing flaring&swaging work.
  • WIDE RANGE OF APPLICABILITY: this flaring kit can finish 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. tubing flaring work.
  • HIGH HARDNESS MATERIALS: the flaring tool, pipe cutter and ratchet spanner are made of the sturdiest steel materials and chromed finished for easy....
  • SELF-CENTERING YOKE: two bars included covering nine sizes with a self-centering, slip-on forged steel yoke to help form professional and quality....
  • EASY TO CARRY: all parts can be put into a blue color hand carrying plastic case.
Check Stock

HVAC Flaring Tool Kit for 1/4 - 3/4 Copper Pipe Flare Tool 45°Eccentric Single Tubing Flaring Tool with Pipe Cutter & Deburring Tool for Copper Aluminum Pipes Refrigeration Air Conditioner Repair

  • The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
  • Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
  • The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
  • The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
  • Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..
Check Stock

YAETEK Swaging Tool Kit – Flaring Tool Kit - Tube Cutter Rachet Wrench Swag Tool - 45 Degree Brake Line Tubing Brass Aluminum Copper Extrusion 1/8 to 3/4 for HVAC Water Gas Pipe Automotive Plumbing

  • Sizes of This YaeTek Swaging Flaring Tool Kit: Flare adapters 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" OD.
  • Material: Swivel is made of alloy steel, chrome-plated to assist in reducing friction.
  • Yoke is heat-treated forged steel with max strength and....
  • Do your Brake Line Job: This YaeTek Flaring Swaging Tool Kit 10pc Tubing Flaring Kit includes 2 bars (9 sizes) with a self-centering, slip-on yoke to....
  • A CompleteFlaring Tool kit with necessary tools to complete your job.
  • This Tool makes 45 Degree Flares on soft copper, brass, aluminum and mild steel....
  • Package includes flare adapters, swage fittings, refrigeration wrench to open square valves on hose bibs and acetylene tanks, with a Plastic carrying....
Check Stock

Fairmount Hydraulic Flaring Tool Set Expander Fuel Line Flare Metric Bubble

  • The Fairmount Hydraulic Flaring Tool Provides The Ability To Produce Repeatable, Perfect, Oe-Precision Brake And Fuel Line Flares In Steel And....
  • Works On 3/16 in., 1/4 in., 5/16 in., 3/8 in. & 1/2 in. Tubing.
  • Creates 45 Degrees Single And Double Flares.
Check Stock

Cal-Van Tools 166 Hydraulic in Line Flaring Tool 1 Pack,One Size

  • Combines features of inline flaring tool and a Hydraulic Flare tool to make a lightweight, low profile, easy to use tool.
  • Creates single, double and bubble Flares.
  • Fits into tight access areas allowing on car use.
  • Flare tubing sizes: SAE: 3/16", 1/4", 5/16", 3/8" metric: 4.75mm, 6mm, 8mm.
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock

TEMCo TH0370 Dimple Die Set Tool Kit 8pcs: 1/2' 3/4' 1' 1-1/4' 1-1/2' 1-3/4' 2' 2-1/2'

  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size).
  • This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372..
Check Stock

Eastwood 3/16 Die Kit Replacement Brake Line Tubing Flaring Tool 45-Degree Single Double and Bubble Brake Flares

  • Flare Punch Set For Eastwood Pro Brake Tubing Flaring Tool.
  • Direct Replacement For Your Worn 3/16” Die Set.
  • Restores Like New Performance To The Eastwood Pro Brake Tubing Flaring Tool.
  • This Kit Includes The Op1 Punch Die, The Op2 Punch Die And The 3/16 Inch Die Plates To Make A Complate Kit To Refresh The 45 Degree Turret Head.
Check Stock

Ambienceo 45 Degree Traditional Extrusion Type Flaring & Swaging Tool Kit OD Soft Copper Tube Cutter W/Carrying Case

  • Flares 9 Tube sizes: For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing.
  • 5 swage adapters that swage 7 tube sizes: 3/16",1/4",3/8",5/16",1/2",5/8"& 3/4" O.D.Tubing.
  • Copper tubing flaring tool and copper tubing swaging kit in a combination tubing flaring swaging kit to meet all your needs.
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation.
  • Self centering, slip-on forged steel yoke.
Check Stock

Mastercool 72485-PB Custom Molded Plastic Case for Model 72475

  • For use with 72475 Universal Hydraulic Flaring Tool Set.
Check Stock

Neiko 20657A ISO/Bubble Flaring Tool Kit

  • Designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
  • Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
  • Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
  • Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm.
  • Includes blow-molded carrying case for organization and storage.
Check Stock