ReviewsHydraulic Gear Puller

Stark 4-Pieces Jaw Gear Puller Set (3-inch, 4-inch, 6-inch and 8-inch) Removal Bundle Set for Pulley, Slide Gears, and Flywheel

Multi-Position Design - Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
Damage-Free Removal - Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
Built-to-Last - Forged &hardened steel provide maximum strength and longevity to the gear puller sets.
Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
Work with your Tools - Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal.
Durable 4pcs Jaw Puller Set - 3, 4, 6 and 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease.
3 prong gear puller evenly distributes pulling force to protect your gears.

Check Stock

ABN 3-Jaw Gear Puller 4-Piece Set – 3in, 4in, 6in, 8in – Removal Tool Kit for Slide Gears, Pulley, and Flywheel

[Durable 3 Jaw Puller Set]: Use the ABN 3, 4, 6, and 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease.
3 prong gear puller evenly distributes pulling force to protect your gears.
[Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
[Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
[Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets.
Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
[Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal.

Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..

Check Stock

DURATECH 6-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
Jaw Spread: 6in, Jaw Reach: 2-9/16in, Puller: 5.7T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..

Check Stock

Bonvoisin 5T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..

Check Stock

10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump

Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.

Check Stock

DASBET 3 Jaw Pilot Bearing Puller, Heavy Duty Pullers Set Bushing Gear Extractor Wheel Bearing Puller Automotive Machine Tool Kit for Car SUV

3 Jaw Gear Puller: Used to removes pilot bearings, pump bearings, brushings.Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside..
Premium Quality: 3 Jaw Extractor is corrosion-Resistant Black Oxide Finish. Forged and Heat Treated Steel Jaws.Drive screw is covered by phosphating, which provides maximum strength and longevity to the gear puller..
Bearing Range: Bearing Puller uses in removing all sleeve-type bearings from diameter 0.6" to 1-1/2" (16mm-38mm). Structure design, gently turning the small wrench can produce a strong pull force..
Wide Application: Puller Set is ideal for: Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
Package Included: 1 x 3 Jaw Pilot Bearing Puller.

Check Stock

INTBUYING 10T Hydraulic Cylinder Liner Puller Dry-Type Splitter 80-137mm with Box（Dry-Type）

【Computer Desk】10T Hydraulic Cylinder Sleeve Liner Puller Dry-Type Splitter 80-137mm with Box ..
【Parameter Details】Maximum pressure: 10T.
Max Axial maximum pull distance： 50mm.
【Included】9X pull plate ,1x Lifting plate,1x cardan joint,1x Lifting cylinder,1x handle,2x cylinder sleeve connecting rod,2x cylinder sleeve stand,1x cylinder sleeve beam.
【Description】80-137mm 10T hydraulic cylinder liner puller dry-type Splitter：80 85 88 93 100 102 105-106 125-126 137..
【Guaranteed】If there is any questions please feel free to contact with us, our experienced TBVECHI customer service team will response in 24 hours. If you’re not 100% satisfied with your purchase, we will provide a money-back guarantee..

Check Stock

Shankly Harmonic Balancer Puller, Crankshaft Pulley Removal Tool or Harmonic Pulley Puller Tool, Steering Wheel Puller Kit with Heavy-Duty Case for Pulley Puller and Installer Kit

✅ HARMONIC BALANCER PULLER SET: This pulley puller, and other tools are designed to handle a variety of jobs, giving the user multiple uses for a single toolset and allowing for the easy and simple removal of steering wheels and crankshaft pulleys.
✅ TIME SAVER: This gear puller tool or harmonic puller eliminates the need for a technician to go through the time-consuming process of first removing the radiator before being able to remove the pulley.
✅ STRONG JAW DESIGN: This harmonic balancer puller jaw design or (tools flywheel puller tool set) provides greater durability, clevis pins allow jaws to be quickly removed and installed, allowing the user to finish the job quickly and effectively.
✅ IDEAL FOR TIGHT SPACES: Shankly's pully puller tool or gear puller is designed to extract damper pulleys in tight engine compartments, the compact design provides more room to work than many harmonic balancer puller tool.
✅ HEAVY-DUTY CASE: This harmonic balancer puller/installer set or puller set sits neatly in a tidy blow molded case with a built-in handle and slide latches making it simple and easy to move and store this tool.

Check Stock

OTC 1180 10-Ton Capacity Push Puller Set

3 popular OTC bar-type pullers in one versatile set, all packed in a handy plastic storage case.
permits damage-free pulling of gears, bearings,....
Ideal for servicing heavy-duty trucks, off-road construction equipment, and machinery.
Set consists of a No. 927 10-ton push-puller with 6-3/4 inch puller legs, an 8-3/8 inch reach and a 2-1/8 to 7-1/4 inch spread.
No. 522 Gear and Pulley Puller has a spread range of 2 inches to 7-3/4 inches when used with 1/2 inch cap screws (cap screws not included).
No. 7393 Gear and Pulley Puller includes 5-1/2 inch long and 13 inch long forcing screws and two 3/8-16 x 3 inch long hex head cap screws.

Check Stock

Orion Motor Tech OMT Gear Puller Set 3 4 6 3 Jaw Puller Kit for Pulley Gear Bearing Flywheel Removal Heavy Duty Pulley Puller with Reversible Jaws 3 pcs Bearing Puller Tool Kit

UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts.
BETTER TOGETHER: Our bearing puller set includes three puller sizes, offering maximum spreads of 3", 4", and 6" and reaches of 4.3", 5", and 7.3" to cover most applications.
3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage.
REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6" gear puller provides 4 configurations for a sure grip thanks to its dual fixing holes.
TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability.

Check Stock