ReviewsHydraulic Hose Sealing Products

gazechimp Stainless Steel Outboard Steering Link Lever Tie Rod End Set for Marine Boat

  • Built and certified to meet safety & quality requirements established by the American Boat & Yacht Council (ABYC) and International Standards Organization (ISO).
  • Hydraulic Steering Kit without hoses (ordered separately HO51xx where xx equals hose length in feet) for non-aggressively driven single outboard powered boats that do not exceed 75mph.
  • Updated system includes O-ring boss rotational fittings for easy hose routing and new end gland sealing system for maximum protection from saltwater and compression set.
  • Five turns lock-to-lock with 1.7 cu.in. helm (included) for maximum steering comfort.
  • Robust Barrel Design and NEW Graphics compliment new boats and motor packages.
  • Not recommended for boats that exceed 75mph or run surface piercing props or the power exceeds the maximum Coast Guard rating for the vessel.
Check Stock

Hydraulic AC Hose Crimper 71500 Manual A/C Hose Crimper Kit Air Conditioning Repair Handheld Hydraulic Hose Crimping Tool, SK8057

  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes: #6(5/16"), #8(13/32)", #10(1/2"), #12(5/8") and reduced barrier hose sizes: #6(5/16"), #8(13/32)", #10(1/2"), #12(5/8") . Note: #8SRB and #6 is the same dies, with purple color..
  • This hydraulic crimping tool is made of aluminum alloy material, ensuring the durability. Stamper hardness can reach up to 53 HRC, making the crimping effect better, and the hand‑held detachable hydraulic design makes the manual air conditioning hose compressor easier to use..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice. The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws..
  • Hose Crimper Kit comes with a whole set of accessories and one storage box, which makes it easier for you using. Easy to store, easy to organize, avoid missing..
  • 7*24 hours online service. If you encounter any questions during the shopping process, you are welcome to contact us at any time..
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock

Toledo Hydraulic Hose Cut Off Saw Model 14, 4.5 HP, 115V, 3500 RPM cuts up to 2\ - 6 wire

  • Toledo Hydraulic is proud to bring you a medium to heavy duty hose cut off saw made in the USA..
  • The HC14 cut off saw is designed for quick, easy cutting of industrial wire reinforced hose..
  • Comes equipped with a 14" Scalloped blade, 4.5 HP Motor that runs at 3500 RPM..
  • Handles rubber covered wire reinforced hose ranging in size up to 2" ID hydraulic hose..
  • Handles 4" inner diameter for industrial hose..
Check Stock

Dometic SeaStar Pro Outboard Hose Kit, HO5722, Kevlar Reinforced, 22ft.

  • SeaStar PRO HO5722 Kevlar Reinforced Hydraulic Steering Hose Kit includes two (2) 22-Foot Hoses.
  • Custom Multi-Layered Composite Design with Kevlar Reinforcement for Strength.
  • Engineered to Provide your Steering System with Very Low Thermal Expansion Properties.
  • Designed to Exceed SAE and ABYC Specifications and Provide Precise Steering Control not Achievable with Hydraulic Industry Standard Hoses.
Check Stock

Hydraulic A/C Hose Crimper Hydraulic A/C Crimping Tool Hydra-crimp for Barbed and Beaded Hose Fittings

  • Repair AC Hoses on the Vehicle.Automotive AC hose crimping tool is apply for beadlocking fitting and barrier A/C hose..
  • The lightweight hand-held hydraulic hose crimper is very portable and ideal for shop and field applications..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice.
  • The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes:6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.
Check Stock

R134A Refrigerator Freon Recharge Hose Kit-R134a AC Refrigerant Charging Guage Hose Set with BPV31 Bullet Piercing Tap Valve and R134a Self-Sealing Adapter, for Home A/C Refrigerant System (Red)

  • 【RH R134a Self-Sealing Adapter】This r134a can tap of the refrigerator charging hose can be compitable with r134a self sealing cans through the extral r134a self sealing adapter. The r134a self sealing adapter’s male side to connect the r134a can tap, the female side to connect self sealing cans’ mouth. With the r134a self sealing adapter, this refrigerator freon recharge kit can compitable with not only piercing r134a cans but also self sealing cans.
  • 【Size & Material】Comepared with others’ freon 134a recharge hose, this refrigerator charge hose’s total length is:22.83inch/58cm from the r134a can tap to 1/4 SAE female port. Others’ length is:19inch(48cm). More durable and solid than others’ recharge refrigerator hose, our r134a can tap of this refrigerant charging hose is made of brass and the hose adopted quality rubber material for long time use.
  • 【Refrigerator Freon Refilling Hose with Guage】The one side of piercing r134a can tap can directly connect puncture refrigerant cans, other side of 1/4 SAE female prot to connect refrigerator male port. And the gauge with colored dials with fahrenheit has scale readings for R134/R12/R22.
  • 【BPV-31 Bullet Piercing Tap Valve】This bpv31 piercing valve can be used for 1/4inch, 5/16inch, 3/....
Check Stock

Hydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set for Barbed and Beaded Hose Fittings

  • Repair AC Hoses on the Vehicle.Automotive AC hose crimping tool is apply for beadlocking fitting and barrier A/C hose..
  • The lightweight hand-held hydraulic hose crimper is very portable and ideal for shop and field applications..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice.
  • The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes:6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.
Check Stock

Bonvoisin Hydraulic Hand Pump Manual Ram Pump 8500psi Porta Power Pump for Hydraulic Tools(CP-180)

  • [Parameters] - Max output pressure: 8500psi. Output of oil: High pressure 2cc. Oil capacity: 400cc. Weight: 3.8kg..
  • [High Quality] - The hydraulic hand pump body has a smooth surface, good sealing and no oil leakage..
  • [Thick Packaging] - The manual pump is packed in thick corrugated cartons, which is effectively shockproof and can better protect the product..
  • [Humanized Design] - The non-slip comfortable handle provides a comfortable grip and is labor-saving to use..
  • [Wide Applications] - The pump can be used with other hydraulic tools, such as hydraulic cylinder jacks, hydraulic crimpers, hydraulic puncher, hydraulic pipe benders, etc., which can save effort and improve work efficiency..
Check Stock

Testing Coupling Adapter, G1/4 to M16*2 Thread Pressure Test Point Testing Coupling Adapter for Hydraulic System Test Point Adapter

  • ★★★【Widely Applicable】- This series of products are widely used in hydraulic system pressure detection, lubrication, exhaust, pressure system oil sampling..
  • ★★★【Long Service Life】- This test adapter is made of high quality carbon steel and stainless steel material, sealing by good sealant, with long serving life..
  • ★★★【High Quality】- It can withstand high pressure, and great temperature resistance..
  • ★★★【Excelent Performance】- Advanced structure, reliable sealing, no oil leak..
  • ★★★【Portable】- Small size, light weight, easy to use..
Check Stock

FANOVO Refrigerator Freon Recharge Hose Kit-R134a R12 R22 AC Refrigerant Charging Hose Set with BPV31 Bullet Piercing Tap Valve,R134a Self-Sealing Adapter, for Home AC Refrigerant System (Style 1)

  • Refrigerator Freon Recharge KitThe r134a refrigerator freon charging hose kit includes 1pcs r134a freon recharge hose with guage, 1pcs bpv-31 bullet piercing tap valve, 1pcs RH r134a self-sealing adapter.
  • RH R134a Self-Sealing AdapterThrough the r134a self sealing adapter, the r134a can tap of the refrigerator charging hose can compitable with r134a self sealing cans. Male to connect the r134a can tap, the female to connect self sealing cans. BPV-31 Bullet Piercing Tap ValveThe bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. Our bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • Refrigerator Freon Recharge Hose with GuageOne side of the refrigerant charging hose is piercing r134a can tap to directly connect puncture refrigerant cans, the other side is 1/4 SAE female prot to connect refrigerator male port. And the colored dials with fahrenheit gauge has scale readings for R134/R12/R22 as the guage show.
  • Size & MaterialThe total length of the ac refrigerant charging hose is:22.83inch(58cm) from the r134a can tap to 1/4 SAE female port. Others' length is:19inch(48cm). Comepared with others' r134a freon recharge hose, our r134a can tap of this refriger....
Check Stock