ReviewsHydraulic Pump With Pressure Gauge

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/9Couplings, Excavator Parts Hydraulic Tester Coupling, Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Eight interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/8, G1/4, G3/8, M10/1, M10/1.25, M14/1.5, UNF7/16-20, and UNF9/16-18, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shippi....
Check Stock

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/11Couplings, Excavator Parts Hydraulic Tester Coupling Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Ten interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, R1/4, G3/8, G1/8, M10 x 1, M10 x 1.25, M1/8, M14 x 1.5, 7/16, and 9/16, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, sh....
Check Stock

VEVOR 2510A Air Hydraulic Pump 10,000 PSI Quick Power Air Hydraulic Foot Pump 1/2 Gal Reservoir Foot Actuated Hydraulic Pump for Heavy Machinery Rigging & Auto Repair

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 103 cubic inches / 1.7 liters(1700 cc), 0.45 gallons, Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features a high-quality aviation aluminum pump core and shell to handle tough industrial applications. 1.6L ± 0.1L oil tank has a larger capacity with 103 cubic inches / 1.7 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Durable Oil Pipe Included: This hydraulic air pump is equipped with a 6.5 ft / 2 m high-pressu....
Check Stock

VEVOR Hydraulic Pressure Test Kit 25/40/60MPa, Hydraulic Test Gauge Kit with 6 Couplings, Hydraulic Gauge Kit Made of 304 Stainless Steel, for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Six interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, G1/8, G3/8, M14 x 1.5, M10 x 1, and M10 x 1.25, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shipping, etc..
Check Stock

Air Hydraulic Pump 10000 PSI 1/2 Gal Reservoir Single Acting Pullers Foot Pump with Trachea and Oil Pipe for Pumping Water Automobiles Industrial Chemical Petroleum Mining Pulling Post

  • 【ALL-METAL STRUCTURE】This hydraulic foot pump is specially designed for industrial applications with all-metal structure. It has fully reliable components, all components are standard 3/8 inch NPT..
  • 【FOOT PEDAL CONTROL】The hydraulic pump adopts a humanized pedal motion design, which is easy to control and operate, save time and effort and has strong power, pressure adjustable.Full of power, two-stage pressure relief, 1.5 times the speed of ordinary hydraulic pumps..
  • 【OUTPUT PRESSURE】Air Treadle Foot Actuated maximum pressure: 10000 psi hydraulic pump and has a built-in safety overload pump power saver. Maximum input air pressure: 140PSI. Flow rate: 0.74-0.97 m3/MIN. Rated pressure: ≤ 70 Mpa..
  • 【APPLICATION】Widely used in automobile manufacturing inspection and maintenance, engineering technology, aerospace, chemical, petroleum, mining and other industries to provide high-pressure power for hydraulic equipment..
  • 【FAST OILING AND GOOD SEALING PERFORMANCE】Aerospace Grade Materials aluminum fuel tank capacity: 1.6L, hydraulic oil type: AW-32. The hydraulic pump is equipped with a high-pressure tubing. Oil outlet: 3/8 inch NPT, Air inlet: 1/4 inch NPT. The tubing adopts double-protected embedded steel wire and a thickened outer layer, whi....
Check Stock

YZM Stainless Steel 304 Liquid Filled Water Pressure Test Gauge ,0-220psi, 2-1/2\ Dial Display,Oil Filled Pressure Gauge,Water Pressure Gauge.Female 3/4\ GHT Garden Hose Thread.

  • ...tings.Works for Standard 1/4 OD RO Tubings for Water filtration System.
  • ★Multi-Function: This water pressure test kit is mainly used for measuring water filter pump/holding tank pressure of whole-house reverse osmosis water filtration system.But this pressure gauge itself can be also used for compressed air system/hydraulic system/ outdoor irrigation pump in irrigation system/pool pump and filter etc,even beer pressure fermentation..
  • ★Notes:1,The air bubble at the top of the gauge face is normal by design,the gauge is faulty if without bubble.
  • 2,No need to cut the rubber plug on the top of the meter as that will open the meter to possible infiltration of particulate contaminants and moisture, as well as allow the glycerin to leak out.
Check Stock

Mophorn Air Hydraulic Pump 10000 PSI Air Over Hydraulic Pump 1/2 Gal Reservoir Air Treadle Foot Actuated Hydraulic Pump 3/8\ NPT with 6 ft Hose 2 Connector Single Acting for Car Repair (Blue)

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 103 cubic inches / 1.7 liters(1700 cc), 0.45 gallons, Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality metal shell to handle tough industrial applications. 1.6L ± 0.1L oil tank has a larger capacity with 103 cubic inches / 1.7 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Durable Oil Pipe Included: This hydraulic air pump is equipped with a 6.5 ft / 2 m hi....
Check Stock

Mophorn Air Hydraulic Pump 10000 PSI Air Over Hydraulic Pump 1/2 Gal Reservoir Air Treadle Foot Actuated Hydraulic Pump 3/8\ NPT with 6 ft Hose 2 Connector Single Acting for Car Repair (Orange)

  • Fundamental Parameters: The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic Inches / 1.6 Liters(1600 cc), Max Input Air Pressure: 120 psi / 8 bar, Fuel Tank Capacity: 1.6L ± 0.1L, Maximum Oil Output: 1.3L, Oil Output Pressure: 75mpa..
  • Foot-Actuated Design: The air hydraulic pump adopts a user-friendly foot-actuated design to provide hands-free operation for pumping and releasing the load, saving the operator's time and effort with strong power and high output pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Sturdy & Compact Construction: This air hydraulic foot pump features an aviation aluminum pump core and a high-quality metal shell to handle tough industrial applications. 1.6L oil tank has a larger capacity with 98 cubic inches / 1.6 liters output oil. Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • Oil Pipe & Spray Gun Included: This hydraulic air pump is equipped with a 1.25 m / 4 ft high-pressure oil pip....
Check Stock

Longray SP4A Stainless Steel Sprayer, 1 Gallon, Metallic

  • 【All Stainless Steel Structure】- the pump, box, cover, rod, pump handle and rod handle are all made of durable stainless steel. Braided durable hose， not cheap plastic - with Viton seals and gaskets.
  • 【HAND-PUMPED SPRAYER】- This sprayer boasts large flow piston rod with humanized handle, it is designed for easy use and also for quickly building up air pressure with no need for outlet or extension cord.adjustable spray is perfect for misting.
  • 【WIDE-MOUTH WATER INLET】- This sprayer boasts valve and pressure gauge that can provide convenience and ensure safety.Large Wide Mouth opening allows for easy filling and cleaning and less spilling..
  • 【FOR MULTI-PURPOSE】- Built-in fast and accurate pressure gauge, suitable for the actual needs of industry, agriculture, commerce and medicine.
  • [Note]-We provide 1 gallon 1.5 gallon 2.5 gallon 3 gallon 3.5 gallon stainless steel sprayer, blue film, the film is scratch-resistant and does not need to be torn.
  • the liquid is on the piston rod, only hydraulic spraying is required.
Check Stock

VEVOR 15 Ton Hydraulic Knockout Punch Kit, 1/2" to 4" Conduit Hole Cutter Set, KO Tool Kits W/Puncher 10 Piece, Metal Sheet Driver Tools, for Aluminum, Brass, Stainless Steel, Fiberglass and Plastic

  • Complete Punch Tool: Unleash your inner DIY master with this comprehensive hydraulic punch kit! With a hydraulic punch, 10 punches and dies, a step drill bit, a sturdy carrying case, 2 draw studs, a piston shaft, a spacer, and sealing rings, you'll have everything you need to attack a range of projects. The conduit fitting sizes range from 1/2" to 4". Max punching thickness for soft carbon steel plate: 0.1" (10 gauge).
  • Max punching thickness for stainless steel plate: 0.08" (14 gauge)..
  • Efficient Hydraulic 15T: Get the job done faster and more efficiently with our powerhouse hydraulic mechanism pump! The hydraulic mechanism pump produces 15T strong pressure, providing high punching accuracy and fast punching speed. Compared with standard wrenches, our knockout punch set is more labor-saving and efficient, ideal for completing big projects. The ram's angle can flexibly change to meet your various punching needs. It is also perfect for use in narrow places..
  • Built to Last: Made from a sturdy combination of 40 Cr steel and 45# steel, you can trust in its strength, sturdiness, and longevity. The stable construction is suitable for heavy-dut....
Check Stock

Enerpac P-392 2 Speed Lightweight Hand Pump

  • High-pressure, lightweight hydraulic hand pump for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately).
  • Glass-filled nylon reservoir and nylon-covered aluminum base provide corrosion resistance and are lighter than steel hydraulic hand pumps.
  • Internal pressure relief valve protects against overloading the pump.
  • Two-speed operation requires fewer handle strokes than single-speed hydraulic hand pumps.
  • First-stage pressure rating of 200 psi and second-stage pressure rating of 10,000 psi.
Check Stock