ReviewsHydraulic Sealing

VEVOR Bottle Jack 32 T Car Jack Hydraulic Floor Jack 70500LBS with Manual Hand Pump Pneumatic Air Jack Heavy Duty Auto Truck Travel Trailer Repair Lift

  • Heavy Lifting Capacity: Maximum load can reach up to 32 tons. The lifting height adjusts from 10.4" to 16.7". Featured with multi-layer seals and fully polished and chromed cylinder rams, the air hydraulic bottle jack ensures a good sealing performance and reliable operation..
  • Pneumatic/Manual Operation: Dual operation method is available, manual operation and pneumatic operation. The 32-ton air bottle jack can connect to an air compressor for easy and labor-saving lifting operations. Plus, the high lift bottle jack also comes with a detachable handle for manual lifting in the absence of an air compressor..
  • Flexible & Reliable Lifting: The height of the air hydraulic jack can be adjusted flexibly from 10.4" to 16.7". High strength piston rod allows for powerful lifting capacity. The non-slip head holds the load securely. With two throttle return springs, the 32-ton air hydraulic bottle jack can be automatically reset after use..
  • Heavy-duty Steel Structure: Made of sturdy metal, this hydraulic bottle jack provides a reliable and strong lifting capacity. In addition, the lacquered surface is rust-proof, not easy to wear. The thick and wide base provides stable support, easily cope with heavy loads..
  • Diverse Application: This hydraulic bottle jack with ....
Check Stock

12pcs Flat Rubber Washers Rubber O Ring Seals Water Pipe Connector Replacement for Faucets and Shower Head(1/2 inch)

  • [Material] These washers are made of high quality rubber material, they are durable and has longer service life..
  • [Good Sealing] The rubber rings can work greatly as sealing washer and plug washer set, they have good sealing performance, high reliability and great durability..
  • [12Pcs] There are total 12pcs rubber washers, they are good replacement for your old or broken one..
  • [Application] They are specially designed for fastener, plugs, water and hydraulic fittings. They have great solid quality for DIY lovers to make, fix and modify things..
Check Stock

O-Ring BOSS Hydraulic SAE 212 Pieces Oring Seal Kit Buna-N 90A for Boss Tube Fitting Application Hydraulic Fitting Hydraulic Pumping Sealing Straight Thread Tube Fittings

  • High Quality: Made of Buna-N 90D (NBR) material,are durable,high temperature resistance,anti static,oil resistant,UV resistance,heat resistant,wear resistant,exceptionally.
  • Multi Size: You can get a good selection of 20 different sizes o ring that come in handy,can meet almost all your needs..
  • Wide Application: Use for boss tube fitting application,hydraulic fitting,hydraulic pumping,sealing straight thread tube fittings, hydraulic/pneumatic motors, cylinders,.
  • Handy Packing: Comes with a heavy duty storage case that keeps each size o rings separated and organized,that makes more convenient to carry, select and collect..
  • Customer Service: You are unhappy for any reason, return your kit with no questions asked and we will provide a full refund..
Check Stock

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

  • 150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
  • Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
  • Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
  • Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
  • Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....
Check Stock

Captain O-Ring BOSS Hydraulic SAE 900 O-Ring Seal Kit (Buna-N 70-255 Piece Kit)

  • Includes high quality BN70 (Buna Nitrile 70 durometer) o-rings - the most common o-ring material.
  • Used in sealing straight thread tube fittings (BOSS Type) in hydraulic equipment.
  • O-Rings are conveniently sorted by size in individual compartments..
  • Assembled in the USA. Manufactured and Warrantied by Captain O-Ring LLC, with decades in a sealing and chemical industry.
Check Stock

2 Stage Transmission Jack 1600lbs Capacity, 2 Springs Load Hydraulic Jack, 360° Swivel Wheel Garage/Shop Lift Hoist with Brakes, Red

  • 【1600 LBS Load Capacity】: Telescopic 2 stage hydraulics upgrade 2 reinforced springs with 1600lbs load capability for greater lift range, precise load control and rapid lift.Upgrade 2 bolts with pull rings to help you reset 2 stage telescoping transmission jack manually..
  • 【High Quality】: From the highest grades of rugged steel, to the wear-resistant Y-style sealing rings, to the super strong QT 450 Nodular Iron hydraulic pump, right down to the high/low temperature-resistant (40°F to 105°F) hydraulic oil. We uses quality components built to exacting standards to deliver top performance and reliability of transmission jack..
  • 【Precise Positioning】: Adjustable saddle provides a wide tilt range that helps you get the load in the perfect position. The tray can be tilted 30-degree. Adjust the angle and place you need by screwing the adjustment bolts. Set yourself up for success, control where you want to be and how you want to get the job done..
  • 【Stable and Easy to Move】: The transmission jacks' sturdy base increase 2 brakes for 4 heavy-duty 360º swivel casters to prevent the sliding during use. Adding effortless maneuverability. Once your jack is in place, the smooth, manual-operated hydraulic system makes easy work of lifting and low....
Check Stock

LJSF Washer 50Pcs Rubber O-Ring Gaskets Assorted Sizes Set Kit for Plumbing Tap Seal Sink Thread Rugged and Durable, Strong Sealing

  • Used for faucet faucet sealing groove sink sealing thread.
  • Ideal for plumbing engineering where aluminum dart barrels, faucets, and sinks are sealed.
  • The kit contains 50 assorted parts in 12 most commonly used sizes.
  • For pipe, hydraulic and air and natural gas fittings.
Check Stock

Testing Coupling Adapter, G1/4 to M16*2 Thread Pressure Test Point Testing Coupling Adapter for Hydraulic System Test Point Adapter

  • ★★★【Widely Applicable】- This series of products are widely used in hydraulic system pressure detection, lubrication, exhaust, pressure system oil sampling..
  • ★★★【Long Service Life】- This test adapter is made of high quality carbon steel and stainless steel material, sealing by good sealant, with long serving life..
  • ★★★【High Quality】- It can withstand high pressure, and great temperature resistance..
  • ★★★【Excelent Performance】- Advanced structure, reliable sealing, no oil leak..
  • ★★★【Portable】- Small size, light weight, easy to use..
Check Stock

VEVOR Hydraulic Steering Cylinder 300HP, Hydraulic Steering, Front Mount, Hydraulic Outboard Steering Cylinder for Marine Boat Steering System

  • Max Working Pressure: 10.3Mpa: The hydraulic steering cylinder for outboard has a working pressure of up to 10.3Mpa, about 1500psi..
  • Advanced Crush Resistance: State of the sealing system offers superior resistance to repeated compression set and is designed to better withstand the harsh environment..
  • Built-In Two-Way Lock: The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion..
  • Easy to Install: This steering cylinder includes positionable stainless steel O-Ring (ORB) fittings for easy hose routing. We made this design also for easy installation and replacement..
  • Wide Application: Suitable for ships under 300 horsepower, outboard-powered boats like the center console, offshore fishing, bass boats, flats boats, and many more..
Check Stock

VEVOR Hydraulic Long Ram Jack, 8 Tons/17636 lbs Capacity, with Dual Piston Pump and Clevis Base, Manual Cherry Picker w/Handle, for Garage/Shop Cranes, Engine Lift Hoist, Red

  • Handles up to 8-Ton/17636 lbs: This 8-Ton capacity long ram hydraulic jack helps you convert your existing hoist to a convenient and fast one. A quick way to raise loads without the backache. A must-have for hydraulic cranes, engine hoists, and a wide variety of applications..
  • 26″ -45.7″ Lifting Range: Minimum height: 26 in/66 cm. Maximum height: 45.7 in/116 cm. The long ram hydraulic round bottom jack provides an ample 19.7 in/50 cm stroke for the optimal lift of objects up to 8 tons/17636 lbs. in weight. And the slow release function for reliability and security..
  • Reliable & Durable Jack: Large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life. The piston-ram is treated and polished to resist skiving and utilizes a Y-Style polyurethane sealing ring with a backup ring, preventing the load from falling slowly or bypassing oil drift..
  • Labor-saving Long Ram: Long ram jack features a convenient handle with a rubberized comfort grip. Clevis style base allows the jack mounts directly onto most shop cranes. And the pressure dual pump is designed to lift with minimal muscle and effort..
  • Sturdy Steel Construction: Durable frame is constructed of high-grade steel an....
Check Stock

Taixinhyd Hydraulic 1/4''NPT 7250 PSI KHB High Pressure Ball Valve

  • 1/4 inch NPT thread female connect ball valve.
  • Suitable for hydraulic and water Applications.
Check Stock