ReviewsHydraulic Tensioned Nuts

VIS Copper Flare Gasket, 45 Degree Flared Fitting, Fit 3/8\ Tube OD (Pack of 10)

  • All washers are copper construction, perfect for metal-to-metal seal..
  • Forged nuts for refrigeration applications, fit 3/8" O.D. tube.
  • Gaskets use with chopper, brass, aluminum and welded steel hydraulic tubing that can be 45-degree flared.
  • Functional requirements of sea J512 & sea J513.
Check Stock

OTC 1266 Fully Adjustable Gland Nut Wrench for Farm and Construction Equipment

  • Fully adjustable, 2 to 6 inch (pin to pin) capacity, Gland Nut Wrench fits hydraulic cylinder gland nuts on most farm and construction equipment.
  • Reversible pins are sized at 1/4 inch and 5/16 inch to accommodate most applications.
  • Designed for use with a 3/4 inch drive ratchet or breaker bar, this tool can take the torque you dish out.
  • High-grade materials ensure quality performance over the lifetime of the tool.
  • Replacement pins (No. 204928) are available separately.
Check Stock

KARSSIT Electric Car Jack kit 5 ton 12V Car Jack Hydraulic with Impact Wrench Portable Hydraulic Floor Jack 2 in 1 kit

  • 【5T Cars Changing Tire】This Electric Hydraulic Jack suitable for vehicles under 5T (11,000 lbs) for tire changing. Equipped with powerful electric motor, it takes less then 2 minutes to lift the cars. The Lifting height range: 6.1-17.7 inch(155mm-450mm). Non-slip cross groove design. It Matches nearly all the vehicles that less than 5 ton like cars, SUV, sedan,pick up,truck. It is a good helper when you need change tire not only in roadside emergencies but also at home garage repairing..
  • 【2 in 1 Kit】This hydraulic jack is a two-in-one set with 1pc 5T electric hydraulic jack & 1pc electric impact wrench,including 1pc safety hammer/1pc 3.5m power cable/1pc battery clamp jumper cable/2 spare fuses/1 pair of gloves/2pc user manual/1pc tool case etc.The electric impact wrench is DC 12V ,Rated power 80w,Max Torque 480N/M,equipped with two sockets (17/19 mm & 21/23 mm), to matching more vehicles with different size of lug nuts in the market..
  • 【Easy to Use Necessity in car trunk】Only has a vertical lift control switch makes the panel easily understand and operate. Car jack 5 ton will automatically stop lifting after reaching the height limit.self-locking....
Check Stock

OEMTOOLS 25556 Flywheel Turner, Flexplate Tool, Flywheel Wrench, Sure Grip Flywheel Turning Tool, Flywheels Specialty Tools, Engine Rotating Tool

  • SIMPLE REMOVAL TOOL: Our flywheel locking tool grabs the teeth of your flywheel or flexplate providing torque to quickly remove or install the car flywheel or flexplate.
  • Our turner helps you apply proper torque to nuts during flywheel installation.
  • COMPLETE ENGINE ACCESS: Sometimes it takes a specialty tool to get all of your engine work done efficiently.
  • This flywheel removal tool will remove flexplates and flywheels so that you can service clutches, transmission, and rotate the crackshaft.
  • FLYWHEEL HOLDER: Removing your flywheel bolt or torquing the harmonic balancer bolts can be a nightmare without a flywheel key.
  • Lock your car’s flywheel sprocket or flexplate in position to get adequate nut torque for removal and installation jobs.
  • COMFORTABLE FLYWHEEL PULLER: Working beneath your vehicle is uncomfortable.
  • Let this flywheel turning wrench’s sure grip handle keep you locked on the flywheel teeth without hand slippage during torquing.
  • This flywheel tool folds for easy storage.
  • SPECIALTY WORKING TOOL: Other tools can’t handle the pressure of removing your flywheel.
  • Our spring tensioned flywheel remover keeps your flywheel turning wrench securely engaged while torquing the harmonic and car flywheel bolts.
Check Stock

KARSSIT 5 ton Electric car Jack kit with Impact Wrench 12V Hydraulic Car Jack for SUV MPV Sedans Truck 2in1 car toos

  • 【5T Cars Changing Tire】:This Electric Hydraulic Jack suitable for vehicles under 5T (11,000 lbs) for tire changing. Equipped with powerful electric motor, it takes less then 2 minutes to lift the cars. The Lifting height range: 6.1-20.86 inch(155mm-530mm). Non-slip cross groove design. It Matches nearly all the vehicles that less than 5 ton like cars, SUV, sedan,pick up,truck. It is a good helper when you need change tire not only in roadside emergencies but also at home garage repairing..
  • 【2 in 1 Kit】：This hydraulic jack is a two-in-one set with 1pc 5T electric hydraulic jack & 1pc electric impact wrench,including 1pc 530mm head for car,1pc safety hammer/1pc 3.5m power cable/1pc battery clamp jumper cable/2 spare fuses/1 pair of gloves/2pc user manual/1pc tool case etc.The electric impact wrench is DC 12V ,Rated power 80w,Max Torque 480N/M,equipped with two sockets (17/19 mm & 21/23 mm), to matching more vehicles with different size of lug nuts in the market..
  • 【Easy to Use Necessity in car trunk】Only has a vertical lift control switch makes the panel easily understand and operate. Car jack 5 ton will automatically stop lifting after reaching the height limit.self-locking function to protect car not fallen-down during use if cut-off power....
Check Stock

Hydraulic Valve 2 Spool, Hydraulic Directional Control Valve, 11GPM Hydraulic Joystick Control Valve for Tractors Loaders, Double Acting Cylinder Spool

  • Hydraulic directional control valve comes with 2 spool and #8 BSPP in/out ports, and the 2 spool hydraulic joystick fits for small tractors, tractors loaders, log splitters, and so on..
  • Hydraulic control valve 2 spool for operating double acting cylinders. Durable cast iron construction provides long-term usage..
  • The hydraulic valve 2 spool, hydraulic control valve for tractor loader, all spools standard come with spring return, which can return to the neutral position..
  • The hydraulic spool control valve's relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM. The hydraulic valve 2 spool replacement for hydraulic control valve 2 spool, hydraulic directional control valve, hydraulic spool control valve, joystick hydraulic valve, 2 spool hydraulic joystick, hydraulic control valve for tractor loader, hydraulic joystick control, hydraulic loader valve joystick, hydraulic loader control valve joystick..
  • You will get 1pcs 2 spool hydraulic control valve. We provide the best after-sales service, if you have any questions, please feel free to contact us, we are happy to serve you..
Check Stock

IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 12-Inch, 40T (14080)

  • Table saw blade features #400 grit diamond-ground teeth for a smooth finish.
  • Precision-tensioned and balanced table saw blade for an accurate cut.
  • Construction-grade carbide teeth on these table saw blades for longer life.
  • 40 teeth and 20° hook angle with ATB grind.
Check Stock

4LIFETIMELINES Fitting Assortment 3/16 Metric Tube Nut Union Adapter 9 SKU

  • The Metric Fitting Assortment, 9 SKU (36 Fittings), contains nine most popular metric fittings (tube nuts, unions, and adapters) for use when working with braking systems of Japanese and European vehicles..
  • Fitting Assortments are designed for specialty and general repair shops. Each assortment contains a specific collection of fast moving fittings that should be kept on hand when working with automotive hydraulic braking systems..
  • Assortments are packaged in shatter-resistant, see-through plastic trays. Locator labels on the inside lid make locating, selecting, and re-filling quick and easy..
  • Works with steel, copper nickel, copper coated steel, PVF-coated, and stainless steel lines.
  • Lifetime warranty included on all products purchased from 4Lifetime Lines.
Check Stock

Intbuying Hydraulic Folded Multi-Purpose Office Chair for Facial Spa Salon Black

  • This upscale facial bed has thick foam foot, seat and back rest cushions covered with easy-to-keep-clean and comfortable PVC vinyl material for years of durability..
  • The facial bed features a face cut-out pillow and well capable armrests (without Screws or an nuts)..
  • With adjustable head, back and leg rests, the back of the chair is adjustable upward for customer comfort, and the footrest is adjustable downward..
  • Features also include a heavy duty Plating base and Hydraulic pump and the bed swivels 360 degrees ..
  • This is really a very versatile facial table and is ideal for facials, skin care, massage that will hold up to years of use..
Check Stock

4LIFETIMELINES Fitting Assortment, Union, Adapter, 32 SKU, 3/16 Inch and 1/4 Inch Tube Nut

  • Contains all popular tube nuts, unions and adapters for working on and creating any 3/16" and 1/4" outside diameter brake lines for both inverted and bubble flares.
  • Fitting Assortments are designed for specialty and general repair shops. Each assortment contains a specific collection of fast moving fittings that should be kept on hand when working with automotive hydraulic braking systems..
  • Assortments are packaged in shatter-resistant, see-through plastic trays. Locator labels on the inside lid make locating, selecting, and re-filling quick and easy..
  • Lifetime warranty included on all products purchased from 4Lifetimelines.
Check Stock

Hein-Werner HW93291 Blue Premium Hydraulic Jack Oil - 1 Quart

  • Bio-Bottle Jack hydraulic fluid is a biobased, biodegradable and environmentally non-toxic hydraulic oil for use in general purpose hydraulic systems.
  • Specially designed to be a direct replacement for petroleum oil based hydraulic fluids in mobile and stationary hydraulic vane, piston and gear type pumps.
  • This patented technology provides superior oxidation stability and longer fluid life compared to other vegetable based hydraulic oils.
  • It meets or exceeds the requirements for type I, II and III hydraulic tools.
  • Bio-Bottle Jack hydraulic fluid is ultimately biodegradable1 vegetable based formula.
Check Stock