ReviewsHydraulic Quick Fitting

Jienk 5PCS Pneumatic Male Straight 1/2\ Tube OD x 3/8\ NPT Thread Push to Connect Air Fittings, Quick Connector for Air Ride Air Horn Air Compressor

  • 【Durable】This fitting has nickel plated brass body with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
  • 【Convenience】360°rotation, after installation, the tube direction can be changed easily. This fittings have hexagonal body allowing tightening with wrench, additionally can be screwed with Allen tool, which is especially convenient where there is limited access to installation place..
  • 【Wildly Application】 Working Temperature: 32~140°F. This male straight quick release air fitting is most used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, Industrial, Automotive Assembly, Printing, Packaging, Aircraft Controls, Textile. As well as moving parts such as cylinders, air bag and air suspension..
Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

  • Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
  • Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
  • Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
  • Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
  • Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check Stock

1/2\ Skid Steer Bobcat Flat Face Hydraulic Quick Connect Couplers w Dust Caps,1/2\ NPT Thread+ 1/2 Body Hydraulic Couplers for Skid Steer Bobcat Case/Kubota/New Holland

  • The flat face hydraulic couplers with 1/2" NPT thread+ 1/2 body. The hydraulic quick connect coupler is an ISO 16028 flat face style, fits all standard flow skid steers attachments. Impoved design high flow performance and maximum service life..
  • The universal hydraulic quick disconnect coupler & plug interchange with most models of skid steers loaders including Bobcat Case / New Holland, Kubota couplings which made to ISO 16028 standard.
  • Applications:This flat face couplers connect used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,construction,industrial hydraulic lines..
  • The flat face hydraulic quick connect couplers is valve design and structure for minimize pressure adrops and fluid losses. Sleeve locking mechanism prevents accidental disconnection..
  • Our bobcat skid steer hydraulic couplers are made by heavy duty harden steel construction with zinc nickel plating for superior corrosion resistance. 5076 PSI Rating , 12-23 GPM Flow Rate. Warm Tips: Make sure relieve all pressure on the skid steer from the lines before connect/disconnect them.Just line up the flat faced hyd fittings and push couplers to gather,male to female, female to ma....
Check Stock

VEVOR 15 Ton Hydraulic Knockout Punch Kit, 1/2" to 4" Conduit Hole Cutter Set, KO Tool Kits W/Puncher 10 Piece, Metal Sheet Driver Tools, for Aluminum, Brass, Stainless Steel, Fiberglass and Plastic

  • Complete Punch Tool: Unleash your inner DIY master with this comprehensive hydraulic punch kit! With a hydraulic punch, 10 punches and dies, a step drill bit, a sturdy carrying case, 2 draw studs, a piston shaft, a spacer, and sealing rings, you'll have everything you need to attack a range of projects. The conduit fitting sizes range from 1/2" to 4". Max punching thickness for soft carbon steel plate: 0.1" (10 gauge).
  • Max punching thickness for stainless steel plate: 0.08" (14 gauge)..
  • Efficient Hydraulic 15T: Get the job done faster and more efficiently with our powerhouse hydraulic mechanism pump! The hydraulic mechanism pump produces 15T strong pressure, providing high punching accuracy and fast punching speed. Compared with standard wrenches, our knockout punch set is more labor-saving and efficient, ideal for completing big projects. The ram's angle can flexibly change to meet your various punching needs. It is also perfect for use in narrow places..
  • Built to Last: Made from a sturdy combination of 40 Cr steel and 45# steel, you can trust in its strength, sturdiness, and longevity. The stable construction is suitable for heavy-dut....
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • ...er cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
  • 5.Professional installation recommended: PTFE hose ....
Check Stock

Permatex 80632 Thread Sealant with PTFE, 4 oz. , White

  • Economical general-purpose fitting sealant.
  • Seals and resists pressure in air, oil, diesel fuel and hydraulic systems.
  • Remains pliable at higher and lower temperatures.
  • Suggested Applications: Air conditioning fittings, temperature sending fittings, hydraulic fittings.
Check Stock

TrackStar Turnigy 13.5T Sensored Brushless Motor 3040KV Roar Approved

  • Premium Material: The hydraulic steering helm comes with high-strength aluminum alloy material, which is lightweight, anti-aging, corrosion-resistant,....
  • Optimal Hose Fitting: The adjustable stainless steel O-ring fittings will simplify the installation process and allow for simple reorientation after....
  • Considerate Details: The hydraulic helm pump is equipped with the replaceable shaft seal, the built-in lock valve, relieve valve, and air pocket.....
  • Complete Accessories: The hydraulic steering pump has a complete accessories kit for durable structure. It includes ball bearing piston race,-5 ORB....
  • Wide Application: This outboard helm pump is suitable for boats rated to a maximum of 300 HP. It can be used in mechanical/manual steering for yachts,....
Check Stock

Quafwia 2 pcs Aluminum cam lock fittings (2\ Part A) cam groove hose fitting camlock fittings , Male Adapter Female NPT Thread camlock fitting (2‘’)

  • The Body is made by Gravity Casting, it is stronger body..
  • Adapts NPT thread to male cam and groove-style fitting.
  • For use with water, hydraulic oil, coolants, gasoline, and petroleum products.
  • Complies with Commercial Item Description A-A-59326D for quick disconnect fittings.
Check Stock

NA Black Hydra Krimp 71500 AC Hose Crimper

  • The lightweight hand-held hydraulic press is very portable..
  • Crimping pipes and fittings in an easy and labor-saving way..
  • The kit is applicable for beadlocking fitting and barrier A/C hose..
  • The dies snap quickly into the press fixture requiring no pins or screws..
  • Wide Application: The hydraulic crimper is ideal for shop and field operations, crimping pipes and fittings in an easy and labor-saving way. Customize....
Check Stock

48x Cyclone Natural Pre Rolled Grape Toasted Hemp Cone 24x 2 Packs Non Tobacco

  • SPECIFICATION - Inside Diameter – 3/4” Diameter | Length - 165 Feet Long | Color - Black | Pitch - 20mm/0.79” | Material - HDPE (High-Density....
  • HEAVY DUTY HYDRAULIC HOSE SPIRAL WRAP - Kable Kontrol Cyclone HDPE hydraulic hose wrap is ideal for Heavy Duty bundling and hydraulic hose protection,....
  • MSHA CERTIFIED & UV RESISTANT - Cyclone heavy duty spiral hose wrap is MSHA certified and UV resistant. Cyclone hydraulic hose spiral wrap protects....
  • UNIQUE FEATURES - Kable Kontrol Cyclone Heavy duty hose protector tubing have rounded edges for reduced risk of exposed sharp edges. This Heavy duty....
  • COST EFFECTIVE & QUICK METHOD - Cyclone Spiral tubing serves as a cost-effective and quick method for minimizing heavy production losses. Developed to....
Check Stock

TIKSCIENCE Bleed Tube with Bridge Tube for Seastar Hydraulic Steering Systems Hydraulic Steering Filler Kit

  • Application - Hydraulic steering filler bleed tube kit fit Seastar hydraulic steering systems.
  • Package Includes: Bleed kits include bridge tube and bottle to tube, used to replenish the steering system fluid of ships, hose with screw cap which....
  • Save Your Money - Hydraulic steering filler kit used to replenish oil for the ship's steering system fluid, entire steering system remains sealed....
  • Simple to Use - Connect the steering fluid bottle to the fitting with the adapter hose and vent the bottle per the instructions on the hose and bottle....
  • Service - Undergoes more stringent testing than aftermarket products, you will get a 90-day shelf life for our store. If you have any questions about....
Check Stock