ReviewsHydraulic Steel Tubes

CONHIS MOTOR Bicycle Air Suspension Front Fork DNM USD-8S Triple Crown DH Downhill Mountain Bike Fork 110 x 20mm Wheel Axle for 24'' 26" and 27.5" Dual Disc Brake

  • ...eight spring damper designed and manufactured for fast downhill bikes. Its inner and outer tubes, upper and lower plates, left and right legs are made of aluminum alloy with high strength and light weight, and the interior is designed with spring and oil pressure damping..
  • Hydraulic Damping System--The hydraulic damping system is inside the front fork right tube, that is, damping force generated by reciprocating motion of piston and valve plate in hydraulic oil is used to suppress vibration and impact caused by acceleration and deceleration of vehicles and road bumps. The internal damper adopts wear-resistant, low freezing point,special oil for high quality shock absorber to ensure the damping stability and reliability..
  • ⭐⭐Alloy Steel Spring Design--High strength alloy steel spring design is used inside the front suspension left tube, which can reduce weight and support the rider's weight compared with the conventional spring, so as to meet the various needs of your daily riding..
  • Multi Function--200mm travel, for MTB bicycle wheels, 26/27.5/29 -inch beach bike/snow bicycle/E bike/MTB/dirt bike, etc. The front suspensio....
Check Stock

Porto-Power B65115 Black/Red Hydraulic Body Repair 19 Piece Kit - 10 Ton Capacity

  • Automatic pump overload system protects against damage to rams and equipment.
  • Heavy-walled extension tubes stand up in the toughest situations.
  • Flex head features permanently molded rubber pad - interlocked to prevent seperation.
  • 1/2 ton capacity hydraulic spreader features 2" jaws and spreads from 5/8" to 3-3/4".
Check Stock

ZELCAN 64 Pc Hydraulic Hose Tube and Pipe Fitting Kit, 37 Degree JIC Cap and Plug Assortment Kit, Heavy Duty Seal Adapter Set w Precision Threading, Steel Flare Fitting Set, Dash Sizes 4 6 8 10 12 16

  • 64 Fittings: This 64-pc. JIC hydraulic cap and plug kit gives you plenty of fittings in the 6 most commonly needed dash sizes: -04, -06, -08, -10, -12, and -16.
  • Superior Quality: Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments.
  • Easy to Use: These JIC caps and plugs have precision-engineered standard threading to install smoothly, seal your hoses, tubes, and pipes hermetically, and come off cleanly.
  • Easy to Organize: This tool set's blow-molded case has a chart for easy identification of the various sizes and foam lining to protect your pieces from wear in transit.
Check Stock

VEVOR 12 Ton Porta Power Kit, Hydraulic Ram with Pump with 4.6 ft/1.4 m Oil Hose, Portable Hydraulic Jack with Storage Case for Automotive, Garage, Farm, Mechanic (26455 LBS)

  • Boost your Bull-Work Efficiency: The VEVOR porta power kit with a 12-ton hydraulic pump is the ultimate heavy-lifter you need for all your repair needs. The automatic overload system prevents any damage to the equipment or rams, while the hydraulic spreader with a 1/2 ton capacity makes all your repairs a breeze. Get your hands on this powerhouse today!.
  • Leak-Proof and Rust-Proof: No more worries about oil leakage or rusting with the TPU seal and electrostatic powder spraying. The porta power kit is designed to provide sufficient working pressure while ensuring a long-lasting finish. The paint is resistant to oil, grease, and dirt, making cleaning easy even after extensive use..
  • Perfect for All Your Needs: The portable hydraulic ram kit includes everything you need to complete your repair work! Hydraulic pump, hydraulic ram, 4pcs extension tubes, serrated saddle, rubber head, V-shaped head, wedge head, connector, flat base, hydraulic spreader, spreader ram toe, plunger toe. You will be ready to take on any project without breaking a sweat..
  • Tough Blow-molded Carrying Case: Every great tool needs a great box. Crafted from HD....
Check Stock

Keenso Bike Pipe Cutter, Portable Oil Tube Cutter Bike Pipe Disc Cutting Tool to Cut Bike Hydraulic Disc Brake Oil Tubes

  • 【Major Function】I have to tell you the truth: this bike pipe cutter is mainly used to cut bike hydraulic disc brake oil tubes. If you want to change a new bike oil tubes, maybe you will remind this one as soon as posible. This mini oil tube cutter can help you quickly finish this cutting task with fewer time spending and comfortable operation process.
  • 【Easy to Control and Operate】This bike pipe disc cutting tool is very easy to control and operate, and safe to use. The shell can provide a protection for you and your bike, and it can reduce the unnecessary scratches to your bike's pipe. Therefore, you can feel free to use it.
  • 【Good Effect of Cutting】What I have to emphasize is the great effect of cutting. Compared with other cutting tools, the outstanding advantage of this bike hydraulic disc brake oil tubes cutter is quick-acting without burrs. This superior feature can provide you a stable and reliable working environment to repair your bike.
  • 【High Quality】As I am said, this bicycle pipe cutters has the superior characteristic of quick-acting, not easy to deform. The shell is made of high quality ABS plastic, the cutting has strong hardness. What's more, it has slightweight, compact structure, very convenient for you to carry or store.
Check Stock

Exhaust Headers Manifold 1-5/8 in. Mild Steel for 2002-2013 Silverado Sierra Suburban Tahoe Yukon Escalade 4.8L 5.3L 6.0L 6.2L V8

  • Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes.
  • Most efficient at providing horsepower gain from idle to mid-range RPM.
  • Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) cold roll flash mild steel.
  • Head flange laser-cut from 3/8-inch (9.5mm) thick steel plates and flattened by hydraulic press.
  • All joints TIG welded for great resistance against cracking and wearing.
  • Hi-temp paint that holds up to 500C or 932F.
Check Stock

BestEquip 5500lbs Hydraulic Car Ramps Auto Truck Service Ramp Hydraulic Lift Car Ramps Extra Two Handles 1-Pcs Red

  • Heavy-Duty Hydraulic Ramp: Built by high-quality steel material, the hydraulic steel car ramp ensures durability and longevity.  Long and lasting....
  • 2.5T Vertical Lifting Capacity: Maximum Weight Capacity: Can lift up to 5500lbs. The hydraulic jack help to adjust the height flexibly.....
  • High Strength Reinforcement: The whole ramp is steel construction with high strength and hardness. Meanwhile, we have added angle steel on both sides....
  • Thoughtful Design: We considerately provide two handles for convenient controlling the hydraulic jack, and trapezoidal hydraulic ramps are easier to....
  • Wide Application Area: Suitable for outdoor or indoor use. This steel car ramp is perfect for various occasions such as garages, sheds, or shops,....
Check Stock

Anbull 10 Ton Porta Power Hydraulic Jack, Upgraded Hydraulic Combined Multifunctional Jack for car Repairs,Auto Body Frame Repair Kit

  • 【Stability and Convenience】 The pump body of this hydraulic jack uses upgraded SEA#1045 steel. The oil passage will not have iron slag, and the new design of the oil passage is more stable. The pressure bar of the hydraulic portable ram kit adopts an integrated type pressure bar, which is beautiful and easy to use.The steel core of the cylinder is chrome-plated, which is more precise and wear-resistant and has a long service life..
  • 【Long Service Life】The hydraulic cylinder steel core of this 10 ton porta power kit is chrome-plated, precise, wear-resistant and has a long service life..
  • 【Stainless Steel Material】The pump of this porta power kit is made of stainless steel, with an industrial luster,which is stronger and harder to break,Compared with other hydraulic jack tool kit,our hydraulic power units give you even more long-term durability..
  • 【Multi-function Auto Body Frame Repair Kit 】Used for car, truck, farm and heavy equipment maintenance. Very suitable for various auto-body repairs, frame repairs and construction jobs..
  • 【Package Include】1x hydraulic hand pump, 1x round seat, 1x rubber ball, 1x V-shaped head, 1x wedge head, 1x connector, 1x flat base, 1x pressure nozzle, 1x ring claw, 1x extension foot, 1x hydraulic cylinder, 4x c....
Check Stock

VEVOR 4 Ton Porta Power Kit, Portable Hydraulic Jack with 3.9 ft/1.2 m Oil Hose, Auto Body Frame Repair Kit with Storage Case for Car Repair, Truck, Farm (8800 LBS)

  • Boost your Bull-Work Efficiency: The VEVOR porta power kit with a 4-ton hydraulic pump is the ultimate heavy-lifter you need for all your repair needs. The automatic overload system prevents any damage to the equipment or rams, while the hydraulic spreader with a 1/2 ton capacity makes all your repairs a breeze. Get your hands on this powerhouse today!.
  • Leak-Proof and Rust-Proof: No more worries about oil leakage or rusting with the TPU seal and electrostatic powder spraying. The porta power kit is designed to provide sufficient working pressure while ensuring a long-lasting finish. The paint is resistant to oil, grease, and dirt, making cleaning easy even after extensive use..
  • Perfect for All Your Needs: The portable hydraulic ram kit includes everything you need to complete your repair work! Hydraulic pump, hydraulic ram, 4pcs extension tubes, serrated saddle, rubber head, V-shaped head, wedge head, connector, flat base, hydraulic spreader, spreader ram toe, plunger toe. You will be ready to take on any project without breaking a sweat..
  • Tough Blow-molded Carrying Case: Our porta power kit comes with a blow-molded carryin....
Check Stock

Maxim A3107 Hydraulic Reservoir Tank - 7-Gallon Hydraulic Fluid Tank - Heavy Duty Hydraulic Tank - 12 Gauge Steel Hydraulic Reservoir with Temp Gauge - ¾” Mag Plugs, 40 lb, 12l x 12w x 12h, 202270

  • SPECS: Maxim’s reservoir tank with 7-gallon capacity and 12 gauge steel body has .75-inch mag plugs and is fitted with oil level gauges cum temperature indicators, filler breathers/basket strainers with suction and return ports on both sides..
  • IDEAL SIZE: Our hydraulic oil reservoir is a 7-gallon steel tank that is neither too large nor too small. It effectively dissipates heat while allowing trapped air bubbles to escape and slowing the velocity of returning hydraulic fluid..
  • PROTECTIVE: This hydraulic steel tank reservoir is fitted with a chrome filler breather and basket strainer. The tank allows enough breathing space for hydraulic fluid while filtering contaminants from downstream components..
  • MULTIPURPOSE: Fitted with oil level gauges cum temperature indicators, our hydraulic oil reservoir tank is a multitasking expert that can be used as a mounting surface for other hydraulic components. It's versatile and useful..
  • DURABLE: With a 12 gauge steel body powder coated black, this 7-gallon hydraulic tank reservoir can withstand surface corrosion from severe environmental factors. It can be used to store hydraulic fluids in accumulators, pumps, motors, etc..
Check Stock

11000lbs Hydraulic Car Ramps Extra Two Handles 1-Pair Black

  • Heavy Duty Construction: Built by high-quality steel material, the hydraulic steel car ramp ensures durability and longevity.  Long and lasting....
  • 5T Vertical Lifting Capacity: Maximum Weight Capacity: Can lift up to 11000lbs. The hydraulic jack help to adjust the height flexibly.....
  • High Strength Reinforcement: The whole ramp is steel construction with high strength and hardness. Meanwhile, we have added angle steel on both sides....
  • Thoughtful Design: We considerately provide two handles for convenient controlling the hydraulic jack, and trapezoidal hydraulic ramps are easier to....
  • Wide Application Area: Suitable for outdoor or indoor use. This steel car ramp is perfect for various occasions such as garages, sheds, or shops,....
Check Stock