ReviewsHydraulic Hose Couplers

Titan Attachments Hydraulic Backhoe Thumb 24' 70 lb. Weld On Steel Plasma Cut

  • Includes thumb, hydraulic cylinder, hydraulic hoses, mounting plate, pins, and bushings..
  • Hydraulicpowered retraction gives full control over load size and adds crushing strength to grip..
  • Heavy duty steel plasma cut for tight tolerances..
  • 1/2" Flat face couplers and hoses included..
  • Thick powder coat to resist rust. | Easy to assemble and weld into place..
Check Stock

Bestauto Skid Steer Hydraulic Quick Connect 1/2\ Body Hydraulic Coupler 1/2\ NPT Hydraulic Coupling Quick Connect 2 Pairs Hydraulic Quick Coupler 27.6 MPa (ISO 16028) (2 Pairs)

  • Advanced Design: This flat face hydraulic connect coupler set features an improved valve design, which allows for a rated pressure of 4000 PSI, 45/L high-flow, zero fluid loss, and long service life. It meets the standards of ISO 16028, perfect for connecting your hydraulic lines..
  • Quick Connecting: The sleeve locking mechanism (with 1/2" NPT thread) makes the couplers easy to connect with a simple push. Rotate the collar to lock them tightly, preventing accidental disconnection. If you need to disconnect it, aim the point at the gap, then give a pull. Connection is simple, effortless, and requires minimal force..
  • Hardened Steel Construction: Our quick couplers are strongly built with hardened stainless steel to resist deformation and high temperatures. The zinc-nickel plating provides high resistance against rust and corrosion. They are built tough to last for years to come..
  • Dust Covers Included: Dust caps are included to prevent dirt from disrupting the connecting system, preventing the risk of malfunction. The retaining ring is covered by a sleeve. Additionally, a dust seal is placed within the spring area..
  • High Compatibility: The quick coupler set is designed for applications where hydraulic spillage is likely to occur. It can be interchanged ....
Check Stock

YNAir 18 Pieces Air Compressor Accessories kit, 1/4 in x 25 ft Recoil Poly Air Compressor Hose Kit, 1/4″ NPT Quick Connect Air Fittings, 100 PSI Tire Inflator Gauge, Blow Gun, Couplers and Plugs

  • Grerat Air Compressor Accessories Kit – This 18pcs compressor tools kit includes a 25ft recoil poly air hose, blow gun and nozzles, tire inflator gauge, couplers and plugs, inflation needles, and more useful pieces..
  • Flexible, Long, Lightweight Recoil Poly Air Hose – Our 1/4″ x 25ft recoil poly hose with 1/4″ FNPT and MNPT couplers offers 120 PSI of stable pressure. Performs well in both high and low temperatures..
  • Heavy Duty Well-Made Craftsmanship – For personal and professional use, the fittings, connectors, plugs are crafted with corrosion-resistant metal, respectively..
  • Universal Accessories and Attachments – This kit has all the small details to suit your air compressor, including tire inflator gauge, blow gun, nozzles, rubber tip, couplers, plugs, and PTFE tape..
  • Quick response and One-Year Warranty – We pride ourselves on creating the highest-quality tools and accessories possible, which is why we back every order by responsive customer service and a 1-year warranty..
Check Stock

Hydraulic AC Hose Crimper 71500 Manual A/C Hose Crimper Kit Air Conditioning Repair Handheld Hydraulic Hose Crimping Tool, SK8057

  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes: #6(5/16"), #8(13/32)", #10(1/2"), #12(5/8") and reduced barrier hose sizes: #6(5/16"), #8(13/32)", #10(1/2"), #12(5/8") . Note: #8SRB and #6 is the same dies, with purple color..
  • This hydraulic crimping tool is made of aluminum alloy material, ensuring the durability. Stamper hardness can reach up to 53 HRC, making the crimping effect better, and the hand‑held detachable hydraulic design makes the manual air conditioning hose compressor easier to use..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice. The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws..
  • Hose Crimper Kit comes with a whole set of accessories and one storage box, which makes it easier for you using. Easy to store, easy to organize, avoid missing..
  • 7*24 hours online service. If you encounter any questions during the shopping process, you are welcome to contact us at any time..
Check Stock

3/4\ SAE Skid Steer Bobcat Flat Face Hydraulic Quick Connect Couplers with Dust Caps,The Universal Quick Disconnect Coupler Bobcat Case/New Holland, Kubota

  • The flat face hydraulic quick connect couplers with 3/4" SAE thread+ 1/2 body, impoved design high flow performance and maximum service life.
  • The universal quick disconnect coupler connect interchange with most models of skid steers loaders including Bobcat Case / New Holland, Kubota.
  • Applications:used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,constructionindustrial hydraulic lines..
  • Non-spill flush face valves minimize fluid losses.
  • Made by harden steel construction with zinc nickel plating for superior corrosion resistance ,and one hand push-to-connect operation.
Check Stock

Mityvac MV6400 1 Gallon Fluid Dispensing System for Topping Off Fluid Reservoirs, Master Cylinders Includes 5 ft. Hose with Wand and Flow Control Valve

  • The MV6400 is intended for filling reservoirs with fluids such as engine coolant, motor oil, or wiper, automatic transmission, brake or power steering fluid. However, with the proper accessories it can safely be used to pressure bleed hydraulic brake or clutch systems, or refill or top-off sealed automatic transmissions..
  • An integrated manual pump dispenses fluid by pressurizing the 1.2 gallon (5 liter) reservoir and Includes a thumb-operated tilt valve that is conveniently located for manual pressure relief and doubles as a safety valve to prevent over pressurization..
  • Fluid is continually dispensed as long as there is pressure in the reservoir and freeing up the operator’s hands.
  • pumping is only required to build additional pressure..
  • The pump tube is sealed to prevent exposure to chemicals and cleans easily between fluid changes..
  • For convenience and speed, push-to-connect, quick-change-style couplers are used at both ends of the fluid dispensing hose..
Check Stock

Akozon Hydraulic Pressure Gauge Hydraulic Hose Test Point Coupling M16 2-BSP1 / 4 0〜600BAR / 0〜8500PSI with 1.56m / 61.42inch Hose Kit Hydraulic Pressure Test Kits

  • 【Test the Pressure】This hose gauge kit is designed for testing pressure in a hydraulic system.Test the pressure of each point of the hydraulic system and the pipeline as a conductive fluid medium. The pressure measuring hose assembly is used in conjunction with the pressure measuring connector..
  • 【High Quality】This hydraulic pressure gauge kit has one strong and light aluminum case.Excellent material selection, the shell is made of 304 stainless steel, stainless steel material has the characteristics of wear resistance, , and good contact performance,well protect the inner accessories..
  • 【Chemical stability】This hydraulic hose has the characteristic of heat resistance, chemical resistance, acid resistance and solvents.
  • 【Strong environmental adaptability】 ,resistance, adaptation to climate change, no absorption..
  • 【High Performance】The pressure measuring hose assembly has the advantages of advanced structure, reliable sealing, secure seizure, small size, light weight and easy use. Because the inner wall is smooth, the flow resistance is very small..
Check Stock

Toledo Hydraulic Hose Cut Off Saw Model 14, 4.5 HP, 115V, 3500 RPM cuts up to 2\ - 6 wire

  • Toledo Hydraulic is proud to bring you a medium to heavy duty hose cut off saw made in the USA..
  • The HC14 cut off saw is designed for quick, easy cutting of industrial wire reinforced hose..
  • Comes equipped with a 14" Scalloped blade, 4.5 HP Motor that runs at 3500 RPM..
  • Handles rubber covered wire reinforced hose ranging in size up to 2" ID hydraulic hose..
  • Handles 4" inner diameter for industrial hose..
Check Stock

Dometic SeaStar Pro Outboard Hose Kit, HO5722, Kevlar Reinforced, 22ft.

  • SeaStar PRO HO5722 Kevlar Reinforced Hydraulic Steering Hose Kit includes two (2) 22-Foot Hoses.
  • Custom Multi-Layered Composite Design with Kevlar Reinforcement for Strength.
  • Engineered to Provide your Steering System with Very Low Thermal Expansion Properties.
  • Designed to Exceed SAE and ABYC Specifications and Provide Precise Steering Control not Achievable with Hydraulic Industry Standard Hoses.
Check Stock

Hydraulic A/C Hose Crimper Hydraulic A/C Crimping Tool Hydra-crimp for Barbed and Beaded Hose Fittings

  • Repair AC Hoses on the Vehicle.Automotive AC hose crimping tool is apply for beadlocking fitting and barrier A/C hose..
  • The lightweight hand-held hydraulic hose crimper is very portable and ideal for shop and field applications..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice.
  • The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes:6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.
Check Stock

TIKSCIENCE Bleed Tube with Bridge Tube for Seastar Hydraulic Steering Systems Hydraulic Steering Filler Kit

  • Application - Hydraulic steering filler bleed tube kit fit Seastar hydraulic steering systems.
  • Package Includes: Bleed kits include bridge tube and bottle to tube, used to replenish the steering system fluid of ships, hose with screw cap which....
  • Save Your Money - Hydraulic steering filler kit used to replenish oil for the ship's steering system fluid, entire steering system remains sealed....
  • Simple to Use - Connect the steering fluid bottle to the fitting with the adapter hose and vent the bottle per the instructions on the hose and bottle....
  • Service - Undergoes more stringent testing than aftermarket products, you will get a 90-day shelf life for our store. If you have any questions about....
Check Stock