ReviewsHydraulic System Installation

OLEQE Commercial Door Closers, Fast, Silent Switch, Suitable for Hotels, guesthouses, Indoor Wooden Doors, fire Doors, Double Open Wooden Doors, Office Safety Seamless Hydraulic Door Closers

Mute switch: This door close device adopts hydraulic buffer technology, hydraulic mute, switch mute, with accessories, easy to install, meet the requirements..
Preferable Material: This hydraulic door closer is made of cast aluminum, which is strong and stable, wear resistant and durable..
Adjustable Speed: The closing speed of this adjustable hydraulic door closer can be adjusted freely to meet different needs..
Embedded Installation: This commercial door closer adopts embedded installation, suitable for wooden doors, fire doors, etc. in hotels and guesthouses..
Safe and Seamless: Our hydraulic door closers close continuously and securely, ensuring successful door closing and preventing slamming..

Check Stock

Pro Lift Low Profile Transmission Jack - Heavy Duty Roll Under Floor Jack High Lift from 9 to 24 inches with 1100 Lbs (1/2 Ton) Capacity for Car Light Truck

Pro -Lift Transmission Floor Jack with 1100 lbs capacity is designed to be used as an aid in the removal and installation of automotive and light truck transmissions, transfer cases and transaxles..
The adjustable head can be tilted forward, backward and side to side for optimum alignment of transmission bolt patterns and pins.
Hydraulic system is protected from internal damage by a patented by-pass mechanism. Rugged steel wheels and full swivel ball bearing casters..
U.S. Patented built-in by-pass device protects hydraulic system from overpumping damage. Multi-adjustment knobs ensure that transmission cradle is always at the right angle to position and accept any load.
Load-restraining chain is vital for raising and lowering safety. Four wheel casters allow easy movement, positioning of transmission jack.

Check Stock

Melling JB-2079 Engine Valve Lifter

No Hassle Installation - Drop-in, retro-fit hydraulic roller lifters are ready for installation with no modifications or break-in required.
Precision Manufactured for Performance - Captured link bar system ensures precise lifter movement, increasing accuracy and performance.
Uncompromised Quality - Manufactured for reliability and durability for engines with a maximum operating range to 6200 RPM..
Fits Ford 221-260, 289, and 302 Small Block and 351 Windsor, 351 Cleveland/Boss 351, 351 Modified and 400 Modified.
Lifters are designed to meter the exact amount of oil for optimum performance.
Maintaining the precise lash needed to allow the camshaft to perform at its best.

Check Stock

catazer MTB Road HB-100 MTB Road Line Pulling Hydraulic Disc Brake Calipers Front & Rear Mountain Bike Disc Brake E-Bike Disc Brake 1 Pair Red

Braking System:Line Pulling Disc Brake Compatible Hydraulic Disc Brake.
Note: Do not remove the "yellow piston block" when installation, otherwise it will cause oil leakage or scrap the oil hydraulic disc..
Two reasons that will cause brake noise: 1) the wheels are not installed properly.
2) the disc rotor is not flat. Please note..
Suitable for mountain E-Bike,bikes, road bikes and folding bikes.

Check Stock

catazer MTB Road HB-100 MTB Road Line Pulling Hydraulic Disc Brake Calipers Front & Rear Mountain Bike Disc Brake E-Bike Disc Brake (1 Pair Black)

Braking System:Line Pulling Disc Brake Compatible Hydraulic Bike disc brake kit.
Note: Do not remove the "yellow piston block" when installation, otherwise it will cause oil leakage or scrap the oil hydraulic disc..
Two reasons will cause brake noise: 1) the wheels are not installed properly.
2) the disc rotor is not flat. Please note..
Suitable for mountain E-Bike,MTB, road bikes and folding bikes etc..
Weight:Front 199.6g,Rear:204.8g,Include Bicycle Disc Brake Pads.

Check Stock

NACHI Piston Pump

1.A10VO series of axial piston pump will have 35 MPa pressure pure hydraulic oil input to all kinds of hydraulic press, hydraulic motor and hydraulic system, to generate huge motivation.
2.This pump can be used as a hydraulic motor..
3. According to the needs, this pump has a variety of variable form. The oil pump, oil motor is widely used in ship, aviation, mining, metallurgy, casting, forging, machine tool of all kinds of machinery.
4. ts characteristic is small in volume, high efficiency, long service life, advanced design, compact structure, convenient maintenance..
5.We will arrange the faster express to deliver your order with free shipping（ DHL UPS FEDEX TNT EMS ）,you will receive it within 7~10days.

Check Stock

TIKSCIENCE Bleed Tube with Bridge Tube for Seastar Hydraulic Steering Systems Hydraulic Steering Filler Kit

Application - Hydraulic steering filler bleed tube kit fit Seastar hydraulic steering systems.
Package Includes: Bleed kits include bridge tube and bottle to tube, used to replenish the steering system fluid of ships, hose with screw cap which....
Save Your Money - Hydraulic steering filler kit used to replenish oil for the ship's steering system fluid, entire steering system remains sealed....
Simple to Use - Connect the steering fluid bottle to the fitting with the adapter hose and vent the bottle per the instructions on the hose and bottle....
Service - Undergoes more stringent testing than aftermarket products, you will get a 90-day shelf life for our store. If you have any questions about....

Check Stock

BUCKLOS Zoom MTB HB-100 Line Pulling Hydraulic Disc Brake Calipers Front& Rear with 160mm Rotor, Mountain Bike Disc Brakes Caliper with is/PM Adapter for E-Bike, Fat Bike

【Best upgrade】 6061 aluminum alloy T6 quenched bilateral drive hydraulic brake is not easy to rust and deform, convenient and quiet braking and high cost performance. It is the best choice for bicycle brake upgrade..
【Super power】Dual piston hydraulic brake calipers drive friction on both sides at the same time, which makes the force more uniform, and the brake disc is not easy to deform. Make your braking smoother and stronger..
【Durable】 Advanced resin brake gasket, double-sided polishing, super flat and durable, convenient braking and no noise..
【Easy installation】 The hydraulic brake can be installed out of the box, and the novice can also install it in five minutes. The travel screw can be adjusted manually to change the braking force and bring a more comfortable feel..
【Good heat dissipation】 The ventilation design of the rotor helps to keep the rotor clean, light weight and good heat dissipation effect of the system..

Check Stock

VEVOR Hydraulic Steering Cylinder 300HP, Hydraulic Steering, Front Mount, Hydraulic Outboard Steering Cylinder for Marine Boat Steering System

Max Working Pressure: 10.3Mpa: The hydraulic steering cylinder for outboard has a working pressure of up to 10.3Mpa, about 1500psi..
Advanced Crush Resistance: State of the sealing system offers superior resistance to repeated compression set and is designed to better withstand the harsh environment..
Built-In Two-Way Lock: The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion..
Easy to Install: This steering cylinder includes positionable stainless steel O-Ring (ORB) fittings for easy hose routing. We made this design also for easy installation and replacement..
Wide Application: Suitable for ships under 300 horsepower, outboard-powered boats like the center console, offshore fishing, bass boats, flats boats, and many more..

Check Stock

Fix Sinking Office Chair, Mellbree 304 Stainless Steel Chair Saver Kit Height-Adjustable Office Chair Saver for Stop Sinking Without Cylinder Replacement (with Hexagon Wrench)

...chair was damaged, the office seat kept sinking and could not maintain the desired height. Using Mellbree fix sinking office chair can solve this trouble, make the chair at the ideal height, easy to install and replace, save money and effort. Suitable for most office chairs, within the cylinder diameter of 25-28mm..
Installation steps: The chair saver kit uses screws to fix the metal plate to control the sinking of the chair. Step 1: Adjust the seat to the desired height, and wipe the hydraulic oil on the exposed surface of the hydraulic rod（Keeps hydraulic rods and sheet metal dry） . Step 2: Install the metal plate and rubber gasket, and clamp them to the lowest and fix it with screws. Step 3: Use a hexagonal wrench to twist the screw vigorously and fix it, try to sit and fine-tune it..
The sinking chair fix kit is made of 304 stainless steel, which is durable and easier to install than plastic models. After installation, it can still rotate normally (plastic models cannot) to achieve adjustable height without changing the cylinder. The included hexagonal wrench is made of 45# steel, quenched and hardened, so that the screws can be tightened better..
Package includes: 1 X 304 stainless steel sinking chair fix kit, 1 X hexagonal wrench..

Check Stock

Starfire Premium Lubricants AW 32 Hydraulic Oil, 5 Gallon, Pail

Sinopec Antiwear Hydraulic Oil L-HM is a line of premium quality antiwear lubricants blended using selected and carefully refined high-quality mineral oils, combined with a multifunctional additive system and available in a wide viscosity range from ISO Grade 32 to 150. This line of oils has been designed to meet the requirements of major hydraulic pump manufacturers, and its applications include hydraulic systems used in industrial and marine applications as well as in mobile machinery..
Compare to: Mobil DTE 25, Shell Tellus S2 M 46, Exxon Humble Hydraulic 46, Texaco Rando HD 46, Chevron Rykon 46 Oil, Conoco Super 46 Hydraulic, Clarity 46 Hydraulic Oil, Nuto H 46.
Certifications: ISO 11158-HM, DIN 51524 Part 2, Cincinnati 70, Easton Vickers M-2950-S and I-286-S, Parker-Denision HF-0.
Oem equivalent part number: Cincinnati Lamb P-70, DIN 51524 Pt 2, Eaton Vickers M-2950S, Parker Denison HF-1.

Check Stock