ReviewsHydraulic Line Kit

BUCKLOS MTB Hydraulic Disc Brakes, Mountain Bike Left Front 800mm Right Rear 1450mm Hydraulic Brake Set Aluminum Alloy Levers with Calipers PM/is Adapter Fit EBike/Fat Bike

  • 【Massive stopping power】This hydraulic brakes for mountain bike is an upgrade kit from the mechanical disk brakes system, you can stop with two fingers only, ideal for trail riding,downhill, choppy mountain,snow, beach, flat road etc, keep you cycling safety..
  • 【Easy to install】Bucklos mtb hydraulic brake set already pre-bled mineral oil for you, you can unboxing ready to install or replacement. Before installation, please confirm whether the hose length is fits with your bicycle frame and if use 180mm, 203mm rotors please replace the adapters.
  • 【Fit most bikes】 HB-875 Zoom hydraulic brakes caliper is dual piston full oil pulling which is equipped with IS/PM universal conversion adapter & mount, compatible with 160mm rotor. brake levers are made of high-end aluminum alloy, fit most of bicycles, like electric ebikes, scooter, folding bikes, fat bike, bmx etc.
  • 【Quiet braking】Bucklos hydraulic disc brakes for mountain bike is made of resin-metal composite braks pads which protect your rotors and do not make any noise when you cycling.
  • 【Brake direction】Bucklos bike hydraulic brakes adopts left-front/ right-back braking method, fits the habit of most American people, cable for front is 800mm, rear line is 1450mm.
Check Stock

BUCKLOS MTB Hydraulic Disc Brakes, Mountain Bike Left Front 800mm Right Rear 1450mm Hydraulic Brake Set Aluminum Alloy Levers with Calipers PM/is Adapter Fit EBike/Fat Bike

  • 【Massive stopping power】This hydraulic brakes for mountain bike is an upgrade kit from the mechanical disk brakes system, you can stop with two fingers only, ideal for trail riding,downhill, choppy mountain,snow, beach, flat road etc, keep you cycling safety..
  • 【Easy to install】Bucklos mtb hydraulic brake set already pre-bled mineral oil for you, you can unboxing ready to install or replacement. Before installation, please confirm whether the hose length is fits with your bicycle frame and if use 180mm, 203mm rotors please replace the adapters.
  • 【Fit most bikes】 HB-875 Zoom hydraulic brakes caliper is dual piston full oil pulling which is equipped with IS/PM universal conversion adapter & mount, compatible with 160mm rotor. brake levers are made of high-end aluminum alloy, fit most of bicycles, like electric ebikes, scooter, folding bikes, fat bike, bmx etc.
  • 【Quiet braking】Bucklos hydraulic disc brakes for mountain bike is made of resin-metal composite braks pads which protect your rotors and do not make any noise when you cycling.
  • 【Brake direction】Bucklos bike hydraulic brakes adopts left-front/ right-back braking method, fits the habit of most American people, cable for front is 800mm, rear line is 1450mm.
Check Stock

228 Buna-N O-Ring, 50A Durometer, Round, Black, 2-1/4\ ID, 2-1/2\ OD, 1/8\ Width (Pack of 10)

  • O-RING ASSORTMENT KIT: NEIKO introduces our Rubber O-Ring Assortment Set. Each O-ring acts as a joint gasket to seal and protect water lines in any oil line, faucet, sink, filter, toilet, or other machinery..
  • VERSATILE & RELIABLE: Thanks to the NBR construction, these O-rings are resistant to water, UV, lubricants, hydraulic fluids, gasoline, alkalis, and grease. Each O-ring creates a long-lasting seal system that protects your devices from leaks..
  • DURABLE O-RING KIT: Each O-ring in this 270-piece set is built for long-lasting use with static and dynamic motion cylinder fittings. The rings are made of commercial-grade nitrile butadiene rubber for liquid resistance..
  • COMPACT SIZE: Our O-ring kit comes organized in a case by ring size and shape. Carry this seal tool set with you wherever you’ve got a leak that needs extra sealing protection, and be ready to repair against water leaks and other liquids..
  • WHAT’S INCLUDED: This rubber O-ring set includes 18 common small and large SAE and metric sizes for a range of home, hydraulic, industrial, and pneumatic applications. A sturdy plastic case is included..
Check Stock

MuHize 1/4\ Brake Line Tubing Kit -25 Ft. of 1/4 Flexible Copper Coated Brake Line Tube Roll 25 ft (Includes 16 Inverted Flare Fittings)

  • PACKAGE INCLUDE - MuHize Brake Line Kit Replacement with 16 Fittings: ① 2 x 1/4”(7/16-24) Inverted Tube Nut.
  • ② 10 x 1/4” (7/16-24) Inverted Tube Nut (Long).
  • ③ 2 x 1/4”(9/16-18) Inverted Tube Nut.
  • ④ 2 x 1/4”(1/2-20) Inverted Tube Nut.
  • SUPER EASY BENDING & FLARING - MuHize brake lines are easy to be bent with great flexibility by hand and flare by simple tools..
  • HIGHER QUALITY - MuHize brake lines are made with unique surface treatment. The lastest copper alloy brake line is better than standard steel tubing with corrosion resistance..
  • WIDELY APPLICATION - MuHize 1/4 brake line tubing kit commonly fits for Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of brake lines. We promise that if the line is installed correctly out, the lines will extend the lifespan of the vehicle..
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Flaring Tool Set Brake Repair Brake Flaring Tools for 1/4 -3/8 Brake Flare Tool with Tube Cutter and Deburrer Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with φ 1/4", 5/16", 3/8" expanding dies and adapters, including 45° flaring cone,....
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with....
  • Pipe Cutting & Deburring: The flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging....
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a....
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper and stainless steel piping. It is an excellent tool for repairs on....
Check Stock

NEW GM T-56 HYDRAULIC THROWOUT BEARING,97-04 CORVETTE,98-02 CAMARO,LS1,LS6,LS7

  • Brand New Ram Hydraulic Throwout Bearing Kit for Stock Style Clutches with GM Tremec T-56 Transmissions (Ram Part #78165)..
  • Fits GM Tremec T-56 transmissions in: * 1997-2004 Chevy Corvette with LS1, LS6, and LS7 engines. * 1998-2002 Chevy Camaro with LS1 engines. * 1998-2002 Pontiac Firebird with LS1 engines..
  • Fits stock style clutches. * Includes a replacement transmission collar to install on your T-56..
  • Includes a remote bleeder line, as well as a supply line. The factory supply line is cut and the adapter fitting (included) is installed with the new supply line..
  • Also, includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as installation instructions..
Check Stock

Dometic SeaStar Pro Outboard Hose Kit, HO5722, Kevlar Reinforced, 22ft.

  • SeaStar PRO HO5722 Kevlar Reinforced Hydraulic Steering Hose Kit includes two (2) 22-Foot Hoses.
  • Custom Multi-Layered Composite Design with Kevlar Reinforcement for Strength.
  • Engineered to Provide your Steering System with Very Low Thermal Expansion Properties.
  • Designed to Exceed SAE and ABYC Specifications and Provide Precise Steering Control not Achievable with Hydraulic Industry Standard Hoses.
Check Stock

OKBA 64pcs JIC 37° Flare Thread Cap&Plug Kit,37 Degree JIC Cap and Plug Assortment Kit Precision Threading Hydraulic Hose Tube Pipe Adapter AN Fittings Set Kit Dash Sizes 04 06 08 10 12 16

  • 64 PCS hydraulic JIC cap & plug fittings kit,AN assortment hydraulic fitting set,also known as "AN" 37 degree flare JIC caps and plugs. The JIC 37° flare thread cap & plug can be easily installation to seal hydraulic hoses, tubes, and pipes.
  • A must have for hydraulic lines: hydraulic JIC plug and cap cap kit works great for hydraulic repairs.The JIC cap and plug are sealed quickly keep hydraulics lines from fluid leaking when remove fluids hydraulic application/machinery work/ truck/chemical processing systems.
  • The hydraulic adapter fittings set are made by carbon steel to withstand high pressure applications and high heat fuel delivery and fluid power applications. The jic cap and plug kit fittings have precision threading to make sure install smoothly and resist corrosion.
  • Packed in a plastic carring storage box case and with size chart with thread sizes,keeps all 37° JIC caps & plug fitting organized with dash sizes: 04, 06, 08, 10, 12,16.
  • Package including:#4 (7/16-20) JIC caps&plugs---each 10PCS| #6 (9/16-18)caps&plugs ---each 8PCS| #8 (3/4-16)caps&plugs---each 6PCS| #10 (7/8-14)caps&plugs---each 4PCS| #12 (1 1/16-12) caps&plugs---each 2PCS| #16 (1 5/16-12) caps&plugs---each 2PCS.
Check Stock

PETCHOR HB-100 Line Pulling Hydraulic Disc Brake Calipers, Mechanical Disc Brakes for MTB, Mountain Bike, E-bike and Electric Bike 2PCS Front/Rear Red

  • 【Braking System】:Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way brake system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the line pulling hydraulic brake of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or scrap the oil disc.
Check Stock

catazer MTB Road HB-100 MTB Road Line Pulling Hydraulic Disc Brake Calipers Front & Rear Mountain Bike Disc Brake E-Bike Disc Brake (1 Pair Black)

  • Braking System:Line Pulling Disc Brake Compatible Hydraulic Bike disc brake kit.
  • Note: Do not remove the "yellow piston block" when installation, otherwise it will cause oil leakage or scrap the oil hydraulic disc..
  • Two reasons will cause brake noise: 1) the wheels are not installed properly.
  • 2) the disc rotor is not flat. Please note..
  • Suitable for mountain E-Bike,MTB, road bikes and folding bikes etc..
  • Weight:Front 199.6g,Rear:204.8g,Include Bicycle Disc Brake Pads.
Check Stock

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/9Couplings, Excavator Parts Hydraulic Tester Coupling, Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Eight interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/8, G1/4, G3/8, M10/1, M10/1.25, M14/1.5, UNF7/16-20, and UNF9/16-18, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shippi....
Check Stock