ReviewsHydraulic Hose Clamp Kit

Superior Pump 99621 Lay-Flat Discharge Hose Kit, 1-1/2-Inch by 25-foot

  • 25-Foot discharge kit for use with most sump and utility pumps.
  • 1-1/2-Inch by 25-foot reinforced PVC lay-flat hose.
  • Hose kit also includes: (1) 1-1/4" FTP x 1-1/4" FTP or 1-1/2" MPT coupling, 1-1/4" MPT x 1-1/2" BARB adapter and one stainless steel hose clamp.
  • Includes all components: Hose, Hose Clamp, Coupling, Barb Adapter - for quick, easy installation.
Check Stock

Hydraulic A/C Hose Crimper Hydraulic A/C Crimping Tool Hydra-crimp for Barbed and Beaded Hose Fittings

  • Repair AC Hoses on the Vehicle.Automotive AC hose crimping tool is apply for beadlocking fitting and barrier A/C hose..
  • The lightweight hand-held hydraulic hose crimper is very portable and ideal for shop and field applications..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice.
  • The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes:6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.
Check Stock

Swpeet 121Pcs 7-22mm Spring Band Hose Clamps with Swivel Flat Band Fuel Hose Clamp Plier Assortment Kit Silicone Vacuum Hose Action Pipe Clamp Low Pressure Air Clip Clamp for Hose Clamps

  • What You Get --------- In this kit, You will get 120Pcs 12 Sizes Assorted Spring Band Hose Clamps, Including 7mm.
  • 22mm. Have 12 Sizes and each sizes 10Pcs. Including 1Pcs Swivel Flat Band Hose Clamp Plier. These Tool kit can meet all your daily needs..
  • Flat Hose Clamp Pliers with O Shape ------ Our hose clamp pliers with a flat feature that can get into those tight spaces and get the job done with ease! Locking ratchet that holds the clamp open for easy installation and removal. Tips swivel to allow access in confined areas and can be used at any angle..
  • High Quality ------ Spring Clips Made of high quality 65Mn Spring Steel, anti-corrosion and durable for long time use. Great product for your fuel line repairs. Great price and quality. These pliers are constructed from high carbon steel with a Manganese Phosphate coating to prevent rust and corrosion. Highly recommend..
  • Great Value for Kit, Get The Right Tool, Much Easier ------------ Perfect for lower or medium pressure. Get the right tool to install or remove. Work best on tube fittings with the small bead rolled on the end. Better for small tubing than worm screw type unless high pressure. Get the chart to convert the numerical mm's size to f....
Check Stock

Adjustable House Clamp 304 Stainless Steel, 14.7 FT Duct Metal Strapping with Holes + 10 Stronger Fasteners, Large Worm Gear Hose Clamps Band Clamps for Pipe Plumbing Mechanical Applications

  • [Any size hose clamps Assortment Kit] Do you sometimes need an odd-sized hose clamp, especially one that would be bigger than you would normally use? If so, this is the hose clamps assortment kit for you, with this kit you custom-cut your own clamps when and as you need them. No more ill-assorted collections of mostly wrong-size clamps that are usually too big or too small for your needs with no bulky, wasted material..
  • [Package Include] The hose clamp kit includes 0.5’’ X 14.76 FT stainless steel strapping bands, and 10 pcs fasteners in total. They can be adjustable for most clamp and securing situations. Moreover, very strong good quality 304 stainless steel will not rusty for a long time..
  • [How to Use] Before using, prepare plier for cut the hose clamps, and a small flat bladed screwdriver. Then, test feed the direction of the band before crimping the screw end on by feeding in, screwing, making sure it is not locking up after few turns. The band will work smoothly and is tightened by a screw with threads of the screw engaging the slots in the band, if put together proper way. Once you get screw clamp part mounted on the band, just measure how long you need i....
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 1/2 Inch to 2 1/2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch to 1/2 inch, 3/8 inch to 5/8 inch, 1 inch to 2 inch, 1-1/2inch to 2-1/2 inch, the various size stainless steel clamps help you easy to clamp different size hose or pipe..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are w....
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 Inch to 2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line, Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch, 1/2 inch, 3/8 inch, 5/8 inch, 1 inch, 2 inch, 1-3/5inch, 2-1/2 inch. Stainless steel clamps with various size can meet your different clamping requirements..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are widely applic....
Check Stock

ABN Hose Clamp Plier 9-Piece Set – Universal Automotive Fuel Hose, Oil Hose, Water Hose Removal Pliers Remover Tool Kit

  • [Cohesive Plier Clamp Set]: ABN Hose Clamp Plier 9-Piece Set is a one stop shop for taking apart an engine or replacing fuel, oil, and water hoses.
  • Tools in the plyer kit squeeze together taking pressure off hose.
  • Tools can hold the locking tab of connector in an open position leaving your hands free to work elsewhere.
  • [Built to Last]: Corrosion-resistant nickel chromium steel.
  • Long-reach hose clamp pliers with 24-inch (61cm) flexible wire cable shaft allows access to awkward angles.
  • Approximate 1.2 to 1.75-inch (3 to 4.4cm) jaw openings swivel to access hose clamps in any position (approximate 8-inch / 20.3cm overall length).
  • [Comfortable Grip]: Molded, rubberized handles for less user fatigue and more productivity.
  • Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries.
  • [Portable Storage]: Heavy-duty 18.6 x 3.5 x 10.9 inch (47.2 x 8.9 x 27.7cm) plastic blow-molded case with handle for easy transportation, safe storage, and quick organization.
  • [Package Contents]: Includes a single hose clamp pliers, swivel jaw band clip pliers, swivel jaw spring wire clip pliers, flat band hose clamp pliers, angled flat band hose clamp pliers, hose removal pliers, circle-R (clic-R) collar....
Check Stock

RSN Sports Bleed Kit for Shimano Hydraulic Mountain Bike Brakes with 60ml Mineral Oil

  • BleedZone kit for SHIMANO hydraulic 2 piston MTB brakes. A special feature of our kit is the flexible silicone hose, which offers a very secure attachment to the bleed nipple. Join over 100,000 riders who have bled their brakes with us!.
  • ➤ funnel + stopper, genuine 60ml SHIMANO mineral oil rebottled.
  • ➤ reusable 20ml syringe, high quality, flexible silicone hose.
  • ➤ bleed block, pair of gloves, hook and loop fastener pair.
  • COMPATIBILITY: Works with XTR, XT, SLX, Deore, Saine, Zee, Alivio, Acera, and Altus hydraulic brakes..
Check Stock

Two Little Fishies ATL5410W 6-Piece Plastic Hose Clamp Set, 3/4-Inch

  • WHAT YOU WILL GET? – The hose clamp kit comes with totally 40 pcs hose clamps with 7 size range, enough for your spare and replacement in daily life around you house, garage, lawn and garden.
  • DURABLE 304 STAINLESS STEEL –The hose clips are made of high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust, anti-corrosion, water proof, oil proof than other 201 stainless steel. Solid and sturdy material ensure the adjustable hose clamps last a long time for use.
  • NICE ASSORTMENT SIZES – The stainless clamps include 7 different diameters steel hose clamps to adapt to different hoses: 6-12mm, 10-16mm, 13-19mm, 16-25mm, 19-29mm, 18-32mm, 21-38mm. The Clamp kit are flexible and ductile with wide adjustable size range from 6 to 38mm/0.24-1.5 inches.
  • EASY TO INSTALLL AND REUSABLE – The hose clamp designed with a worm gear mechanism to adjust the clamp’s diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage. These clamps also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
  • WIDELY USED – The pipe tube clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfec....
Check Stock

Orion Motor Tech Hose Clamp Pliers, Long Reach Wire Spring Hose Clamp Pliers Remover for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps

  • Universal Hose Pliers Set: Includes long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
  • Perfect Fit: Having purpose-built tools will eliminate time-consuming work arounds and jerry rigging, making your hose work a breeze. This hose clamp tool box set works with plastic and metal hose clamps from 11/16 inch to 2 1/2 inches..
  • Locking Design: The 5 spring-clamp pliers are capable of locking in place to free your hands and speed up your repair work..
  • Durable & Easy to Use: If this kit seems overwhelming, amateur mechanics can use the included instructions to work out what to use where. For pros, the sturdy blow-molded case keeps things organized and portable.
  • the tough plastic handles reduce fatigue during use.
  • and the black-oxide finish staves off rust and corrosion, allowing you to enjoy these carbon structural steel tools for years to come..
  • Satisfaction Guaranteed: Order now, knowing your tool kit is backed by OMT's warranty and friendly customer service..
Check Stock

YFIXTOOL Hydraulic Pressure Test Kit with 5 Gauges (150/1500/3500/6000/9000 PSI) & 14 Tee Connectors, Hydraulic Pressure Gauge Set with 5 Test Hoses & 13 Couplings for Excavators

  • ?【Main use of hydraulic test kit】This hose gauge kit is designed for testing pressure in a hydraulic system..
  • ?【Features】This hydraulic hose has the characteristic of heat resistance, chemical resistance, acid resistance and solvents..
  • ?【Strong environmental adaptability】Ozone resistance, UV resistance, adaptation to climate change, no moisture absorption..
  • ?【Convenient to use】With advanced structure, reliable sealing, small size, light weight and easy to use..
  • ?【High quality and durable & Guarantee】Because the inner wall is smooth, the flow resistance is very small. If there any issue about this product, please contact us, we will give the best solution in the first time. we guarantee replacement or refund..
Check Stock