ReviewsHydraulic Rod End

Hydraulic Adjustable Variable Flow Control Valve, 0-30 GPM, 3/4” NPT Port Size

  • SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
  • VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
  • ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
  • ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
  • HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..
Check Stock

Detroit Axle - 4x4 Front Upper Control Arm w/Ball Joints Tie Rods Replacement for Ford F-150 F-250 Expedition - 8pc Set

  • Front End Kits Compatible With 4WD Models Only.
  • This Kit Includes: 2 Pcs upper control arm with ball joint, 2 Pcs Lower Ball Joint, 2 Pcs Front Outer Tie Rod End And 2 Pcs Inner Tie Rod End.
  • Replacement For 4x4 Only - 1997 1998 1999 2000 2001 2002 Ford Expedition Front end rebuild kit. 1997-2003 Ford F150 Front end suspension kit,....
  • Designed With Premium Quality Materials For Exceptional Performance, Reliability And Peace Of Mind. With Suspension rod, inner tierod, ball joint....
  • 10 Year Warranty on all Detroit Axle Front End Suspension Kit, Upper Control Arms, Lower Ball Joint, Outer tie rod end and Inner Tie Rod End..
Check Stock

OEMTOOLS 27178 Master Inner Tie Rod Tool Set Remove & Install Tie Rods in Cars Pickups and SUVs Includes 12 Crowfoot Adapters & 1/2 Inch Drive Tube

  • INNER TIE ROD REMOVAL TOOL SET: This tie rod kit Includes 12 sizes of crowfoot-style adapters: 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2" and....
  • ULTRA DURABLE: Tie rod puller tool's crowfoot adapters are nickel plated for durability.
  • Work the inner tie rod tool kit on your tierod end with the....
  • WIDELY USEFUL INNER TIE ROD TOOL: Be sure you have an inner tie rod kit that can easily reach your inner tie rod without removing the rack and pinion.
  • USE A RATCHET OR BREAKER BAR: Properly torque the inner tie rod remover on the tie rod end without hassle.
  • Tie rod end puller's 1/2 Inch drive tube....
  • EFFORTLESS ORGANIZATION: OEM Tools inner tie rod tool can be taken anywhere easily.
  • Tie rod end removal tool comes in a blow mold case for easy....
Check Stock

Happybuy Hydraulic Pump Electric Double Acting Manual Valve Hydraulic Pump 10000 PSI Electric Hydraulic Power Unit for Home and Commercial Using (Double Acting)

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min..
  • Large Capacity Tank: With a large fuel tank capacity, 8L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The pump uses 16th hydraulic oil. It has the advantages of compact size, lightweight, simple structure, and ease of use..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the hydraulic pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this double-acting hydraulic gear pump by a lever which has a rubber cap in one end for a comfortable grasp and use. Control two equipment at the same time, pretty efficient. The oil pipe coupling is fitted with a PT3/8” thread..
  • Various Application: The manual hydraulic pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. ....
Check Stock

Beauty Life Salon Styling Chair Hydraulic Barber Chair Beauty Chairs for Hair Stylist Hair Salon Equipment

  • High quality PVC material in black covered the entire chair. Great looking design upgrade any salon..
  • The salon chair is equipped with a high-strength hydraulic pump(Never put it in backwards), which gently steps on the lifting rod to discharge the air from the hydraulic pump.
  • The salon chair is filled with high-density sponges, soft backrests and cushions give you a comfortable sitting feel, high-quality PU leather is easy to clean..
  • Seat width: 19'', Chair width: 24'', Seat depth: 20'', Min/max seat height: 18.5''~25'', Load capacity: 330lbs.
Check Stock

Happybuy 10152 PSI Hydraulic Electric Pump 750W Single Acting 110V Solenoid Pedal 7L Hydraulic Power Pack Cylinder

  • Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min..
  • Large Capacity Tank: With a large fuel tank capacity, 7L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The hydraulic pump tank uses the 15th hydraulic oil. It has the advantages of compact size, lightweight, and simple structure..
  • Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
  • Effective Oil Volume: Manage this single acting electric oil pump by a lever which has a rubber cap in one end for a comfortable grasp and use. The high-pressure oil pipe is of high quality and durability. The oil pipe coupling is fitted with an M10 thread. Connector Type: 3/8" NPT ISO 14540 quick hydraulic coupler with dust cap..
  • Various Application: The pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending,....
Check Stock

Hydraulic Welded Bottle Jack 50T(110,231lbs) Capacity for Auto Repair and House Lift, Red

  • ...TIING HEIGHT】In addition to the height of the jack body (10.23in), the piston rod (5.9in) and screw rod (2.36in) can be raised to increase the stroke, so that the jack can be lifted higher (up to 18.5in) to a wider range of uses..
  • 【HIGH/LOW-TEMPERATURE RESISTANCE】The hydraulic system uses high-quality lubricants for better corrosion resistance and high/low-temperature flexibility allowing it to operate at temperatures between -4°F and 113°F..
  • 【COMPACT AND PORTABLE】Its compact size is suitable for narrow and low working spaces, and can be easily carried in the trunk of a vehicle. In addition, the bottle jack has a handle that makes it easy to move and carry to any location. .
  • 【HIGH SAFETY】The bottle jack is equipped with a safety valve that can automatically protect the hydraulic system in case of overload to prevent damage to the jack. At the same time, the height-limiting device prevents over-pumping and gives you safety assurance. The bottle jack uses a rubber oil plug with a seal inside, which ensures a good seal against oil leakage..
Check Stock

Kenney Twist & Fit No Tools Tension Shower Curtain Rod, 42-72\

  • No tools required, no damage to walls or tile.
  • Heavy duty steel tension rod with non-slip, non-scratch end caps.
  • Note: Item has one end cap on each end of the rod.
Check Stock

XIXIAN Hydraulic Jack,Hydraulic Trolley Service/Floor Jack 2Ton Capacity Car Jack Automobile Repairing Tire Changing Lifting Tool with 140-290mm Height Labor-Saving

  • Heavy-duty hydraulic jack made of high-quality iron, the surface with anti-oxidation paint, strong, wear and corrosion resistant, long service time..
  • Thickened piston rod, support greater tonnage, more secure and labor-saving. Hydraulic lifting arm to ensure that the jack is more stable in the lifting process..
  • Longer lifting rod with ergonomic design, more labor-saving. Steel wheels, balanced forces, more flexible movement, strong load-bearing capacity..
  • With 2 tons(4400lbs) of load-bearing capacity, the minimum lifting height of 140mm, the maximum lifting height of 290mm..
  • Compact size, easy to store and carry, very suitable for car, truck, SUV, etc..
Check Stock

Detroit Axle - Front Quick Struts & Coil Spring Assembly + Sway Bar Link + Inner & Outer Tie Rod End w/Boots Replacement for 2003 2004 2005 2006 Toyota Tundra - 10pc Set

  • Compatible With 2003 Toyota Tundra 2004 Tundra Shocks 2005 Tundra Struts 2006 Toyota Tundra Struts. Front Struts Complete Assembly Pair Sway Bar End Links Front Sway Bar Link Inner Tie Rod Outer Tire Rod End Boots.
  • This Kit Is Direct Replacement For All Models For 2003-2006 Toyota Tundra. Amortiguadores Delanteros Front Struts And Shocks Complete Assembly Strut Assembly Inner Tie Rod End Outer Tierod.
  • This Kit Inludes Front Strut Kit & Coil Spring Assembly, Front Sway Bar Link Kit. Strut Mount Kit Strut Spring Assembly Front Spring Front Coil Spring Stabilizer Sway Bar Barra Estabilizadora Delantera Tie Rod End Boots.
  • Compatible With 2004 Toyota Tundra Front Struts 2005 Toyota Tundra Front Struts 2006 Tundra Front Struts. Front Strut Assembly Coil Struts Stabilizer Bar Link Tire Rod Front Tie Rod End.
  • 10-Year Warranty. Detroit Axle Is A Leading Supplier Of Brake Kit, Front Suspension Kits. The Parts In This Kit Are Compatible With Toyota Tundra Front Strut Assembly Full Set Sway Bar Link Strut. Strut Coil Spring Assembly Sway Bar End Link Front Strut And Spring Assembly Stablizer Link Sway Bar Stabilizer Link Tie Rod Assembly.
Check Stock

VEVOR Hydraulic Gear Puller 15 Ton Max Capacity Hydraulic Puller 2 or 3 Jaws Bearing Hub Separator 3.9 - 11.8 Hydraulic Puller Separator Tool for Pulling Hubs Flanges Gears Bearings

  • Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time..
  • Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool..
  • Bidirectional Operation: The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has 2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread..
  • Humanized Design: Equipped with a security relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility..
  • Diverse Scenario: A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc..
Check Stock