ReviewsHydraulic Forging Press

NA Black Hydra Krimp 71500 AC Hose Crimper

The lightweight hand-held hydraulic press is very portable..
Crimping pipes and fittings in an easy and labor-saving way..
The kit is applicable for beadlocking fitting and barrier A/C hose..
The dies snap quickly into the press fixture requiring no pins or screws..
Wide Application: The hydraulic crimper is ideal for shop and field operations, crimping pipes and fittings in an easy and labor-saving way. Customize....

Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Right Hand 2pcs

Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree..
Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
Features: Large load rating, low noise, anti-corrosion, tough, and durable..
Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..

Check Stock

uxcell PHSB6 Rod End Bearings 3/8-inch Bore Pre-Lubricated Bearings 3/8-24 Female Thread Left Hand 2pcs

Type: 3/8" Bore x 3/8-24 left-hand female thread rod end. Maximum angular misalignment: 9 Degree..
Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity..
Features: Large load rating, low noise, anti-corrosion, tough, and durable..
Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..

Check Stock

uxcell POSB4 Rod End Bearings 1/4-inch Bore Pre-Lubricated Bearings 1/4-28 Male Thread Right Hand 2pcs

Type: 1/4" Bore x 1/4-28 right-hand male thread rod end. Maximum angular misalignment: 13 Degree..
Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life..
Capacity: 6.6KN Static Load Capacity, 4.5KN Dynamic Load Capacity..
Features: Large load rating, low noise, anti-corrosion, tough, and durable..
Application: Widely used in engineering hydraulic cylinders, forging machine tools, automation equipment, and so on..

Check Stock

CNCEST Press Heat Machine, 5T Hydraulic Jack Heat Press Machine 2.4X4.7 Inch Dual Heated Platens 900W Heat Press Plates w/Precise Pressure Gauge & LCD Controller for Efficient Press

【Wide Application】Hydraulic tech heat press machine is widely used for extraction of PU leather,plastic particles,dry flowers and plants.Maximize your starting material’s potential and desired outcomes. For each starting material, easily experiment and record your notes for future reference..
【High Quality Heat Plate】The heat press comes with 4cm thick solid aluminum heating element, uniform heating, and smooth surface, heating plate size 6*12cm (2.4"*4.7")..
【Manual Hydraulic Jack】The heat press machine is equipped with 5 tons manual hydraulic jack, high pressure pumping oil.
Continuously update the process, pass thousands of durability tests, continue to simplify operations,the convenient switch of heat press make it easier for you to use.
【Accurate LCD Controller】The controller box is movable, the heating speed is faster, and the touch LCD screen can accurately display the time and temperature, with good performance..
【Service Guarantee】Fast shipping from Amazon.
Satisfied problem solutions response within 24 hours.
Assured promise for return,replacement,refund based on quality & shipping problems(please keep efficient contact through amazon with us if needed)..

Check Stock

AMZCNC Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8" 3/16" Cable –Wire Swaging Tool 8 Ton and Stainless Steel Cable Cutter

Compatibility : Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power:10 tons. Stroke : 12mm. The hydraulic crimper is suitable for power wires, electrical cables, battery cables and welding cables. Cable Cutter Cuts up to 5/32" stainless steel cable..
Material: Made of durable materials with high strength and good toughness. Dies are made of hardened steel with chrome finish.Vinyl-dipped grip for comfort and easy control. Cable Cutter: Using SK5 high carbon steel Seiko forging, durable..
Size: Hydraulic Hand Crimper Tool: Length:approx.12.2 inches, Weight:approx.N.W3.8lb G.W6.6lb. Cable Cutter: 8.1 x 2.8 x 1.4 inches, Weight:11.2 ounces..
Easy to use: On/Off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire. A return spring is installed on the handle for easy one-handed operation of the tool.The C-style head makes side entry easier to change the dies..
What you get: Includes die positioning pin, seal rings, strong protective carrying case, cable cutter and pair of work gloves..

Check Stock

Dulytek Retrofit Heat Caged Plate Kit 3 x 8 Anodized Aluminum Plates for 15-30 Ton Hydraulic or Air-Operated Shop Presses

3" x 8" Dual Heating Insulated Plates For 15 - 30 Ton Hydraulic or Air-Operated Shop Press.
High Pressure Operation Makes Pressing At Lower Temperature To Obtain Pretty Good Consistency.
For Pairing with Powerful Hydraulic or Air-Operated Shop Presses.
Precise Two-Channel Digital Controller with Temperature & Press Timer and Magnetic Feet.
Fahrenheit and Celsius Temperature Scale Options.
Caged Plates (DHPK38), Control Unit, AC Power Cord and Operation Manual Enclosed.

Check Stock

AMZCNC Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/16" 1/8" 3/16" 1/4" Cable –Wire Swaging Tool 8 Ton and Stainless Steel Cable Cutter

Compatibility : Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power:10 tons. Stroke : 12mm. The hydraulic crimper is suitable for power wires, electrical cables, battery cables and welding cables. Cable Cutter Cuts up to 5/32" stainless steel cable..
Material: Made of durable materials with high strength and good toughness. Dies are made of hardened steel with chrome finish.Vinyl-dipped grip for comfort and easy control. Cable Cutter: Using SK5 high carbon steel Seiko forging, durable..
Size: Hydraulic Hand Crimper Tool: Length:approx.12.2 inches, Weight:approx.N.W3.8lb G.W6.6lb. Cable Cutter: 8.1 x 2.8 x 1.4 inches, Weight:11.2 ounces..
Easy to use: On/Off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire. A return spring is installed on the handle for easy one-handed operation of the tool.The C-style head makes side entry easier to change the dies..
What you get: Includes die positioning pin, seal rings, strong protective carrying case, cable cutter and pair of work gloves..

Check Stock

Dulytek Retrofit Two Channel Heat Plate Kit 3 x 6 Anodized Aluminum Caged Plates Working with 10-20 Ton Hydraulic or Air-Operated Shop Presses

3" x 6" Caged Two Channel Dual Heating Insulated Plates For 10 - 20 Ton Hydraulic or Air-Operated Shop Press.
High Pressure Operation Makes Pressing At Lower Temperature To Obtain Pretty Good Consistency.
Paired with Powerful Hydraulic or Air-Operated Shop Presses.
Digital Controller with Temperature & Press Timer.
Fahrenheit and Celsius Temperature Scale Options.
Caged Plates (DHPK36), Control Unit, AC Power Cord and Operation Manual Enclosed.

Check Stock

Dulytek DHP7 Hydraulic Heat Press Machine 7 Ton Pressing Force Dual Heat 6 Plates Precise Two-Channel Control Panel - [Starter Kit Included]

14000 psi Ram Hydraulic Jack Ensures Successful Pressing at Relatively Low....
Leak-Free Removable Hydraulic Bottle Jack for Easy Replacement.
Reinforced Jack Handle to Add Strength and Durability.
Upgraded Body Frame to Hold Up To 12-Ton Force.
Ergonomic Handle Design Allows You to Move the Press Conveniently.

Check Stock

Bonvoisin 10T Hydraulic Cylinder Jack Porta Power Mini Hydraulic Ram Multi-Acting Low Profile Lifting Cylinders for Machinery Shipbuilding (Cannot Retract Automatically)

[Ultra-thin & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
[Note] - After the pressure is relieved, the piston of the jack ram CANNOT retract by itself! You must use gravity to press the jack to retract, which is not a quality problem..
[Used with Pumps] - The porta power should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2)..
[Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
[One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..

Check Stock